The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties

Hossain, 2020, Waste rice husk ash derived sol: A potential binder in high alumina refractory castables as a replacement of hydraulic binder, J. Alloy. Compd., 817, 10.1016/j.jallcom.2019.152806 Kang, 2019, The use of rice husk ash as reactive filler in ultra-high performance concrete, Cem. Concr. Res., 115, 389, 10.1016/j.cemconres.2018.09.004 Mohseni, 2019, Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nano-alumina, Constr. Build. Mater., 209, 532, 10.1016/j.conbuildmat.2019.03.067 Boontawee, 2018, Effect of Rice Husk Ash Silica as Cement Replacement for Making Construction Mortar, Key Eng. Mater., 775, 624, 10.4028/www.scientific.net/KEM.775.624 Huang, 2017, Influence of rice husk ash on strength and permeability of ultra-high performance concrete, Constr. Build. Mater., 149, 621, 10.1016/j.conbuildmat.2017.05.155 Miyandehi, 2016, Performance and properties of mortar mixed with nano-CuO and rice husk ash, Cem. Concr. Compos., 74, 225, 10.1016/j.cemconcomp.2016.10.006 Agwa, 2020, Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete, Constr. Build. Mater., 235, 10.1016/j.conbuildmat.2019.117541 Tadjarodi, 2012, Preparation and characterization of nano-porous silica aerogel from rice husk ash by drying at atmospheric pressure, Mater. Res. Bull., 47, 2584, 10.1016/j.materresbull.2012.04.143 Van Tuan, 2011, Hydration and microstructure of ultra high performance concrete incorporating rice husk ash, Cem. Concr. Res., 41, 1104, 10.1016/j.cemconres.2011.06.009 Nair, 2008, A structural investigation relating to the pozzolanic activity of rice husk ashes, Cem. Concr. Res., 38, 861, 10.1016/j.cemconres.2007.10.004 Rêgo, 2015, Microstructure of cement pastes with residual rice husk ash of low amorphous silica content, Constr. Build. Mater., 80, 56, 10.1016/j.conbuildmat.2014.12.059 Xu, 2016, Pozzolanic Reactivity of Silica Fume and Ground Rice Husk Ash as Reactive Silica in a Cementitious System: A Comparative Study, Materials (Basel), 9, 10.3390/ma9030146 Wang, 2017, Effect of Rice Husk Ash on High-Temperature Mechanical Properties and Microstructure of Concrete, Kem. Ind., 66, 157, 10.15255/KUI.2016.054 Tawfik, 2020, Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties, Journal of King Saud University-Engineering Sciences Zeyad, 2018, Workability, setting time and strength of high-strength concrete containing high volume of palm oil fuel ash. The Open Civil, Engineering Journal, 12 Zeyad, 2020, Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers, J. Mater. Res. Technol., 9, 806, 10.1016/j.jmrt.2019.11.021 Tayeh, 2018, Effects of marble, timber, and glass powder as partial replacements for cement, Journal of Civil Engineering and Construction, 7, 63, 10.32732/jcec.2018.7.2.63 Tayeh, 2020, Durability and mechanical properties of seashell partially-replaced cement, Journal of Building Engineering, 31, 10.1016/j.jobe.2020.101328 Tayeh, 2019, Effect of incorporating pottery and bottom ash as partial replacement of cement, Karbala Int. J. Mod. Sci., 5, 9, 10.33640/2405-609X.1220 Al Saffar, 2018, Influence of pottery clay in cement mortar and concrete mixture: a review. International Journal of, Eng. Technol., 7, 67 Mohammed, 2014, Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash, J. Adv. Concr. Technol., 12, 127, 10.3151/jact.12.127 Amin, 2020, Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete, J. Cleaner Prod., 273, 10.1016/j.jclepro.2020.123073 Tayeh, 2012, Mechanical properties of old concrete—UHPFC interface Gesoglu, 2016, Properties of low binder ultra-high performance cementitious composites: Comparison of nanosilica and microsilica, Constr. Build. Mater., 102, 706, 10.1016/j.conbuildmat.2015.11.020 Sobolev, 2004, The development of a new method for the proportioning of high-performance concrete mixtures, Cem. Concr. Compos., 26, 901, 10.1016/j.cemconcomp.2003.09.002 G. Xiaoyu F. Yingfang L. Haiyang The compressive behavior of cement mortar with the addition of nano metakaolin Nanomaterials and Nanotechnology 8 2018 184798041875559 Sanchez, 2010, Nanotechnology in concrete – A review, Constr. Build. Mater., 24, 2060, 10.1016/j.conbuildmat.2010.03.014 Pacheco-Torgal, 2011, Nanotechnology: Advantages and drawbacks in the field of construction and building materials, Constr. Build. Mater., 25, 582, 10.1016/j.conbuildmat.2010.07.009 Hamada, 2020, Effect of high-volume ultrafine palm oil fuel ash on the engineering and transport properties of concrete, Case Stud. Constr. Mater., 12 Hamada, 2020, Effects of nano-palm oil fuel ash and nano-eggshell powder on concrete, Constr. Build. Mater., 261, 10.1016/j.conbuildmat.2020.119790 Lee, 2007, A preliminary study of reactive powder concrete as a new repair material, Constr. Build. Mater., 21, 182, 10.1016/j.conbuildmat.2005.06.024 Fadzil, 2014, Alteration of Nano Metakaolin for Ultra High Performance Concrete., 887 Baer, 2013, Surface characterization of nanomaterials and nanoparticles: Important needs and challenging opportunities, J Vac Sci Technol A, 31, 50820, 10.1116/1.4818423 Xu, 2015, Effect of rice husk ash fineness on porosity and hydration reaction of blended cement paste, Constr. Build. Mater., 89, 90, 10.1016/j.conbuildmat.2015.04.030 Van, 2014, Rice husk ash as both pozzolanic admixture and internal curing agent in ultra-high performance concrete, Cem. Concr. Compos., 53, 270, 10.1016/j.cemconcomp.2014.07.015 Msinjili, 2017, Performance of rice husk ash blended cementitious systems with added superplasticizers, Cem. Concr. Compos., 83, 202, 10.1016/j.cemconcomp.2017.07.014 Tian, 2013, Research on Ultra-High Performance Concrete with Rice Husk Ash, Applied Mechanics and Materials, 330, 131, 10.4028/www.scientific.net/AMM.330.131 Nazari, 2011, The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete, Compos. B Eng., 42, 570, 10.1016/j.compositesb.2010.09.025 Amin, 2015, Effect of using different types of nano materials on mechanical properties of high strength concrete, Constr. Build. Mater., 80, 116, 10.1016/j.conbuildmat.2014.12.075 Laureti, 2018, Detection of rebars in concrete using advanced ultrasonic pulse compression techniques, Ultrasonics, 85, 31, 10.1016/j.ultras.2017.12.010 Schabowicz, 2014, Ultrasonic tomography – The latest nondestructive technique for testing concrete members – Description, test methodology, application example, Archives of Civil and Mechanical Engineering, 14, 295, 10.1016/j.acme.2013.10.006 Wolfs, 2018, Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete, Constr. Build. Mater., 181, 447, 10.1016/j.conbuildmat.2018.06.060 Mohseni, E., et al., Corrigendum to “Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nanoalumina” [Constr. Build. Mater. 209 (2019) 532–540]. Construction and Building Materials, 2020. 232: p. 117262 Mohseni, 2015, Durability Properties of High-Performance Concrete Incorporating Nano-TiO₂ and Fly Ash, American Journal of Engineering and Applied Sciences, 8, 519, 10.3844/ajeassp.2015.519.526 Tafraoui, 2016, Durability of the Ultra High Performances Concrete containing metakaolin, Constr. Build. Mater., 112, 980, 10.1016/j.conbuildmat.2016.02.169