Comparative responses of welded joints to surface mechanical attrition treatment and shot peening

Surface Engineering - Tập 25 Số 1 - Trang 15-20 - 2009
D. Li1, H. N. Chen2, Hong Xu1
1State‐Key Laboratory of Chemical Engineering, School of Mechanical and Power Engineering East China University of Science and Technology Shanghai 200237 China
2Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China

Tóm tắt

Responses of welded joint of carbon steel to surface mechanical attrition treatment (SMAT) and shot peening (SP) were investigated. Experimental evidences showed that the microstructure of treated surface in the welded joint by means of SMAT was characterised by nanometre grains of about 13·6 nm in size and that of SP was characterised by highly dense dislocation configuration. The similar microhardness profiles with different peak values in the top surface were observed for three typical zones of welded joints processed by SMAT and SP. Compared with as welded specimens, SMAT and SP processes have improved the fatigue strength by as much as 61 and 36·3% respectively based on fatigue life 2×106 cycles. The observed enhanced fatigue behaviours of the welded joint processed by SMAT and SP should be attributed to the combined influences of compressive residual stress, work hardening, nanostructure and elimination of microdiscontinuities in the vicinity of welded joints.

Từ khóa


Tài liệu tham khảo

10.1016/j.ijfatigue.2007.12.002

10.1111/j.1460-2695.2007.01210.x

10.1016/S0142-1123(98)00031-0

Braid J. E. M., 1997, Weld. World, 39, 248

10.1016/j.ijfatigue.2005.02.001

10.1016/j.engstruct.2005.10.003

10.1016/S0142-1123(03)00151-8

10.1016/S1359-6454(02)00310-5

10.1016/S1359-6462(01)00738-2

10.1016/j.msea.2003.10.261

10.1016/j.actamat.2004.08.031

10.1016/S0043-1648(03)00055-3

10.1016/j.scriptamat.2008.05.003

10.1016/j.stam.2003.10.015

10.1103/PhysRevLett.87.135503

10.1016/j.jsv.2007.03.054

10.1007/s10853-006-0745-9

10.1046/j.1460-2695.2000.00287.x

Suresh S., 1991, ‘Fatigue of materials’

10.1115/1.3157599

10.1016/j.scriptamat.2006.01.049

Tian J. W., 2006, Mater. Sci. Eng. A, 468, 164

Thông tin
Thông tin xuất bản

Surface Engineering

Tập 25 Số 1

15-20

Thông tin tác giả