Structural integrity of 3D-printed prosthetic sockets: Experimental study for paediatric applications

Comotti, 2015, Multi-material design and 3D printing method of lower limb prosthetic sockets, ACM Int. Conf. Proceeding Ser., 42 Lucak, 2019, Dimensions of the paediatric femur: anatomical limitations of flexible intramedullary nailing, J. Child. Orthop., 13, 220, 10.1302/1863-2548.13.180194 Colombo, 2010, A new design paradigm for the development of custom-fit soft sockets for lower limb prostheses, Comput, For Ind, 61, 513 Chen, 2016, Additive manufacturing of custom orthoses and prostheses-A review, Addit Manuf, 12, 77 Jin, 2015, Additive manufacturing of custom orthoses and prostheses - a review, Procedia CIRP, 36, 199, 10.1016/j.procir.2015.02.125 Herbert, 2005, A preliminary investigation into the development of 3-D printing of prosthetic sockets, J Rehabil Res Dev, 42, 141, 10.1682/JRRD.2004.08.0134 Nguyen, 2018, Systematic review of prosthetic socket fabrication using 3D printing, ACM Int. Conf. Proceeding Ser. Part, F1376, 137 Gariboldi, 2022, Structural testing of lower-limb prosthetic sockets: a systematic review, Med Eng Phys, 99, 10.1016/j.medengphy.2021.103742 Golovin, 2020, 124 McGrath, 2017, Development of a residuum/socket interface simulator for lower limb prosthetics, Proc Inst Mech Eng Part H J Eng Med, 231, 235, 10.1177/0954411917690764 2006, Prosthetics -- structural testing of lower-limb, Prostheses -- Requirements and Test Methods, 3 Marinopoulos, 2022, Structural integrity of 3D-printed prosthetic sockets: an experimental study for paediatric above-knee applications, Procedia Struct Integr, 37, 139, 10.1016/j.prostr.2022.01.069 Owen, 2020, Transtibial prosthetic socket strength: the use of ISO 10328 in the comparison of standard and 3D-printed sockets, J. Prosthetics Orthot., 32, 93, 10.1097/JPO.0000000000000306 Pousett, 2019, An Investigation of the structural strength of transtibial sockets fabricated using conventional methods and rapid prototyping techniques, Can. Prosthetics Orthot. J., 2 Goh, 2002, Structural integrity of polypropylene prosthetic sockets manufactured using the polymer deposition technique, Proc Inst Mech Eng Part H J Eng Med, 216, 359, 10.1243/095441102321032157 Current, 1999, Static structural testing of trans-tibial composite sockets, Prosthet Orthot Int, 23, 113, 10.3109/03093649909071622 Gerschutz, 2012, Definitive laminated sockets, J Rehabil Res Dev, 49, 405, 10.1682/JRRD.2011.05.0091 Schmidt, 2015 2017 Gholizadeh, 2019, Mechanical evaluation of unity elevated vacuum suspension system, Can. Prosthetics Orthot. J., 2, 192 Tang, 2015, Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture, Med Eng Phys, 37, 1162, 10.1016/j.medengphy.2015.10.004 Atakok, 2022, Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: a statistical investigation, J Mater Res Technol, 18, 1542, 10.1016/j.jmrt.2022.03.013 Moetazedian, 2021, Bulk-material bond strength exists in extrusion additive manufacturing for a wide range of temperatures, speeds, and layer times, 3D Print Addit Manuf, 1 Khosravani, 2022, Fracture behavior of anisotropic 3D-printed parts: experiments and numerical simulations, J Mater Res Technol, 19, 1260, 10.1016/j.jmrt.2022.05.068 J. Allum, A. Moetazedian, A. Gleadall, N. Mitchell, T. Marinopoulos, I. McAdam, S. Li, V.V. Silberschmidt, Extra-wide deposition in extrusion additive manufacturing: a new convention for improved interlayer mechanical performance, Addit Manuf 61 (2023), 103334. DOI: 10.1016/j.addma.2022.103334. Campbell, 2018, How infill percentage affects the ultimate strength of a 3D-printed transtibial socket, Can. Prosthetics Orthot. J., 1