Bayesian probabilistic seismic hazard analysis with respect to near-fault effects
Tóm tắt
Uniform hazard spectrum (UHS) provides a set of spectral accelerations at various periods which have the same probability of exceedance. In this research, UHS for Bojnord region was determined based on the Bayesian concept as a powerful approach in considering and combining randomness and uncertainties. Source-to-site geometry parameters were included in the seismic hazard analysis to consider the near-fault directivity effects. Results show that near-fault hazard spectra for rock and soil site conditions are 20% larger than ordinary ones at periods longer than 1 s, on average. It was shown that near-fault pulse effects can be approximately included by systemically multiplying ordinary UHS by a near-fault amplification factor. Two-point method modified with the near-fault amplification factor was used to construct design response spectra having the highest similarity with the calculated uniform hazard spectra on different soil site conditions. The parameters of the two-point spectrum found here are close to those of ASCE7, except that the long-period site coefficient for soft soil is 1.21 and 1.10 times those of ASCE7-10 and ASCE7-16, respectively.
Tài liệu tham khảo
Ambraseys, N., Douglas, J., Sarma, S., & Smit, P. (2005). Equations for the estimation of strong ground motions from shallow crustal earthquakes using data from Europe and the Middle East: horizontal peak ground acceleration and spectral acceleration. Bulletin of Earthquake Engineering, 3(1), 1–53.
Ambraseys, N. N., & Melville, C. P. (2005). A history of Persian earthquakes. Cambridge: Cambridge University Press.
Ansari, M. I., Kumar, A., & Chakrabarti, A. (2018). Static analysis of doubly curved singly ruled truncated FGM cone. Composite Structures, 184, 523–535.
ASCE. (2010). Minimum design loads for buildings and other structures. Reston: ASCE/SEI 7-10.
ASCE. (2016). Minimum design loads for buildings and other structures. Reston: ASCE/SEI 7-16.
Baker, J. W. An introduction to probabilistic seismic hazard analysis. (2008). Report for the US Nuclear Regulatory Commission, Version 1.
Baker, J. W., & Gupta, A. (2016). Bayesian treatment of induced seismicity in probabilistic seismic-hazard analysis. Bulletin of the Seismological Society of America, 106(3), 860–870.
Berberian, M. (1994). Natural hazards and the first earthquake catalogue of Iran. Tehran: International Institute of Earthquake Engineers and Seismology.
Campbell, K. W. (1982). Bayesian analysis of extreme earthquake occurrences. Part I. Probabilistic hazard model. Bulletin of the Seismological Society of America, 72(5), 1689–1705.
Campbell, K. W. (1983). Bayesian analysis of extreme earthquake occurrences. Part II. Application to the San Jacinto fault zone of southern California. Bulletin of the Seismological Society of America, 73(4), 1099–1115.
Chang, Z., Sun, X., Zhai, C., Zhao, J. X., & Xie, L. (2018). An empirical approach of accounting for the amplification effects induced by near-fault directivity. Bulletin of Earthquake Engineering, 16(5), 1871–1885.
Chaubey, A. K., Kumar, A., & Chakrabarti, A. (2017). Vibration of laminated composite shells with cutouts and concentrated mass. AIAA Journal, 56(4), 1662–1678.
Chaubey, A. K., Kumar, A., & Chakrabarti, A. (2018a). Novel shear deformation model for moderately thick and deep laminated composite conoidal shell. Mechanics Based Design of Structures and Machines, 46(5), 650–668.
Chaubey, A. K., Kumar, A., & Mishra, S. (2018b). Dynamic analysis of laminated composite rhombic elliptic paraboloid due to mass variation. Journal of Aerospace Engineering, 31(5), 04018059.
Cornell, C. A. (1968). Engineering seismic risk analysis. Bulletin of the Seismological Society of America, 58(5), 1583–1606.
Duane, S., Kennedy, A. D., Pendleton, B. J., & Roweth, D. (1987). Hybrid Monte Carlo. Physics letters B, 195(2), 216–222.
Esmaeilabadi, R., Shahri, A. A., Behzadafshar, K., Gheirati, A., & Nasrabadi, J. N. (2015). Frequency content analysis of the probable earthquake in Kopet Dagh region—Northeast of Iran. Arabian Journal of Geosciences, 8(6), 3833–3844.
Galanis, O. C., Tsapanos, T., Papadopoulos, G., & Kiratzi, A. (2002). Bayesian extreme values distribution for seismicity parameters assessment in South America. Journal of the Balkan Geophysical Society, 5(3), 77–86.
Ghasemi, H., Zare, M., Fukushima, Y., & Koketsu, K. (2009). An empirical spectral ground-motion model for Iran. Journal of Seismology, 13(4), 499–515.
Grünthal, G., Stromeyer, D., Bosse, C., Cotton, F., & Bindi, D. (2018). The probabilistic seismic hazard assessment of Germany—version 2016, considering the range of epistemic uncertainties and aleatory variability. Bulletin of Earthquake Engineering, 16, 1–57.
Haerifard, S., Jarahi, H., Pourkermani, M., & Almasian, M. (2018). Seismic hazard assessment at Esfaraen–Bojnurd railway, North–East of Iran. Geotectonics, 52(1), 151–156.
Hollingsworth, J., Jackson, J., Walker, R., Reza Gheitanchi, M., & Javad Bolourchi, M. (2006). Strike-slip faulting, rotation, and along-strike elongation in the Kopeh Dagh mountains, NE Iran. Geophysical Journal International, 166(3), 1161–1177.
Kumar, A., Chakrabarti, A., Bhargava, P., & Prakash, V. (2014). Efficient failure analysis of laminated composites and sandwich cylindrical shells based on higher-order zigzag theory. Journal of Aerospace Engineering, 28(4), 04014100.
McGuire, R. K. (2004). Seismic hazard and risk analysis. Oakland: Earthquake Engineering Research Institute.
Mirzaei, N., Gao, M.-T., Chen, Y.-T., & Wang, J. (1997). A uniform catalog of earthquakes for seismic hazard assessment in Iran. Acta Seismologica Sinica, 10(6), 713–726.
Mohajer-Ashjai, A., & Nowroozi, A. A. (1978). Observed and probable intensity zoning of Iran. Tectonophysics, 49(3–4), 149–160.
Parvez, I. A. (2007). On the Bayesian analysis of the earthquake hazard in the North–East Indian peninsula. Natural Hazards, 40(2), 397–412.
Rahgozar, M. A., Amiri, G. G., & Saleh, M. (2012). Probabilistic assessment of PGA and UHS for Bojnurd city, the capital of north Khorasan province, Iran. Journal of Seismology and Earthquake Engineering, 14(1), 13–28.
Shahi, S. K., & Baker, J. W. (2013). A probabilistic framework to include the effects of near-fault directivity in seismic hazard assessment. Berkeley: Pacific Earthquake Engineering Research Center.
Somerville, P. Development of an improved representation of near fault ground motions. In SMIP98 Seminar on Utilization of Strong-Motion Data, 1998 (Vol. 15).
Standard No. 2800. (2014). Iranian code of practice for seismic resistant design of buildings. Tehran: Road, Housing and Urban Development Research Center.
Stavrakakis, G., & Drakopoulos, J. (1995). Bayesian probabilities of earthquake occurrences in Greece and surrounding areas. Pure and Applied Geophysics, 144(2), 307–319.
Stupazzini, M., Paolucci, R., & Igel, H. (2009). Near-fault earthquake ground-motion simulation in the Grenoble valley by a high-performance spectral element code. Bulletin of the Seismological Society of America, 99(1), 286–301.
Wang, Y., Zhang, K., Gan, Q., Zhou, W., Xiong, L., Zhang, S., et al. (2015). Bayesian probabilities of earthquake occurrences in Longmenshan fault system (China). Journal of Seismology, 19(1), 69–82.
Yadav, R., Tsapanos, T., Bayrak, Y., & Koravos, G. C. (2013). Probabilistic appraisal of earthquake hazard parameters deduced from a Bayesian approach in the northwest frontier of the Himalayas. Pure and Applied Geophysics, 170(3), 283–297.
Yahyaabadi, A., Adibi, M., & Bakavoli, M. K. (2017). Analytical assessment of Bojnord earthquake on May 2017. Farsi: University of Bojnord.
Yahyaabadi, A., & Tehranizadeh, M. (2012). Development of an improved intensity measure in order to reduce the variability in seismic demands under near-fault ground motions. Journal of Earthquake and Tsunami, 6(02), 1250012.
Yazdani, A., & Kowsari, M. (2013). Bayesian estimation of seismic hazards in Iran. Scientia Iranica, 20(3), 422–430.