Enhancing drop mixing in powder bed by alternative particle arrangements with contradictory hydrophilicity

Chen, 2021, Using office inkjet printer to develop paper-based electrowetting-on-dielectric micromixer based on capillary wave-induced droplet vibration mixing for the reproducibility improvement of chemiluminescence assays, J Taiwan Inst Chem Eng, 126, 23, 10.1016/j.jtice.2021.07.014 Kao, 2012, Low temperature synthesis of conductive silver tracks with polymer addition, J Taiwan Inst Chem Eng, 43, 965, 10.1016/j.jtice.2012.05.003 Wang, 2014, The study of light guide plate fabricated by inkjet printing technique, J Taiwan Inst Chem Eng, 45, 1049, 10.1016/j.jtice.2013.08.021 Toivakka, 2003, Numerical investigation of droplet impact spreading in spray coating of paper Oliver, 1984, I.nitial stages of ink jet drop impaction, spreading and wetting on paper, Tappi J, 67 Gao, 2018, Granule formation and structure from single drop impact on heterogeneous powder beds, Int J Pharm, 552, 56, 10.1016/j.ijpharm.2018.09.036 Fu, 2019, Numerical simulation of sessile droplet spreading and penetration on porous substrates, Langmuir, 35, 2917, 10.1021/acs.langmuir.8b03472 Tan, 2016, Three-dimensional simulation of micrometer-sized droplet impact and penetration into the powder bed, Chem Eng Sci, 153, 93, 10.1016/j.ces.2016.07.015 Reis, 2004, Numerical simulation of the impact of liquid droplets on porous surfaces, J Comput Phys, 198, 747, 10.1016/j.jcp.2004.01.024 Reis, 2008, Parametric study of liquid droplets impinging on porous surfaces, Appl Math Model, 32, 341, 10.1016/j.apm.2006.12.006 Suwanprateeb, 2006, Strength improvement of critical-sized three dimensional printing parts by infiltration of solvent-free visible light-cured resin, J Mater Sci Mater Med, 17, 1383, 10.1007/s10856-006-0614-8 Suwanprateeb, 2016, Enhancement of mechanical properties of 3D printed hydroxyapatite by combined low and high molecular weight polycaprolactone sequential infiltration, J Mater Sci Mater Med, 27, 10.1007/s10856-016-5784-4 Elliott, 2016, Infiltration of nanoparticles into porous binder jet printed parts, Am J Eng Appl Sci, 9, 128, 10.3844/ajeassp.2016.128.133 Suwanprateeb, 2006, Improvement in mechanical properties of three-dimensional printing parts made from natural polymers reinforced by acrylate resin for biomedical applications: a double infiltration approach, Polym Int, 55, 57, 10.1002/pi.1918 Murray, 2017, Two-component additive manufacturing of nanothermite structures via reactive inkjet printing, J Appl Phys, 122, 10.1063/1.4999800 Smith, 2012, Reactive inkjet printing, J Mater Chem A, 22, 10965, 10.1039/c2jm30649b Sturgess, 2017, 3D reactive inkjet printing of polydimethylsiloxane †, J Mater Chem C, 5, 9733, 10.1039/C7TC02412F Wang, 2008, Manufacture of 3-dimensional objects by reactive inkjet printing, Soft Matter, 4, 2513, 10.1039/b807758d Kröber, 2009, Reactive inkjet printing of polyurethanes, J Mater Chem, 19, 5234, 10.1039/b823135d Accardo, 2013, Fast, active droplet interaction: coalescence and reactive mixing controlled by electrowetting on a superhydrophobic surface, Lab Chip, 13, 332, 10.1039/C2LC41193H Gu, 2021, Chaotic mixing and mass transfer characteristics of fractal impellers in gas-liquid stirred tank, J Taiwan Inst Chem Eng, 121, 20, 10.1016/j.jtice.2021.03.038 Paik, 2003, Rapid droplet mixers for digital microfluidic systems, Lab Chip, 3, 253, 10.1039/B307628H Zou, 2016, CFD simulation and PIV measurement of liquid–liquid two-phase flow in pump-mix mixer, J Taiwan Inst Chem Eng, 60, 15, 10.1016/j.jtice.2015.10.007 Fu, 2018, Simulation of reactive mixing behaviors inside micro-droplets by a lattice Boltzmann method, Chem Eng Sci, 181, 79, 10.1016/j.ces.2018.02.010 Fu, 2019, Numerical simulation of liquid mixing inside soft droplets with periodic deformation by a lattice Boltzmann method, J Taiwan Inst Chem Eng, 98, 37, 10.1016/j.jtice.2018.08.025 Yeh, 2014, Chemical reaction and mixing inside a coalesced droplet after a head-on collision, Microfluid Nanofluidics, 18, 1355, 10.1007/s10404-014-1534-4 Liu, 2021, The role of drop shape in impact and splash, Nat Commun, 12, 1 Zhu, 2017, Dynamics of drop impact onto a solid sphere: spreading and retraction, J Fluid Mech, 824, R3, 10.1017/jfm.2017.388 Chen, 2017, Drop impact on spherical soft surfaces, Phys Fluids, 29, 10.1063/1.4996587 Berberović, 2009, Drop impact onto a liquid layer of finite thickness: dynamics of the cavity evolution, Phys Rev E, 79, 10.1103/PhysRevE.79.036306 Roisman, 2002, Multiple drop impact onto a dry solid substrate, J Colloid Interface Sci, 256, 396, 10.1006/jcis.2002.8683 Damak, 2018, Expansion and retraction dynamics in drop-on-drop impacts on nonwetting surfaces, Phys Rev Fluids, 3, 10.1103/PhysRevFluids.3.093602 Bird R., Stewart W., Lightfoot E. Transport Phenomena Revised 2nd Edition. 2006. Hirt, 1981, Volume of fluid (VOF) method for the dynamics of free boundaries, J Comput Phys, 39, 201, 10.1016/0021-9991(81)90145-5 VOF - What's in a Name? | CFD-101 | Volume of Fluid Method n.d. https://www.flow3d.com/resources/cfd-101/modeling-techniques/vof-whats-in-a-name (accessed October 4, 2021). Rayleigh, 1879, On the stability, or instability, of certain fluid motions, Proc Lond Math Soc, s1-11, 57, 10.1112/plms/s1-11.1.57