Effects of post-processing on the fracture behavior of surface-treated 3D-printed parts

Park, 2020, 3D Printing of Bio-based Polycarbonate and Its Potential Applications in Ecofriendly Indoor Manufacturing, Additive Manufacturing, 31, 10.1016/j.addma.2019.100974 Khosravani, 2022, Large-scale Automated Additive Construction: Overview, Robotic Solutions, Sustainability, and Future Prospect, Sustainability, 14, 9782, 10.3390/su14159782 Ghorbani, 2020, 3D Printing of a Cellular Scaffolds for Bone Defect Regeneration: A Review, Materials Today Communications, 22, 10.1016/j.mtcomm.2020.100979 Jian, 2021, Crack Initiation Behavior and Fatigue Performance Up to Very-high-cycle Regime of AlSi10Mg Fabricated by Selective Laser Melting With Two Powder Sizes, International Journal of Fatigue, 143, 10.1016/j.ijfatigue.2020.106013 Razaviye, 2022, An Investigation on Mechanical Properties of PA12 parts produced by aSLS 3D Printer: An Experimental Approach, CIRP Journal of Manufacturing Science and Technology, 38, 760, 10.1016/j.cirpj.2022.06.016 Wits, 2016, Porosity Testing Methods for The Quality Assessment of Selective Laser Melted Parts, CIRP Annals, 65, 201, 10.1016/j.cirp.2016.04.054 Khosravani, 2020, On the Environmental Impacts of 3D Printing Technology, Applied Materials Today, 20, 10.1016/j.apmt.2020.100689 Jafari, 2020, Liebold, Phase Change Heat Transfer Characteristics of an Additively Manufactured Wick for Heat Pipe Applications, Applied Thermal Engineering, 76 Salvadori, 2013, Energy Dissipation in The Mixed Mode Growth of Cracks Atthe Interface Between Brittle Materials, International Journal of Fracture, 181, 257, 10.1007/s10704-013-9845-0 Strantza, 2017, Acoustic Emission Monitoring of Crack Propagation in Additively Manufactured and Conventional Titanium Components, Mechanics Research Communications, 84, 8, 10.1016/j.mechrescom.2017.05.009 Alanazi, 2020, Estimating Static/dynamic Strength of Notched Unreinforced Concrete Under Mixed-mode I/II Loading, Engineering Fracture Mechanics, 240, 10.1016/j.engfracmech.2020.107329 Khosravani, 2021, Structural Integrity of Adhesively Bonded 3D-printed Joints, Polymer Testing, 100, 10.1016/j.polymertesting.2021.107262 Li, 2023, Effect of Surface Quality on the Fracture Behavior of 3D Printed Lattice Structures, CIRP Journal of Manufacturing Science and Technology, 43, 170, 10.1016/j.cirpj.2023.04.002 Liu, 2019, Plastic Damage of Additive Manufactured Aluminium With Void Defects, Mechanics Research Communications, 95, 45, 10.1016/j.mechrescom.2018.12.002 Khosravani, 2020, Fracture Behavior of Additively Manufactured Components: A Review, Theoretical and Applied Fracture Mechanics, 109, 10.1016/j.tafmec.2020.102763 Kiendl, 2020, Controlling Toughness and Strength of FDM 3D-printed PLA Components Through the Raster Layup, Composites Part B: Engineering, 180, 10.1016/j.compositesb.2019.107562 Nurizada, 2020, Induced Anisotropy in the Fracturing Behavior of 3D Printed Partsanalyzed by the Size Effect Method, Engineering Fracture Mechanics, 239, 10.1016/j.engfracmech.2020.107304 Daminabo, 2020, Fused Deposition Modeling-based Additive Manufacturing (3Dprinting): Techniques for Polymer Material Systems, Materials Today Chemistry, 16, 10.1016/j.mtchem.2020.100248 Yadav, 2020, Optimization of FDM 3D Printing Process Parameters for Multi-materialusing Artificial Neural Network, Materials Today: Proceedings, 162, 263 Reyna, 2022, Mechanical Properties Optimization for PLA, ABS and Nylon + CF Manufactured by 3D FDM Printing, Materials Today Communications, 33 Rajput, 2023, A Post Processing Technique to Achieve Nanofinishing for Functionality Enhancement of Ti-6Al-4V Femoral Head Fabricated by Laser Powder Bed Fusion, CIRP Journal of Manufacturing Science and Technology, 41, 99, 10.1016/j.cirpj.2023.06.006 Vidakis, 2023, Optimization of Key Quality Indicators in Material Extrusion 3D Printing of Acrylonitrile Butadiene Styrene: The Impact of Critical Process Control Parameters on the Surface Roughness, Dimensional Accuracy, and Porosity, Materials Today Communications, 34, 10.1016/j.mtcomm.2022.105171 Cao, 2023, Effect of Post-process Treatments on Mechanical Properties and Surface Characteristics of 3D Printed Short Glass Fiber Reinforced PLA/TPU Using the FDM Process, CIRP Journal of Manufacturing Science and Technology, 41, 135, 10.1016/j.cirpj.2022.12.008 Kuo, 2016, Development of a Precision Surface Polishing System for Parts Fabricated by Fused Deposition Modeling, Materials and Manufacturing Processes, 31, 1113, 10.1080/10426914.2015.1090594 Garg, 2017, Chemical Vapor Treatment of ABS Parts Built by FDM: Analysis of Surface Finish and Mechanical Strength, The International Journal of Advanced Manufacturing Technology, 89, 2175, 10.1007/s00170-016-9257-1 ASTM D638 - 14 Standard Test Method for Tensile Properties of Plastics, Standard, American Society for Testing Materials, West Conshohocken, USA (2014). PolyLite ABS Technical Data Sheet, 〈https://eu.polymaker.com/〉, accessed: 12.01.2023. Chong, 1984, New Specimen for Fracture Toughness Determination for Rock and Other Materials, International Journal of Fracture, 26, 59, 10.1007/BF01157555 Li, 2018, The Effect of Process Parameters in Fused Deposition Modelling on Bonding Degree and Mechanical Properties, Rapid Prototyping Journal, 24, 129, 10.1108/RPJ-06-2016-0090 Allum, 2019, Fracture of 3D-printed Polymers: Crucial role of Filament-scale Geometric Features, Engineering Fracture Mechanics, 224 LorenzoBanuelos, 2020, Influence of Raster Orientation on the Determination of Fracture Properties of Polypropylene Thin Components Produced by Additive Manufacturing, Theoretical and Applied Fracture Mechanics, 107 M.D. Kuruppu, Y. Obara, M.R. Ayatollahi, K.P. Chong, T. Funatsu, ISRM-Suggested method for determining the mode I static fracture toughness usingsemi-circular bend specimen, Rock. Mech. Rock. Eng. 47 (2014)267–274. Williams, 1997, On the Stress Distribution at the Base of a Stationary Crack, Journal of Applied Mechanics, 24, 109, 10.1115/1.4011454 Taylor, 2004, The Effect of Stress Concentrations on the Fracture Strength of Polymethylmethacrylate, Materials Science and Engineering: A, 382, 288, 10.1016/j.msea.2004.05.012 Sedighi, 2019, Mechanical Behavior of an Additively Manufactured Poly-carbonate Specimen:tensile,flexural and Mode I Fractureproperties, Rapid Prototyping Journal, 26, 266, 10.1108/RPJ-03-2019-0055 Khosravani, 2022, Fracture Studies of 3D-printed Continuous Glass Fiber Reinforced Composites, Theoretical and Applied Fracture Mechanics, 119, 10.1016/j.tafmec.2022.103317 Ayatollahi, 2020, The Influence of In-plane Raster Angle on Tensile and Fracture Strengths of 3D-printed PLA Specimens, Engineering Fracture Mechanics, 237, 10.1016/j.engfracmech.2020.107225 Ameri, 2020, Fracture Loads Prediction of the Modified 3d-printed ABS Specimens Under Mixed-mode I/II Loading, Engineering Fracture Mechanics, 235, 10.1016/j.engfracmech.2020.107181