Reliability analysis of structural stainless steel design provisions

EN 1993-1-4, 2006

EN, 2002

Sedlacek, 2007, Use of safety factors for the design of steel structures according to the Eurocodes, Eng. Fail. Anal., 14, 434, 10.1016/j.engfailanal.2005.08.002

Groth, 1990, Statics of the mechanical strength of stainless steels — sheet

Leffler, 1990, A statical study of the mechanical properties of hot rolled stainless steel

Outokumpu, 2005, Standard Cr–Ni stainless steels

Outokumpu, 2005, Standard Cr–Ni–Mo stainless steels

Outokumpu, 2008, Duplex stainless steel

EN 10088-4, 2009

Byfield, 1988, An analysis of the true bending strength of steel beams, Proc. Inst. Civ. Eng. Struct. Build., 128, 188, 10.1680/istbu.1998.30125

Baddoo, 2000, Final report. ECSC project — development of the use of stainless steel in construction

AISC, 2013

Gardner, 2008, Discrete and continuous treatment of local buckling in stainless steel elements, J. Constr. Steel Res., 64, 1207, 10.1016/j.jcsr.2008.07.003

Gardner, 2004, Experiments on stainless steel hollow sections — part 1: material and cross-sectional behaviour, J. Constr. Steel Res., 60, 1291, 10.1016/j.jcsr.2003.11.006

Theofanous, 2009, Testing and numerical modelling of lean duplex stainless steel hollow section columns, Eng. Struct., 31, 3047, 10.1016/j.engstruct.2009.08.004

Afshan, 2013, Experimental study of cold-formed ferritic stainless steel hollow sections, J. Struct. Eng. ASCE, 139, 717, 10.1061/(ASCE)ST.1943-541X.0000580

Gardner, 2006, Structural design of high-strength austenitic stainless steel, Thin-Walled Struct., 44, 517, 10.1016/j.tws.2006.04.014

Young, 2003, Experimental investigation of cold-formed stainless steel columns, J. Struct. Eng. ASCE, 129, 169, 10.1061/(ASCE)0733-9445(2003)129:2(169)

Liu, 2003, Buckling of stainless steel square hollow section compression members, J. Constr. Steel Res., 59, 165, 10.1016/S0143-974X(02)00031-7

Young, 2006, Tests of cold-formed high strength stainless steel compression members, Thin-Walled Struct., 44, 224, 10.1016/j.tws.2006.01.006

Young, 2005, Behavior of cold-formed high strength stainless steel sections, J. Struct. Eng. ASCE, 131, 1738, 10.1061/(ASCE)0733-9445(2005)131:11(1738)

Rasmussen, 1993, Design of cold-formed stainless steel tubular members. I: columns, J. Struct. Eng. ASCE, 119, 2349, 10.1061/(ASCE)0733-9445(1993)119:8(2349)

Kuwamura, 2003, Local buckling of thin-walled stainless steel members, Steel Struct., 3, 191

Huang, 2012, Material properties of cold-formed lean duplex stainless steel sections, Thin-Walled Struct., 54, 72, 10.1016/j.tws.2012.02.003

Saliba, 2013, Cross-section stability of lean duplex stainless steel welded I:-sections, J. Constr. Steel Res., 80, 1, 10.1016/j.jcsr.2012.09.007

Young, 2002, Compression tests of stainless steel tubular members, J. Struct. Eng. ASCE, 128, 754, 10.1061/(ASCE)0733-9445(2002)128:6(754)

Burgan, 2000, Structural design of stainless steel members — comparison between Eurocode 3, part 1.4 and test results, J. Constr. Steel Res., 54, 51, 10.1016/S0143-974X(99)00055-3

Bardi, 2006, Plastic buckling of circular tubes under axial compression — part I: experiments, Int. J. Mech. Sci., 48, 830, 10.1016/j.ijmecsci.2006.03.005

Mirambell, 2000, On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation, J. Constr. Steel Res., 54, 109, 10.1016/S0143-974X(99)00051-6

Talja, 1995, Design of stainless steel RHS beams, columns and beam-columns

Gardner, 2004, Experiments on stainless steel hollow sections — part 2: member behaviour of columns and beams, J. Constr. Steel Res., 60, 1319, 10.1016/j.jcsr.2003.11.007

Zhou, 2005, Tests of cold-formed stainless steel tubular flexural members, Thin-Walled Struct., 43, 1325, 10.1016/j.tws.2005.06.005

Theofanous, 2010, Experimental and numerical studies of lean duplex stainless steel beams, J. Constr. Steel Res., 66, 816, 10.1016/j.jcsr.2010.01.012

Rasmussen, 1993, Design of cold-formed stainless steel tubular members. II: beams, J. Struct. Eng. ASCE, 119, 2368, 10.1061/(ASCE)0733-9445(1993)119:8(2368)

Theofanous, 2010, Ultimate response of stainless steel continuous beams, Thin-Walled Struct., 83, 115, 10.1016/j.tws.2014.01.019

Real, 2001

Kiymaz, 2005, Strength and stability criteria for thin-walled stainless steel circular hollow section members under bending, Thin-Walled Struct., 43, 1534, 10.1016/j.tws.2005.06.006

Talja, 1997, Test report on welded I and CHS beams, columns and beam-columns

Theofanous, 2009, Structural response of stainless steel oval hollow section compression members, Eng. Struct., 31, 922, 10.1016/j.engstruct.2008.12.002

Ala-Outinen, 2007, Stainless steel in fire (SSIF). Work package 3: members with class 4 cross-sections in fire

SCI, 1991, Tests on stainless steel materials

Van den Berg, 1988

Bredenkamp, 1995, The strength of stainless steel built-up I-section columns, J. Constr. Steel Res., 34, 131, 10.1016/0143-974X(94)00023-B

van Wyk, 1990, The lateral torsional buckling strength of doubly symmetric stainless steel beams

EN 1993-1-5, 2006

Saliba, 2014, Shear design recommendations for stainless steel plate girders, Eng. Struct., 59, 220, 10.1016/j.engstruct.2013.10.016

Estrada, 2008, Shear resistance in stainless steel plate girders with transverse and longitudinal stiffening, J. Constr. Steel Res., 64, 1239, 10.1016/j.jcsr.2008.07.013

Unosson, 2003, Stainless steel girders — resistance to concentrated loads and shear

EN 1993-1-8, 2005

Salih, 2011, Bearing failure in stainless steel bolted connections, Eng. Struct., 33, 549, 10.1016/j.engstruct.2010.11.013

Salih, 2010, Numerical investigation of net section failure in stainless steel bolted connections, J. Constr. Steel Res., 66, 1455, 10.1016/j.jcsr.2010.05.012