Physical and Chemical Explanation of the Choice of a Counterbody Material for Friction Pairs with Polymer Materials
Tóm tắt
Abstract—Experimental studies on the wear of polyether ether ketone (PEEK) on carbon steel 45 and alloyed steel 18Х2Н4МА have been carried out. It is shown that in the friction pair of PEEK—alloyed steel compared to PEEK—carbon steel creates a temperature regime that promotes the chemical interaction of polymer and nickel, which leads to a noticeable decrease in the upper limit of the range of operating loads. The paper presents the results of a comparative microscopic study of friction tracks on the polymer and on carbon and alloyed steels.
Tài liệu tham khảo
Mikhailov, Yu.A., Termostoikie polimery i polimernye materialy (Thermostable Polymers and Polymeric Materials), St. Petersburg: Professiya, 2006.
Cadman, P. and Gossedge, G.M., The chemical nature of metal-polytetrafluoroethylene tribological interactions as studied by X-ray photoelectron spectroscopy, Wear, 1979, vol. 54, pp. 224–232.
Sedakova, E.B. and Kozyrev, Yu.P., Wear mechanisms of polytetrafluoroethylene during its friction against various grades of steel, J. Mach. Manuf. Reliab., 2016, vol. 45, no. 2, pp. 163–167.
Trushin, Yu.V., Fizicheskoe materialovedenie (Physical Material Science), St. Petersburg: Nauka, 2000.
Sedakova, E.B. and Kozyrev, Yu.P., Transfer films in a PTFE–steel pair at different temperatures, Russ. Eng. Res., 2017, vol. 37, no. 10, pp. 863–865.
Sedakova, E.B. and Kozyrev, Yu.P., Polymer thermal loading in the polytetrafluoroethylene–steel friction pair, J. Frict. Wear, 2017, vol. 38, no. 5, pp. 390–394.
Dul’nev, G.N. and Semyashin, E.M., Teploobmen v elektronnykh apparatakh (Heat Exchange in Electronic Devices), Leningrad: Energiya, 1968.