Environmental effect on fatigue life of glass–epoxy composite pipes subjected to impact loading

Demianouchko, 1997, Stress state analyses of a ±55° filament-wound composite tube with damage effect, Compos Struct, 37, 233, 10.1016/S0263-8223(97)80015-3 Bakaiyan, 2009, Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations, Compos Struct, 88, 532, 10.1016/j.compstruct.2008.05.017 Ansari, 2010, Dynamic analysis of multi-layered filament-wound composite pipes subjected to cyclic internal pressure and cyclic temperature, Compos Struct, 92, 1100, 10.1016/j.compstruct.2009.09.058 Azzam BS, Muhammad MAA, Mokhtar MOA, Kolkailah FA. Comparison between analytical and experimental failure behavior of a proposed design for the filament-wound composite pressure vessels. Current Advances in Mechanical Design & Production. In: Sixth Cairo university international MDP conference, Cairo; January 1996. p. 323–32. Kam, 1997, First-ply failure strength of laminated composite pressure vessels, Compos Struct, 38, 65, 10.1016/S0263-8223(97)00042-1 Sun, 1999, Bursting problem of filament wound composite pressure vessels, Int J Pres Ves Pip, 76, 55, 10.1016/S0308-0161(98)00096-9 Onder, 2009, Burst failure load of composite pressure vessels, Compos Struct, 89, 159, 10.1016/j.compstruct.2008.06.021 Karakuzu R, Deniz ME, Icten BM. Environmental effects on fatigue life of impacted composite pipes. In: International conference on composites testing and model identification. Lausanne; February 2011. p. 143–4. Wu, 2010, Modal analysis for filament wound pressure vessels filled with fluid, Compos Struct, 92, 1994, 10.1016/j.compstruct.2009.12.011 Meijer, 2008, A failure envelope for ±60° filament wound glass fibre reinforced epoxy tubulars, Compos Part A – Appl Sci Technol, 39, 555, 10.1016/j.compositesa.2007.11.002 Matemilola, 1997, Impact response of composite cylinders, Int J Solids Struct, 34, 2669, 10.1016/S0020-7683(96)00163-1 Kaneko, 2008, Finite element method failure analysis of a pressurized FRP cylinder under transverse impact loading, Thin Wall Struct, 46, 898, 10.1016/j.tws.2008.01.016 Matemilola, 1997, Low-speed impact damage in filament-wound CFRP composite pressure vessels, J Press Vess – T Asme, 119, 435, 10.1115/1.2842327 Curtis, 2000, Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation, Compos Part B Eng, 31, 419, 10.1016/S1359-8368(00)00014-7 Chang, 2003, Burst tests of filament-wound graphite–epoxy tubes, J Compos Mater, 37, 811, 10.1177/002199803031032 Gning, 2005, Prediction of damage in composite cylinders after impact, J Compos Mater, 39, 917, 10.1177/0021998305048733 Wakayama, 2006, Evaluation of burst strength of FW–FRP composite pipes after impact pitch-based low-modulus carbon fiber, Compos Part A – Appl Sci Technol, 37, 2002, 10.1016/j.compositesa.2005.12.010 Tarakcioglu, 2001, Strength of filament wound GRP pipes with surface crack, Compos Part B – Eng, 32, 131, 10.1016/S1359-8368(00)00037-8 Tarakcioglu, 2007, The fatigue behavior of [±55°]3 filament wound GRP pipes with a surface crack under internal pressure, Compos Struct, 80, 207, 10.1016/j.compstruct.2006.05.015 Avci, 2007, Fatigue behavior of surface cracked filament wound pipes with high tangential strength in corrosive environmental, Compos Part A – Appl Sci Technol, 38, 1192, 10.1016/j.compositesa.2006.04.011 Tarfaoui, 2007, Residual strength of damaged glass/epoxy tubular structures, J Comp Mater, 41, 2165, 10.1177/0021998307074144 Sahin, 2009, Fatigue crack growth behavior of filament wound composite pipes in corrosive environment, J Reinf Plast Comp, 28, 2957, 10.1177/0731684408094068 Samanci, 2008, Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure, J Mater Sci, 43, 5569, 10.1007/s10853-008-2820-x Arikan, 2010, Failure analysis of [±55°]3 filament wound composite pipes with an inclined surface crack under static internal pressure, Compos Struct, 92, 182, 10.1016/j.compstruct.2009.07.027 Tarakcioglu, 2005, Fatigue failure behavior of glass/epoxy ±55° filament wound pipes under internal pressure, Compos Sci Technol, 65, 703, 10.1016/j.compscitech.2004.10.002 Gemi, 2009, Progressive fatigue behavior of glass/epoxy [±75°]2 filament-wound pipes under pure internal pressure, Mater Des, 30, 4293, 10.1016/j.matdes.2009.04.025 Bie, 2009, Fatigue life evaluation of high pressure hydrogen storage vessel, Int J Hydrogen Energy, 35, 2633, 10.1016/j.ijhydene.2009.04.037 Ellyin, 2004, Environmental effects on the mechanical properties of glass–fiber epoxy composite tubular specimens, Compos Sci Technol, 34, 1863, 10.1016/j.compscitech.2004.01.017 Sari, 2011, Residual failure pressures and fatigue life of filament wound composite pipes subjected to lateral impact, J Comp Mater