Corrosion and passivation of magnesium alloys

Atrens, 2011, Corrosion of magnesium (Mg) alloys and metallurgical influence, 117 Atrens, 2015, Review of recent developments in the field of magnesium corrosion, Adv. Eng. Mater., 17, 400, 10.1002/adem.201400434 Song, 2003, Understanding magnesium corrosion—a framework for improved alloy performance, Adv. Eng. Mater., 5, 837, 10.1002/adem.200310405 Song, 2007, Recent insights into the mechanism of magnesium corrosion and research suggestions, Adv. Eng. Mater., 9, 177, 10.1002/adem.200600221 Abbott, 2015, Magnesium: industrial and research developments over the last 15 years, Corrosion, 71, 120, 10.5006/1474 Ambat, 2000, Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy, Corros. Sci., 42, 1433, 10.1016/S0010-938X(99)00143-2 El-Moneim, 2011, Corrosion behaviour of sputter-deposited Mg–Zr alloys in a borate buffer solution, Corros. Sci., 53, 2988, 10.1016/j.corsci.2011.05.043 Esmaily, 2016, A ToF-SIMS investigation of the corrosion behavior of Mg alloy AM50 in atmospheric environments, Appl. Surf. Sci., 360, 98, 10.1016/j.apsusc.2015.11.002 Gu, 2012, In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal, Acta Biomater., 8, 2360, 10.1016/j.actbio.2012.02.018 Kirkland, 2012, Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations, Acta Biomater., 8, 925, 10.1016/j.actbio.2011.11.014 Cho, 2008, Magnesium technology and manufacturing for ultra lightweight armored ground vehicles Atrens, 2007, The negative difference effect and unipositive Mg+, Adv. Eng. Mater., 9, 292, 10.1002/adem.200600275 Atrens, 2011, Corrosion mechanism applicable to biodegradable magnesium implants, Mater. Sci. Eng. B, 176, 1609, 10.1016/j.mseb.2010.12.017 Atrens, 2013, Advances in Mg corrosion and research suggestions, J. Magnes. Alloys, 1, 177, 10.1016/j.jma.2013.09.003 Cao, 2013, Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn Sn, Ca, Zn, Al, Zr, Si, Sr, Corros. Sci., 76, 60, 10.1016/j.corsci.2013.06.030 Song, 2015, The anodic surface film and hydrogen evolution on Mg, Corros. Sci., 98, 758, 10.1016/j.corsci.2015.05.047 Li, 2014, Effect of bicarbonate on biodegradation behaviour of pure magnesium in a simulated body fluid, Electrochim. Acta, 115, 56, 10.1016/j.electacta.2013.10.131 Song, 2005, Recent progress in corrosion and protection of magnesium alloys, Adv. Eng. Mater., 7, 563, 10.1002/adem.200500013 Arrabal, 2012, Corrosion behaviour of AZ91D and AM50 magnesium alloys with Nd and Gd additions in humid environments, Corros. Sci., 55, 351, 10.1016/j.corsci.2011.10.038 Arrabal, 2015, Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ91, Corros. Sci., 97, 38, 10.1016/j.corsci.2015.04.004 Chang, 2008, Investigation of the corrosion for Mg–xGd–3Y–0.4Zr (x=6 8, 10, 12wt%) alloys in a peak-aged condition, Corros. Sci., 50, 166, 10.1016/j.corsci.2007.06.003 Shi, 2013, Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE=Ce La, Nd, Y, Gd, Corros. Sci., 76, 98, 10.1016/j.corsci.2013.06.032 Song, 2009, Effect of tin modification on corrosion of AM70 magnesium alloy, Corros. Sci., 51, 2063, 10.1016/j.corsci.2009.05.031 Arrabal, 2008, Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings, Corros. Sci., 50, 1744, 10.1016/j.corsci.2008.03.002 Arrabal, 2010, Al/SiC thermal spray coatings for corrosion protection of Mg-Al alloys in humid and saline environments, Surf. Coat. Technol., 204, 2767, 10.1016/j.surfcoat.2010.02.030 Hu, 2012, Recent progress in corrosion protection of magnesium alloys by organic coatings, Prog. Org. Coat., 73, 129, 10.1016/j.porgcoat.2011.10.011 Lim, 2012, Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation, Corros. Sci., 62, 104, 10.1016/j.corsci.2012.04.043 Wang, 2012, Direct electroless nickel–boron plating on AZ91D magnesium alloy, Surf. Coat. Technol., 206, 3676, 10.1016/j.surfcoat.2012.03.020 Pu, 2012, Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy, Corros. Sci., 57, 192, 10.1016/j.corsci.2011.12.018 Chen, 2012, An investigation of new barium phosphate chemical conversion coating on AZ31 magnesium alloy, Surf. Coat. Technol., 210, 156, 10.1016/j.surfcoat.2012.09.009 Song, 2014, The possibility of forming a sacrificial anode coating for Mg, Corros. Sci., 87, 11, 10.1016/j.corsci.2014.07.007 Song, 2014, Corrosion mechanism and evaluation of anodized magnesium alloys, Corros. Sci., 85, 126, 10.1016/j.corsci.2014.04.008 Song, 2012, The effect of surface pretreatment on the corrosion performance of Electroless E-coating coated AZ31, Corros. Sci., 62, 61, 10.1016/j.corsci.2012.04.045 Song, 2011, A dipping E-coating for Mg alloys, Prog. Org. Coat., 70, 252, 10.1016/j.porgcoat.2010.09.028 Ardelean, 2009, Corrosion protection of AZ91 magnesium alloy by anodizing in niobium and zirconium-containing electrolytes, Corros. Sci., 51, 3030, 10.1016/j.corsci.2009.08.030 Ardelean, 2008, Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings, Corros. Sci., 50, 1907, 10.1016/j.corsci.2008.03.015 Ardelean, 2001, Enhanced corrosion resistance of magnesium and its alloys through the formation of cerium (and aluminium) oxide surface films, Mater. Corros., 52, 889, 10.1002/1521-4176(200112)52:12<889::AID-MACO889>3.0.CO;2-0 Song, 1999, Corrosion mechanisms of magnesium alloys, Adv. Eng. Mater., 1, 11, 10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N Song, 2011, Concluding remarks − corrosion of magnesium alloys, 615 Song, 2016, The corrosion and passivity of sputtered Mg–Ti alloys, Corros. Sci., 104, 36, 10.1016/j.corsci.2015.11.028 Samaniego, 2014, Exploring the possibility of protective surface oxides upon Mg alloy AZ31 via lutetium additions, Corros. Sci., 89, 101, 10.1016/j.corsci.2014.08.015 Cao, 2013, Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2, Corros. Sci., 75, 78, 10.1016/j.corsci.2013.05.018 Qiao, 2012, Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting, Corros. Sci., 61, 185, 10.1016/j.corsci.2012.04.030 Shi, 2011, An innovative specimen configuration for the study of Mg corrosion, Corros. Sci., 53, 226, 10.1016/j.corsci.2010.09.016 Zhao, 2008, Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91, Corros. Sci., 50, 1939, 10.1016/j.corsci.2008.04.010 Liu, 2009, Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys, Corros. Sci., 51, 602, 10.1016/j.corsci.2008.12.015 Zainal Abidin, 2011, Corrosion of high purity Mg, Mg2Zn0.2Mn ZE41 and AZ91 in hank’s solution at 37°C, Corros. Sci., 53, 3542, 10.1016/j.corsci.2011.06.030 Williams, 2007, Localized corrosion of magnesium in chloride containing electrolyte studied by a scanning vibrating electrode technique, ECS Trans., 3, 389, 10.1149/1.2789244 Liu, 2008, The effect of crystallographic orientation on the active corrosion of pure magnesium, Scr. Mater., 58, 421, 10.1016/j.scriptamat.2007.10.027 Song, 2012, The effect of texture on the corrosion behavior of AZ31 Mg alloy, JOM, 64, 671, 10.1007/s11837-012-0341-1 Song, 2010, Crystallographic orientation and electrochemical activity of AZ31 Mg alloy, Electrochem. Commun., 12, 1009, 10.1016/j.elecom.2010.05.011 Song, 2012, Crystal orientation and electrochemical corrosion of polycrystalline Mg, Corros. Sci., 63, 100, 10.1016/j.corsci.2012.05.019 Cao, 2015, Influence of casting porosity on the corrosion behaviour of Mg0.1Si, Corros. Sci., 94, 255, 10.1016/j.corsci.2015.02.002 Gnedenkov, 2013, Features of the corrosion processes development at the magnesium alloys surface, Surf. Coat. Technol., 225, 112, 10.1016/j.surfcoat.2013.03.023 Karavai, 2010, Localized electrochemical study of corrosion inhibition in microdefects on coated AZ31 magnesium alloy, Electrochim. Acta, 55, 5401, 10.1016/j.electacta.2010.04.064 Williams, 2013, The localised corrosion of Mg alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique, Electrochim. Acta, 109, 489, 10.1016/j.electacta.2013.07.134 Williams, 2010, Inhibition of magnesium localised corrosion in chloride containing electrolyte, Electrochim. Acta, 55, 7824, 10.1016/j.electacta.2010.03.023 Williams, 2012, Localized corrosion of binary Mg-Nd alloys in chloride-containing electrolyte using a scanning vibrating electrode technique, Corrosion, 68, 489, 10.5006/i0010-9312-68-6-489 Song, 1997, The anodic dissolution of magnesium in chloride and sulphate solutions, Corros. Sci., 39, 1981, 10.1016/S0010-938X(97)00090-5 Liu, 2009, A first quantitative XPS study of the surface films formed, by exposure to water, on Mg and on the Mg–Al intermetallics: al3Mg2 and Mg17Al12, Corros. Sci., 51, 1115, 10.1016/j.corsci.2009.02.017 Brady, 2014, Tracer film growth study of hydrogen and oxygen from the corrosion of magnesium in water, J. Electrochem. Soc., 161, C395, 10.1149/2.0821409jes Unocic, 2014, Transmission electron microscopy study of aqueous film formation and evolution on magnesium alloys, J. Electrochem. Soc., 161, C302, 10.1149/2.024406jes Ardelean, 2013, Corrosion processes of Mg–Y–Nd–Zr alloys in Na2SO4 electrolyte, Corros. Sci., 73, 196, 10.1016/j.corsci.2013.03.036 Zhao, 2008, Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41, Corros. Sci., 50, 3168, 10.1016/j.corsci.2008.08.023 Perrault, 1974, The potential-pH diagram of the magnesium-water system: j, Electroanal. Chem. Interfacial Electrochem., 51, 107, 10.1016/S0022-0728(74)80298-6 Song, 2010, Corrosion behaviour of magnesium alloys and protection techniques, 3 Bruesch, 1985, Corrosion of stainless steels in chloride solution − An XPS investigation of passive films, Appl. Phys. A, 38, 1, 10.1007/BF00618720 Burstein, 2009, The remarkable passivity of austenitic stainless steel in sulphuric acid solution and the effect of repetitive temperature cycling, Corros. Sci., 51, 2249, 10.1016/j.corsci.2009.07.010 Jin, 1987, ESCA − Studies of the structure and composition of the passive film formed on stainless steels by various immersion times in 0.1M NaCl solution, Appl. Phys. A, 42, 149, 10.1007/BF00616726 Jin, 1988, ESCA − Studies of the surface film formed on stainless steel by exposure to 0.1M NaCl solution at various controlled potentials, Appl. Phys. A, 46, 51, 10.1007/BF00615137 Song, 2005, Transpassivation of Fe–Cr–Ni stainless steels, Corros. Sci., 47, 1953, 10.1016/j.corsci.2004.09.007 Song, 2005, A study on transition of iron from active into passive state, Corros. Sci., 47, 323, 10.1016/j.corsci.2004.05.027 Song, 1993, Effects of AC-modulated passivation and post-treatment on composition and stability of passive films, Corrosion, 49, 271, 10.5006/1.3316049 Song, 1994, The effects of AV modulated passivation on the passive film of 1Cr18Ni9Ti stainless steel, Br. Corros. J., 29, 128, 10.1179/000705994798267791 Song, 1994, The stability of the transpassive film on 304 stainless steel with post-treatment, Corros. Sci., 36, 165, 10.1016/0010-938X(94)90117-1 Blair, 2005, vol. 13B, 78 Stojilovic, 2005, Surface chemistry of zirconium, Prog. Surf. Sci., 78, 101, 10.1016/j.progsurf.2005.07.001 G.-L. Song, Environment-friendly, non-toxic and corrosion resistant magnesium anodisation, #2001904949 (Australia) (2004). Winzer, 2008, Fractography of stress corrosion cracking of Mg-Al alloys, Metall. Mater. Trans. A, 39A, 1157, 10.1007/s11661-008-9475-8 1993 Rosalbino, 2005, Effect of erbium addition on the corrosion behaviour of Mg–Al alloys, Intermetallics, 13, 55, 10.1016/j.intermet.2004.05.007 Rosalbino, 2006, Electrochemical behaviour assessment of novel Mg-rich Mg–Al–RE alloys (RE=Ce, Er), Intermetallics, 14, 1487, 10.1016/j.intermet.2006.01.056 Takenaka, 2007, Improvement of corrosion resistance of magnesium metal by rare earth elements, Electrochim. Acta, 53, 117, 10.1016/j.electacta.2007.03.027 Prasad, 2012, Production of high purity magnesium alloys by melt purification with Zr, Adv. Eng. Mater., 14, 477, 10.1002/adem.201200054 Emley, 1966 Liu, 2013, Impurity control and corrosion resistance of magnesium–aluminum alloy, Corros. Sci., 77, 143, 10.1016/j.corsci.2013.07.037 Fairman, 1971, Transgranular SCC in Mg-Al alloys, Corros. Sci., 11, 533, 10.1016/S0010-938X(71)80020-3 Velikokhatnyi, 2010, First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium- zinc-, aluminum-, yttrium- and iron-doped magnesium alloys, Acta Biomater., 6, 1698, 10.1016/j.actbio.2009.08.016 Neubert, 2007, Thermal stability and corrosion behaviour of Mg–Y–Nd and Mg–Tb–Nd alloys, Mater. Sci. Eng. A, 462, 329, 10.1016/j.msea.2005.11.077 Mengucci, 2008, Structure evolution of a WE43 Mg alloy submitted to different thermal treatments, Mater. Sci. Eng. A, 479, 37, 10.1016/j.msea.2007.06.016 Ben-Hamu, 2007, The relation between microstructure and corrosion behavior of Mg–Y–RE–Zr alloys, J. Alloys Compd., 431, 269, 10.1016/j.jallcom.2006.05.075 Zhu, 2010, The relationship between microstructure and creep resistance in die-cast magnesium–rare earth alloys, Scr. Mater., 63, 698, 10.1016/j.scriptamat.2010.02.005 Sanchez, 1996, Elevated temperature behaviour of rapidly solidified magnesium alloys containing rare earths, Mater. Sci. Eng. A, 221, 48, 10.1016/S0921-5093(96)10469-X Liu, 2010, The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys, Corros. Sci., 52, 3687, 10.1016/j.corsci.2010.07.019 Chang, 2007, Relationship between heat treatment and corrosion behaviour of Mg-3.0%Nd-0.4%Zr magnesium alloy, Trans. Nonferrous Met. Soc. China, 17, 1152, 10.1016/S1003-6326(07)60241-6 Song, 2002, The effect of zirconium grain refinement on the corrosion behaviour of magnesium-rare earth alloy MEZ, J. Light Met., 2, 1, 10.1016/S1471-5317(02)00008-1 Kaya, 2006, Corrosion and oxidation of alloys of the Mg-Y-Zr-REM system, Met. Sci. Heat Treat., 48, 518, 10.1007/s11041-006-0129-4 Neil, 2009, Corrosion of magnesium alloy ZE41–The role of microstructural features, Corros. Sci., 51, 387, 10.1016/j.corsci.2008.11.005 Hagihara, 2016, Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions, Corros. Sci., 10.1016/j.corsci.2016.03.019 Birbilis, 2013, Poisoning the corrosion of magnesium, Electrochem. Commun., 34, 295, 10.1016/j.elecom.2013.07.021 Coy, 2010, Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion, Corros. Sci., 52, 3896, 10.1016/j.corsci.2010.08.006 Hofstetter, 2014, High-strength low-alloy (HSLA) Mg-Zn-Ca alloys with excellent biodegradation performance, JOM, 66, 566, 10.1007/s11837-014-0875-5 Abu Leil, 2009, Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusion, Trans. Nonferrous Met. Soc. China, 19, 40, 10.1016/S1003-6326(08)60225-3 Arrabal, 2012, Effect of Nd on the corrosion behaviour of AM50 and AZ91D magnesium alloys in 3.5wt.% NaCl solution, Corros. Sci., 55, 301, 10.1016/j.corsci.2011.10.033 Blawert, 2010, Magnesium secondary alloys: alloy design for magnesium alloys with improved tolerance limits against impurities, Corros. Sci., 52, 2452, 10.1016/j.corsci.2010.03.035 Budruk Abhijeet, 2008, Corrosion behaviour of Mg–Cu and Mg–Mo composites in 3.5% NaCl, Corros. Sci., 50, 2423, 10.1016/j.corsci.2008.06.043 Kubásek, 2013, Structure mechanical properties, corrosion behavior and cytotoxicity of biodegradable Mg–X (X=Sn, Ga, In) alloys, Mater. Sci. Eng. C, 33, 2421, 10.1016/j.msec.2013.02.005 Liu, 2011, Influences of the quantity of Mg2Sn phase on the corrosion behavior of Mg–7Sn magnesium alloy, Electrochim. Acta, 56, 2582, 10.1016/j.electacta.2010.12.030 Liu, 2010, Effects of heat treatment on corrosion behaviors of Mg-3Zn magnesium alloy, Trans. Nonferrous Met. Soc. China, 20, 1345, 10.1016/S1003-6326(09)60302-2 Song, 2012, The role of second phases in the corrosion behavior of Mg–5Zn alloy, Corros. Sci., 60, 238, 10.1016/j.corsci.2012.03.030 Zhou, 2009, Effect of antimony, bismuth and calcium addition on corrosion and electrochemical behaviour of AZ91 magnesium alloy, Corros. Sci., 51, 403, 10.1016/j.corsci.2008.11.006 Song, 2013, Corrosion behavior and prevention strategies for magnesium (Mg) alloys, 3 Song, 2007, Control of biodegradation of biocompatable magnesium alloys, Corros. Sci., 49, 1696, 10.1016/j.corsci.2007.01.001 Song, 2011, The topography of magnetron sputter-deposited Mg–Ti alloy thin films, Mater. Chem. Phys., 125, 548, 10.1016/j.matchemphys.2010.10.018 Aung, 2002, Effect of heat treatment on corrosion and electrochemical behaviour of AZ91D magnesium alloy, J. Appl. Electrochem., 32, 1397, 10.1023/A:1022698916817 Liu, 2007, Influence of heat treatment on degradation behavior of bio-degradable die-cast AZ63 magnesium alloy in simulated body fluid, Mater. Sci. Eng. A, 456, 350, 10.1016/j.msea.2006.12.020 Zhao, 2008, Influence of homogenization annealing of AZ91 on mechanical properties and corrosion behavior, Adv. Eng. Mater., 10, 93, 10.1002/adem.200700234 Zhou, 2010, Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid, Corros. Sci., 52, 1035, 10.1016/j.corsci.2009.11.030 Song, 2004, Corrosion resistance of aged die cast magnesium alloy AZ91D, Mater. Sci. Eng. A, 366, 74, 10.1016/j.msea.2003.08.060 Neil, 2011, Corrosion of heat treated magnesium alloy ZE41, Corros. Sci., 53, 3299, 10.1016/j.corsci.2011.06.005 Song, 1999, Influence of microstructure on the corrosion of diecast AZ91D, Corros. Sci., 41, 249, 10.1016/S0010-938X(98)00121-8 Gu, 2009, In vitro corrosion and biocompatibility of binary magnesium alloys, Biomaterials, 30, 484, 10.1016/j.biomaterials.2008.10.021 Wang, 2007, The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31, Adv. Eng. Mater., 9, 967, 10.1002/adem.200700200 Cao, 2015, Influence of hot rolling on the corrosion behavior of several Mg–X alloys, Corros. Sci., 90, 176, 10.1016/j.corsci.2014.10.012 Song, 2010, The surface, microstructure and corrosion of magnesium alloy AZ31 sheet, Electrochim. Acta, 55, 4148, 10.1016/j.electacta.2010.02.068 Wang, 2008, Bio-corrosion of a magnesium alloy with different processing histories, Mater. Lett., 62, 2476, 10.1016/j.matlet.2007.12.052 Alvarez-Lopez, 2010, Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids, Acta Biomater., 6, 1763, 10.1016/j.actbio.2009.04.041 Birbilis, 2010, Grain character influences on corrosion of ECAPed pure magnesium, Corros. Eng. Sci. Technol., 45, 224, 10.1179/147842209X12559428167805 Argade, 2012, Corrosion behavior of a friction stir processed rare-earth added magnesium alloy, Corros. Sci., 58, 321, 10.1016/j.corsci.2012.01.007 Ralston, 2010, Revealing the relationship between grain size and corrosion rate of metals, Scr. Mater., 63, 1201, 10.1016/j.scriptamat.2010.08.035 Pu, 2011, Ultrafine-grained surface layer on Mg–Al–Zn alloy produced by cryogenic burnishing for enhanced corrosion resistance, Scr. Mater., 65, 520, 10.1016/j.scriptamat.2011.06.013 Song, 2010, Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution, Corros. Sci., 52, 481, 10.1016/j.corsci.2009.10.004 Song, 2011, Corrosion behaviour of bulk ultra-fine grained AZ91D magnesium alloy fabricated by equal-channel angular pressing, Corros. Sci., 53, 362, 10.1016/j.corsci.2010.09.044 Aung, 2010, Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy, Corros. Sci., 52, 589, 10.1016/j.corsci.2009.10.018 Song, 2012, Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution, Corros. Sci., 54, 97, 10.1016/j.corsci.2011.09.005 Brady, 2015, Film breakdown and nano-porous Mg(OH)(2) formation from corrosion of magnesium alloys in salt solutions, J. Electrochem. Soc., 162, C140, 10.1149/2.0171504jes Garcés, 2001, Precipitation hardening of Mg–12%Ti (wt.%) synthetised by physical vapour deposition, Scr. Mater., 45, 1001, 10.1016/S1359-6462(01)01095-8 Schlüter, 2014, Corrosion performance and mechanical properties of sputter-deposited MgY and MgGd alloys, Corros. Sci., 78, 43, 10.1016/j.corsci.2013.08.027 Yao, 2003, Corrosion behavior of melt-spun Mg65Ni20Nd15 and Mg65Cu25Y10 metallic glasses, Electrochim. Acta, 48, 2641, 10.1016/S0013-4686(03)00310-4 Xu, 2011, Corrosion performance of Mg-Ti alloys synthesized by magnetron sputtering, 611 Hanawalt, 1942, Corrosion studies of magnesium and its alloys, Trans. AIME, 147, 273 Taheri, 2012, Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM–EDS, Corros. Sci., 59, 222, 10.1016/j.corsci.2012.03.001 Kish, 2012, Technical note: examination of focused ion beam-sectioned surface films formed on AM60B Mg alloy in an aqueous saline solution, Corrosion, 68, 468, 10.5006/i0010-9312-68-6-468 Baril, 2001, The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions, Corros. Sci., 43, 471, 10.1016/S0010-938X(00)00095-0 Yao, 2000, An XPS investigation of the oxidation/corrosion of melt-spun Mg, Appl. Surf. Sci., 158, 112, 10.1016/S0169-4332(99)00593-0 Kwak, 2011, Cationic doping of MgO surfaces to build corrosion protection in Mg alloys, J. Alloys Compd., 509, 8189, 10.1016/j.jallcom.2011.04.125 Peng, 1990, Characterization of oxide layers on Mg(0001) and comparison of H2O adsorption on surface and bulk oxides, Surf. Sci., 233, 283, 10.1016/0039-6028(90)90641-K Song, 1998, Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride, Corros. Sci., 40, 1769, 10.1016/S0010-938X(98)00078-X