Performances Evaluation of Cecabase® RT in Warm Mix Asphalt Technology

AASHTO,:T283-03 (2003). Standard Method of Test for Resistance of Compacted Asphalt Mixture to Moisture Induced Damage, American Association of State Highway and Transportation Officials. AASHTO,:T321-07 (2007). Determining the Fatiuge Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending, American Association of State Highway and Transportation Officials. Anderson, R.M., G. Baumgardner, et al. (2008). Engineering Properties, Emissions, and Field Performance of Warm Mix Asphalt Technology, National Cooperative Highway Research Program (NCHRP). Carpenter, S.H. and W. R. Vavrik (2001). “Repeated triaxial testing during mix design for performance characterization”. Transportation Research Record(1767): 76-84. Ceca, (2009). “Cecabase RT.” Ceca Arkema Group [Cited May 2010: http://www.ceca.fr/sites/ceca/en/business/bitumen_additives/warm_coated_material/warm_coated_material.page]. Chapuis, R.P. and A. Gatien (1995). Temperature dependent tensile strength of asphalt mixtures in relation to field cracking data. Philadelphia, PA, USA, ASTM: 180-193. Chowdhury, A. and J. W. Button (2008). A Review of Warm mix asphalt, Texas Transportation Institute. Texas A&M University System. Report 473700-0080-1. D’Angelo, J., E. Harm, et al. (2008). Warm Mix Asphalt: European Practice, Office of International Programs, Office of Policy, Federal Highway Administration, U.S. Department of Transportation, American Association of State Highway and Transportation Officials, National Cooperative Highway Research Program. Daniel, J.S. and J. Fowler (2006). Performance of Warm Mix Asphalt. Davidson, J.K. (2008). Warm Asphalt Mix Technology: An Overview of the Process in Canada, Transportation Association of Canada. Gonzalez Leon, J.A., L. Grampre, et al. (2009). Warm-Mix Asphalts with Low-Dosage Chemical Additives, Transportation Research Board. Hurley, G.C. and B. D. Prowell (2006). “Evaluation of Evotherm For Use in Warm Mix Asphalt”. National Center for Asphalt Technology. Hurley, G.C., B.D. Prowell, et al. (2006). Evaluation of potential processes for use in warm mix asphalt, Savannah, GA, United States, Association of Asphalt Paving Technologist, White Bear Lake, MN 55110, United States. Mallick, R.B. and E. R. Brown (2004). “An evaluation of superpave binder aging methods.” International Journal of Pavement Engineering 5(1): 9-18. McKeon, B. (2006). Aspha-min in warm asphalt mixes. 51st Annual Convention of the National Asphalt Pavement Association. Lanham, Maryland. Prowell, B.D., G.C. Hurley, et al. (2007). Field Performance of Warm-Mix Asphalt at the NCAT Test Track. Transportation Research Board 86th Annual Meeting. Washington DC, United States. Vaitkus, A., D. Čygas, et al. (2009). “Analysis and Evaluation of Possibilities for the Use of Warm Mix Asphalt in Lithuania.” The Baltic Journal of Road and Bridge Engineering 4(2): 80-86. Witczak, M.W. (2007). Specification Criteria for Simple Performance Tests for Rutting. Tempe, Arizona, Arizona State University. Witczak, M.W., K. Kaloush, et al. (2002). Simple Performance Test for Superpave Mix Design, NCHRP Report 465, National Cooperative Highway Research Program.