Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements

ETRA, The European Tyre Recycling Association. 2016, Available at: http://www.etra-eu.org [Last accessed: 02/01/2018].

Council of the European Union, Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste. 1999.

Eldin, 1994, Measurement and prediction of the strength of rubberized concrete, Cem. Concr. Compos., 16, 287, 10.1016/0958-9465(94)90041-8

Benazzouk, 2008, Thermal conductivity of cement composites containing rubber waste particles: experimental study and modelling, Constr. Build. Mater., 22, 573, 10.1016/j.conbuildmat.2006.11.011

Mohammed, 2012, Properties of crumb rubber hollow concrete block, J. Cleaner Prod., 23, 57, 10.1016/j.jclepro.2011.10.035

Council of the European Union, Council Directive 2008/98/EC on waste (Waste Framework Directive). 2008.

Bravo, 2012, Concrete made with used tyre aggregate: durability-related performance, J. Cleaner Prod., 25, 42, 10.1016/j.jclepro.2011.11.066

Thomas, 2016, A comprehensive review on the applications of waste tire rubber in cement concrete, Renew. Sustain. Energy Rev., 54, 1323, 10.1016/j.rser.2015.10.092

Son, 2011, Strength and deformability of waste tyre rubber-filled reinforced concrete columns, Constr. Build. Mater., 25, 218, 10.1016/j.conbuildmat.2010.06.035

Youssf, 2014, An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes, Constr. Build. Mater., 53, 522, 10.1016/j.conbuildmat.2013.12.007

Raffoul, 2016, Optimisation of rubberised concrete with high rubber content: an experimental investigation, Constr. Build. Mater., 124, 391, 10.1016/j.conbuildmat.2016.07.054

Bompa, 2017, Experimental assessment and constitutive modelling of rubberised concrete materials, Constr. Build. Mater., 137, 246, 10.1016/j.conbuildmat.2017.01.086

Grinys, 2013, Fracture of concrete containing crumb rubber, J. Civil Eng. Manage., 19, 447, 10.3846/13923730.2013.782335

Liu, 2013, Mechanical and fatigue performance of rubber concrete, Constr. Build. Mater., 47, 711, 10.1016/j.conbuildmat.2013.05.055

Sukontasukkul, 2006, Properties of concrete pedestrian block mixed with crumb rubber, Constr. Build. Mater., 20, 450, 10.1016/j.conbuildmat.2005.01.040

Ling, 2010, Using recycled waste tyres in concrete paving blocks, Proc. ICE - Waste Resour. Manage., 163, 37

Issa, 2013, Utilization of recycled crumb rubber as fine aggregates in concrete mix design, Constr. Build. Mater., 42, 48, 10.1016/j.conbuildmat.2012.12.054

Güneyisi, 2016, Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel-Bulkley and modified Bingham models, Arch. Civil Mech. Eng., 16, 9, 10.1016/j.acme.2015.09.003

Flores-Medina, 2014, Static mechanical properties of waste rests of recycled rubber and high quality recycled rubber from crumbed tyres used as aggregate in dry consistency concretes, Mater. Struct., 47, 1185, 10.1617/s11527-013-0121-6

Khatib, 1999, Rubberized portland cement concrete, J. Mater. Civil Eng., 11, 206, 10.1061/(ASCE)0899-1561(1999)11:3(206)

Khaloo, 2008, Mechanical properties of concrete containing a high volume of tire–rubber particles, Waste Manage. (Oxford), 28, 2472, 10.1016/j.wasman.2008.01.015

Richardson, 2012, Freeze/thaw protection of concrete with optimum rubber crumb content, J. Cleaner Prod., 23, 96, 10.1016/j.jclepro.2011.10.013

Batayneh, 2008, Promoting the use of crumb rubber concrete in developing countries, Waste Manage. (Oxford), 28, 2171, 10.1016/j.wasman.2007.09.035

Bignozzi, 2006, Tyre rubber waste recycling in self-compacting concrete, Cem. Concr. Res., 36, 735, 10.1016/j.cemconres.2005.12.011

Ganjian, 2009, Scrap-tyre-rubber replacement for aggregate and filler in concrete, Constr. Build. Mater., 23, 1828, 10.1016/j.conbuildmat.2008.09.020

USFD, Thin wire reinforcement for concrete’. B.P. Application, Editor. 2001: UK.

Pilakoutas, 2004, Reuse of tyre steel fibres as concrete reinforcement, Proc. ICE-Eng. Sustain., 157, 131

Neocleous, 2011, Fibre-reinforced roller-compacted concrete transport pavements, Proc. ICE-Transport, 164, 97

Tlemat, 2006, Stress-strain characteristic of SFRC using recycled fibres, Mater. Struct., 39, 365, 10.1007/s11527-005-9009-4

Angelakopoulos, 2008, Steel fibre reinforced roller compacted concrete pavements, Challenges Civil Constr., 16

Aiello, 2009, Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength, Waste Manage., 29, 1960, 10.1016/j.wasman.2008.12.002

Graeff, 2012, Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres, Eng. Struct., 45, 385, 10.1016/j.engstruct.2012.06.030

Turatsinze, 2006, Positive synergy between steel-fibres and rubber aggregates: effect on the resistance of cement-based mortars to shrinkage cracking, Cem. Concr. Res., 36, 1692, 10.1016/j.cemconres.2006.02.019

Nguyen, 2010, Mechanical properties of steel fibre reinforced and rubberised cement-based mortars, Mater. Des., 31, 641, 10.1016/j.matdes.2009.05.006

Ganesan, 2013, Flexural fatigue behavior of self compacting rubberized concrete, Constr. Build. Mater., 44, 7, 10.1016/j.conbuildmat.2013.02.077

Xie, 2015, Compressive and flexural behaviours of a new steel-fibre-reinforced recycled aggregate concrete with crumb rubber, Constr. Build. Mater., 79, 263, 10.1016/j.conbuildmat.2015.01.036

Medina, 2017, Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling, Constr. Build. Mater., 144, 563, 10.1016/j.conbuildmat.2017.03.196

BSI, EN 197-1: Cement — Part 1: Composition, specifications and conformity criteria for common cements. BSI 389 Chiswick High Road, London W4 4AL, UK. 2011.

ASTM, C136, 2006

BSI, EN 1097-6: Tests for mechanical and physical properties of aggregates, Determination of particle density and water absorption. BSI 389 Chiswick High Road, London W4 4AL, UK. 2013.

BSI, EN 1097-3: Tests for mechanical and physical properties of aggregates, Determination of loose bulk density and voids. BSI 389 Chiswick High Road, London W4 4AL, UK. 1998.

BSI, EN 933-3: Tests for geometrical properties of aggregates, Determination of particle shape – Flakiness index. BSI 389 Chiswick High Road, London W4 4AL, UK. 2012.

Hu, 2018, Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibres, Constr. Build. Mater., 163, 376, 10.1016/j.conbuildmat.2017.12.116

BSI, EN 12350-2: Testing fresh concrete, Part 2: Slump-test. BSI 389 Chiswick High Road, London W4 4AL, UK. 2009.

BSI, EN 12350-7: Testing fresh concrete, Part 7: Air content — Pressure. BSI 389 Chiswick High Road, London, W4 4AL, UK. 2009.

BSI, EN 12350-6: Testing fresh concrete Part 6: Density. BSI 389 Chiswick High Road, London, W4 4AL, UK. 2009.

BSI, EN 12390-2: Testing hardened concrete, Part 2: Making and curing specimens for strength tests. BSI 389 Chiswick High Road, London W4 4AL, UK. 2009.

BSI, EN 14651:+A1:2007: Test method for metallic fibre concrete — Measuring the flexural tensile strength (limit of proportionality (LOP), residual) ICS 91.100.30. BSI 389 Chiswick High Road, London W4 4AL, UK. 2005.

BSI, EN 12390-3: Testing hardened concrete, Part3: Compressive strength of test specimens. BSI 389 Chiswick High Road, London W4 4AL, UK. 2009.

Garcia, 2015, Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps: shake table tests, Bull. Earthq. Eng., 1

JCI. SF-4, 1984

RILEM, TC 162-TDF, 2002, Test and design methods for steel fibre reinforced concrete, Bending test, Final Reccomendation, Mater. Struct., 35, 579, 10.1617/13884

BSI, EN 12617-4: Products and systems for the protection and repair of concrete structures — Test methods —Part 4: Determination of shrinkage and expansion. BSI 389 Chiswick High Road, London W4 4AL, UK. 2002.

BSI. EN 13877-1. Concrete pavements Part 1: Materials. BSI 389 Chiswick High Road London W4 4AL UK. 2013.

BSI, BS EN 206-1. Concrete —Part 1: Specification, performance,production and conformity. BSI 389 Chiswick High Road London W4 4AL. 2000.

Siddique, 2004, Properties of concrete containing scrap-tire rubber–an overview, Waste Manage. (Oxford), 24, 563, 10.1016/j.wasman.2004.01.006

Abaza, 2015, Flexural behavior of steel fiber-reinforced rubberized concrete, J. Mater. Civil Eng., 28, 04015076, 10.1061/(ASCE)MT.1943-5533.0001334

fib, Model Code for Concrete Structures 2010. Federal Institute of Technology Lausanne–EPFL, Section Génie Civil, Swizerland. 2010. p. 978-3.

Aiello, 2010, Waste tyre rubberized concrete: properties at fresh and hardened state, Waste Manag, 30, 1696, 10.1016/j.wasman.2010.02.005

BSI, EN 14889-1: Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity. BSI 389 Chiswick High Road, London W4 4AL, UK. 2006.

BSI, EN1992-1-1. Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings. BSI 389 Chiswick High Road, London W4 4AL, UK. 2004.