Rheology behavior of one-part alkali activated slag/glass powder (AASG) pastes

Scrivener, 2008, Innovation in use and research on cementitious material, Cem. Concr. Res., 38, 128, 10.1016/j.cemconres.2007.09.025 Bosoaga, 2009, CO2 capture technologies for cement industry, Energy Procedia, 1, 133, 10.1016/j.egypro.2009.01.020 Luukkonen, 2018, One-part alkali-activated materials: A review, Cem. Concr. Res., 103, 21, 10.1016/j.cemconres.2017.10.001 Turner, 2013, Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete, Constr. Build. Mater., 43, 125, 10.1016/j.conbuildmat.2013.01.023 Yang, 2013, Assessment of CO2 reduction of alkali-activated concrete, J. Cleaner Prod., 39, 265, 10.1016/j.jclepro.2012.08.001 Wetzel, 2019, Influence of silica fume on properties of fresh and hardened ultra-high performance concrete based on alkali-activated slag, Cem. Concr. Compos., 100, 53, 10.1016/j.cemconcomp.2019.03.023 Provis, 2018, Alkali-activated materials, Cem. Concr. Res., 114, 40, 10.1016/j.cemconres.2017.02.009 Singh, 2015, Geopolymer concrete: A review of some recent developments, Constr. Build. Mater., 85, 78, 10.1016/j.conbuildmat.2015.03.036 Panda, 2018, Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing, Cem. Concr. Compos., 94, 307, 10.1016/j.cemconcomp.2018.10.002 Romagnoli, 2012, Rheology of geopolymer by DOE approach, Constr. Build. Mater., 36, 251, 10.1016/j.conbuildmat.2012.04.122 Palacios, 2008, Rheology and setting of alkali-activated slag pastes and mortars: Effect of organic admixtures, ACI Mater. J., 105, 140 Criado, 2009, Alkali activated fly ash: effect of admixtures on paste rheology, Rheol. Acta, 48, 447, 10.1007/s00397-008-0345-5 Laskar, 2011, Rheology of fly ash based geopolymer concrete, ACI Mater. J., 108, 536 Puertas, 2014, Rheology of alkali-activated slag pastes Effect of the nature and concentration of the activating solution, Cem. Concr. Compos., 53, 279, 10.1016/j.cemconcomp.2014.07.012 Albar, 2020, Effective extrusion-based 3D printing system design for cementitious-based materials, Res. Eng., 6 Mollah, 2000, A review of cement–superplasticizer interactions and their models, Adv. Cem. Res., 12, 153, 10.1680/adcr.2000.12.4.153 Palacios, 2004, Stability of superplasticizers and shrinkage-reducing admixtures in high basic media, Materiales de Construcción, 276, 65 Palacios M, Houst Y F, Bowen P, Puertas, F Adsorption of superplasticizer admixtures on alkali-activated slag pastes. Cement and Concrete Research, 39 (2009) 670-677. Luukkonen, 2019, Suitability of commercial superplasticizers for one-part alkali-activated blast-furnace slag mortar, J. Sustain. Cem. Based Mater., 8, 244, 10.1080/21650373.2019.1625827 Hasnaoui, 2019, Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars, Constr. Build. Mater., 198, 10, 10.1016/j.conbuildmat.2018.11.251 Provis, 2014, Geopolymers and other alkali activated materials: why, how, and what?, Mater. Struct., 47, 11, 10.1617/s11527-013-0211-5 Nematollahi, 2015, Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate, Ceram. Int., 4, 5696, 10.1016/j.ceramint.2014.12.154 Duxson, 2008, Designing precursors for geopolymer cements, J. Am. Ceram. Soc., 91, 3864, 10.1111/j.1551-2916.2008.02787.x Ling, 2014, Use of recycled CRT funnel glass as fine aggregate in dry mixed concrete paving blocks, J. Cleaner Prod., 68, 209, 10.1016/j.jclepro.2013.12.084 Ling, 2011, Feasibility of using recycled glass in architectural cement mortars, Cem. Concr. Compos., 33, 848, 10.1016/j.cemconcomp.2011.05.006 Ling, 2013, Management and recycling of waste glass in concrete products: Current situations in Hong Kong, Resour. Conserv. Recycl., 70, 25, 10.1016/j.resconrec.2012.10.006 Islam, 2017, Waste glass powder as partial replacement of cement for sustainable concrete practice, International Journal of Sustainable Built Environment, 6, 37, 10.1016/j.ijsbe.2016.10.005 Carsana, 2014, Comparison of ground waste glass with other supplementary cementitious materials, Cem. Concr. Compos., 45, 39, 10.1016/j.cemconcomp.2013.09.005 Aliabdo, 2016, Utilization of waste glass powder in the production of cement and concrete, Constr. Build. Mater., 124, 866, 10.1016/j.conbuildmat.2016.08.016 Puertas F, Torres-Carrasco M. Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterization. Cement and Concrete Research, 57(2014) 95-104. Vinai, 2019, Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders, Cem. Concr. Res., 116, 45, 10.1016/j.cemconres.2018.11.008 Pascual, 2014, Waste Glass Powder-Based Alkali-Activated Mortar, Int. J. Res. Eng. Technol., 3, 32 Zhang, 2017, Waste glass as partial mineral precursor in alkali-activated slag/fly ash system, Cem. Concr. Res., 102, 29, 10.1016/j.cemconres.2017.08.012 Lu, 2018, Use of waste glass in alkali activated cement mortar, Constr. Build. Mater., 160, 399, 10.1016/j.conbuildmat.2017.11.080 Abdollahnejad, 2019, Effects of waste ground glass and lime on the crystallinity and strength of geopolymers, Mag. Concr. Res., 71, 1218, 10.1680/jmacr.18.00300 Xuan, 2019, MSWIBA-based cellular alkali-activated concrete incorporating waste glass powder, Cem. Concr. Compos., 95, 128, 10.1016/j.cemconcomp.2018.10.018 He, 2020, A ternary optimization of alkali-activated cement mortars incorporating glass powder, slag and calcium aluminate cement, Constr. Build. Mater., 240, 10.1016/j.conbuildmat.2019.117983 Administration of the People's Republic of China (SAC). (2012). Method for testing uniformity of concrete admixture. GB/T 8077-2012. British Standards Institution. (1999) Methods of test for mortar for masonry — Part 3: Determination of consistence of fresh mortar (by flow table). BS EN 1015-3. British Standards Institution. (2016) Methods of testing cement Part 3: Determination of setting times and soundness. BS EN 196-3. Peng, 2014, Rheological models for fresh cement asphalt paste, Constr. Build. Mater., 71, 254, 10.1016/j.conbuildmat.2014.08.031 Nehdi, 2004, Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction, Cem. Concr. Res., 34, 1993, 10.1016/j.cemconres.2004.02.020 Roussel, 2010, Steady state flow of cement suspensions: A micromechanical state of the art, Cem. Concr. Res., 40, 77, 10.1016/j.cemconres.2009.08.026 Roussel, 2015, Recent advances on polymers and fresh concrete properties, J. Chin. Ceram. Soc., 43, 1401 Zhang, 2018, Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers, Powder Technol., 330, 219, 10.1016/j.powtec.2018.02.014 Zingg, 2008, Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases, J. Colloid Interface Sci., 323, 301, 10.1016/j.jcis.2008.04.052 Kashani, 2014, The interrelationship between surface chemistry and rheology in alkali activated slag paste, Constr. Build. Mater., 65, 583, 10.1016/j.conbuildmat.2014.04.127 Zhang, 2019, Effect of bubble feature parameters on rheological properties of fresh concrete, Constr. Build. Mater., 196, 245, 10.1016/j.conbuildmat.2018.11.088 Konijn, 2014, Experimental study of the viscosity of suspensions: Effect of solid fraction, particle size and suspending liquid, Powder Technol., 266, 61, 10.1016/j.powtec.2014.05.044 Zhang, 2018, Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content, Constr. Build. Mater., 187, 674, 10.1016/j.conbuildmat.2018.07.205 Roussel, 2006, Correlation between yield stress and slump: comparison between numerical simulations and concrete rheometers results, Mater. Struct., 39, 501, 10.1617/s11527-005-9035-2 Hanjitsuwan, 2014, Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste, Cem. Concr. Compos., 45, 9, 10.1016/j.cemconcomp.2013.09.012 Taghvayi, 2018, The effect of alkali concentration and sodium silicate modulus on the properties of alkali-activated slag concrete, J. Adv. Concr. Technol., 16, 293, 10.3151/jact.16.293 Karakoç, 2014, Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar, Constr. Build. Mater., 72, 283, 10.1016/j.conbuildmat.2014.09.021 Yip, 2005, The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation, Cem. Concr. Res., 9, 1688, 10.1016/j.cemconres.2004.10.042 Liu, 2019, Waste glass as binder in alkali activated slag–fly ash mortars, Mater. Struct., 5, 1 Cao, 2018, Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature, Constr. Build. Mater., 191, 242, 10.1016/j.conbuildmat.2018.09.204 Yang, 2019, Development of strength for calcium aluminate cement mortars blended with GGBS, Adv. Mater. Sci. Eng., 2019, 1 Correa-Yepes, 2018, Effect of fly ash and silica fume on rheology, compressive strength and self-compacting in cement mixtures, DYNA, 206, 59, 10.15446/dyna.v85n206.68960 Prud Homme, 2010, Silica fume as porogent agent in geo-materials at low temperature, J. Eur. Ceram. Soc., 7, 1641, 10.1016/j.jeurceramsoc.2010.01.014 Luna-Galiano, 2018, Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties, J. Non-Cryst. Solids, 500, 196, 10.1016/j.jnoncrysol.2018.07.069