Fundamentals and advances in magnesium alloy corrosion

Tokarska, 2016, The climate response to five trillion tonnes ofcarbon, Nat Clim Chang, 6, 851, 10.1038/nclimate3036 Fyfe, 2016, Making sense of the early-2000s warming slowdown, Nat Clim Chang, 6, 224, 10.1038/nclimate2938 Meinshausen, 2009, Greenhouse-gas emission targets for limiting global warming to 2°C, Nature, 458, 1158, 10.1038/nature08017 EP. Regulation (EC) no 443/2009 setting emission performance standards for new passenger cars as part of the Community’s integrated approach to reduce CO2 emissions from light-duty vehicles. Off J Eur Communities; 2009. p. 15. Can be found in <https://ec.europa.eu/clima/consultations/articles/0030_en.htm>. Kainer, 2003 Global climate change impacts in the United States, annual report; 2009. Abbott, 2015, Mg: Industrial and research developments over the last 15 years, Corrosion, 71, 120, 10.5006/1474 International Air Transport Association. Guidance Material and Best Practices for Fuel and Environmental Management, 1st ed. Montreal (Geneva); 2004. Zenkert, 2010 Avedesian, 1999 Kainer KU. Magnesium alloys and their applications; 2006. Mordike, 2001, Magnesium properties - applications - potential, Mater Sci Eng A, 302, 37, 10.1016/S0921-5093(00)01351-4 Birbilis, 2009, On the corrosion of binary magnesium-rare earth alloys, Corros Sci, 51, 683, 10.1016/j.corsci.2008.12.012 Kammer, 2000 Polmear, 2006 Bussy, 1830, Mémoire Sur le radical métallique de la magnésie, J de Chimie Médic, de Pharma, et de Toxicologie, 6, 141 Beetz, 1866, On the development of hydrogen from the anode, Phil Mag, 32, 269, 10.1080/14786446608644179 Huse, 1878, A new ligature?, Chicago Med J Exam, 172, 2 Lambotte, 1909, Technique et indications de la prothèse perdue dans la traitement des fractures, Presse Med Belge, 17, 321 Boyer, 1927 McNulty, 1942, Some corrosion characteristics of high purity magnesium alloys, Trans Electrochem Soc, 81, 423, 10.1149/1.3071389 Petty, 1954, The anodic oxidation of magnesium metal: evidence for the existence of unipositive Mg, J Am Chem Soc, 76, 363, 10.1021/ja01631a013 Splinter, 1993, An AES and XPS study of the initial oxidation of polycrystalline magnesium with water vapour at room temperature, Surf Sci, 292, 130, 10.1016/0039-6028(93)90396-2 Nordlien, 1995, Morphology and structure of oxide films formed on magnesium by exposure to air and water, J Electrochem Soc, 142, 3320, 10.1149/1.2049981 Nordlien, 1996, Morphology and structure of oxide films formed on MgAl alloys by exposure to air and water, J Electrochem Soc, 143, 2564, 10.1149/1.1837048 Nordlien, 1997, Morphology and structure of water-formed oxides on ternary MgAl alloys, J Electrochem Soc, 144, 461, 10.1149/1.1837432 Can be found in <http://www.Mg-elektron.com/Mg-elektron-welcomes-new-standard-use-Mg-commercial-aircraft-seats>. Blawert, 2004, Automotive applications of magnesium and its alloys, Trans Indian Inst Met, 57, 397 Brooks E. Magnesium base alloys. US Patent 1957934 A; 1934. Vermilyea, 1969, Studies of inhibition of magnesium corrosion, J Electrochem Soc, 116, 1487, 10.1149/1.2411579 Lindström, 2002, The influence of carbon dioxide on the atmospheric corrosion of some magnesium alloys in the presence of NaCl, J Electrochem Soc, 149, B103, 10.1149/1.1452115 Williams, 2008, Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique, J Electrochem Soc, 155, 10.1149/1.2918900 Williams, 2013, The source of hydrogen evolved from a magnesium anode, Electrochem Commun, 36, 1, 10.1016/j.elecom.2013.08.023 Xu, 2015, A high-specific-strength and corrosion-resistant magnesium alloy, Nat Mater, 14, 1229, 10.1038/nmat4435 Esmaily, 2014, Microstructural characterization of the Mg-Al alloy AM50 produced by a newly developed rheo-casting process, Mater Charact, 95, 50, 10.1016/j.matchar.2014.06.001 Schumann, 2006, Engineering requirements, strategies and examples Du, 2007, Reassessment of the Al-Mn system and a thermodynamic description of the Al-Mg-Mn system, Int J Mater Res, 98, 855, 10.3139/146.101547 Liu, 2015, The interface bonding mechanism and related mechanical properties of Mg/Al compound materials fabricated by insert molding, Mater Sci Eng A, 635, 70, 10.1016/j.msea.2015.03.074 Thomas, 2015, Corrosion mechanism and hydrogen evolution on Mg, Curr Opin Solid State Mater Sci, 19, 85, 10.1016/j.cossms.2014.09.005 Atrens, 2015, Review of recent developments in the field of magnesium corrosion, Adva Eng Mater, 17, 400, 10.1002/adem.201400434 Gusieva, 2015, Corrosion of magnesium alloys: the role of alloying, Int Mater Rev, 60, 169, 10.1179/1743280414Y.0000000046 Kirkland, 2012, Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations, Acta Biomater, 8, 925, 10.1016/j.actbio.2011.11.014 Agarwal, 2016, Biodegradable magnesium alloys for orthopaedic applications: a review on corrosion, biocompatibility and surface modifications, Mater Sci Eng C, 68, 948, 10.1016/j.msec.2016.06.020 Winzer, 2005, A critical review of the stress corrosion cracking (SCC) of magnesium alloys, Adv Eng Mater, 7, 659, 10.1002/adem.200500071 Winzer, 2007, Stress corrosion cracking in magnesium alloys: characterization and prevention, J Mater Sci, 59, 49 Dauphin-Ducharme, 2015, Surface analytical methods applied to magnesium corrosion, Anal Chem, 87, 7499, 10.1021/ac504576g Lebouil, 2014, A novel approach to on-line measurement of gas evolution kinetics: application to the negative difference effect of magnesium in chloride solution, Electrochim Acta, 124, 176, 10.1016/j.electacta.2013.07.131 Curioni, 2014, The behaviour of magnesium during free corrosion and potentiodynamic polarization investigated by real-time hydrogen measurement and optical imaging, Electrochim Acta, 120, 284, 10.1016/j.electacta.2013.12.109 Fajardo, 2015, Gravimetric method for hydrogen evolution measurements on dissolving magnesium, J Electrochem Soc, 162, C693, 10.1149/2.0241514jes Bland, 2015, Assessing the corrosion of commercially pure magnesium and commercial AZ31B by electrochemical impedance, mass-loss, hydrogen collection, and inductively coupled plasma optical emission spectrometry solution analysis, Corrosion, 71, 128, 10.5006/1419 Curioni, 2015, Correlation between electrochemical impedance measurements and corrosion rate of magnesium investigated by real-time hydrogen measurement and optical imaging, Electrochim Acta, 166, 372, 10.1016/j.electacta.2015.03.050 Frankel, 2014, Electrochemical techniques in corrosion: status, limitations, and needs, J Test Eval, 42, 517, 10.1520/JTE20140289 King, 2014, Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study, Electrochim Acta, 121, 394, 10.1016/j.electacta.2013.12.124 Stern, 1957, A theoretical analysis of the shape of polarization curves, J Electrochem Soc, 104, 56, 10.1149/1.2428496 Fajardo, 2015, Effect of impurities on the enhanced catalytic activity for hydrogen evolution in high purity magnesium, Electrochim Acta, 165, 255, 10.1016/j.electacta.2015.03.021 Elsentriecy, 2008, Effects of pH and temperature on the deposition properties of stannate chemical conversion coatings formed by the potentiostatic technique on AZ91D magnesium alloy, Electrochim Acta, 53, 4267, 10.1016/j.electacta.2008.01.009 Elsentriecy, 2007, Improvement in stannate chemical conversion coatings on AZ91D magnesium alloy using the potentiostatic technique, Electrochim Acta, 53, 1006, 10.1016/j.electacta.2007.08.015 Cain, 2015, Evidence of the enrichment of transition metal elements on corroding magnesium surfaces using rutherford backscattering spectrometry, J Electrochem Soc, 162, C228, 10.1149/2.0541506jes Birbilis, 2014, Evidence for enhanced catalytic activity of magnesium arising from anodic dissolution, Electrochim Acta, 132, 277, 10.1016/j.electacta.2014.03.133 Fajardo, 2016, The source of anodic hydrogen evolution on ultra high purity Mg, Electrochim Acta, 212, 510, 10.1016/j.electacta.2016.07.018 Frankel, 2013, Evolution of hydrogen at dissolving magnesium surfaces, Corros Sci, 70, 104, 10.1016/j.corsci.2013.01.017 Samaniego, 2015, Hydrogen evolution during anodic polarization of magnesium alloyed with Li, Ca, or Fe, Corrosion, 71, 224, 10.5006/1367 Scully, 2000, Polarization resistance method for determination of instantaneous corrosion rates, Corrosion, 56, 199, 10.5006/1.3280536 Shkirskiy, 2015, Revisiting the electrochemical impedance spectroscopy of magnesium with online inductively coupled plasma atomic emission spectroscopy, Chem Phys Chem, 16, 536, 10.1002/cphc.201402666 Isaacs, 1991, The effect of height on the current distribution measured with a vibrating electrode probe, J Electrochem Soc, 138, 722, 10.1149/1.2085665 McMurray, 2003, Artifacts induced by large-amplitude probe vibrations in localized corrosion measured by SVET, J Electrochem Soc, 150, B567, 10.1149/1.1623494 Williams, 2013, The localised corrosion of magnesium alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique, Electrochim Acta, 109, 489, 10.1016/j.electacta.2013.07.134 Thomas, 2015, Possibilities and limitations of scanning electrochemical microscopy of Mg and Mg alloys, Corrosion, 71, 171, 10.5006/1483 Jamali, 2015, Evaluating the corrosion behaviour of magnesium alloy in simulated biological fluid by using SECM to detect hydrogen evolution, Electrochim Acta, 152, 294, 10.1016/j.electacta.2014.11.012 Liu, 2014, Localized corrosion of magnesium alloys in NaCl solutions explored by scanning electrochemical microscopy in feedback mode, Electrochim Acta, 132, 377, 10.1016/j.electacta.2014.04.044 Salleh, 2015, Enhanced hydrogen evolution on Mg(OH)2 covered magnesium surfaces, Electrochim Acta, 161, 144, 10.1016/j.electacta.2015.02.079 Tefashe, 2014, Local flux of hydrogen from magnesium alloy corrosion investigated by scanning electrochemical microscopy, J Electroanal Chem, 720–721, 121, 10.1016/j.jelechem.2014.03.002 Dauphin-Ducharme, 2014, Local hydrogen fluxes correlated to microstructural features of a corroding sand cast AM50 magnesium alloy, J Electrochem Soc, 161, C557, 10.1149/2.0571412jes Thomas, 2016, On the effect of Fe concentration on magnesium dissolution and activation studied using atomic emission spectroelectrochemistry and scanning electrochemical microscopy, Electrochim Acta, 210, 271, 10.1016/j.electacta.2016.05.164 Ogle, 2000, Anodic dissolution of 304 stainless steel using atomic emission spectroelectrochemistry, J Electrochem Soc, 147, 1770, 10.1149/1.1393433 Ogle, 2009, Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel, Electrochim Acta, 54, 5163, 10.1016/j.electacta.2009.01.037 Ogle, 2010, Atomic emission spectroelectrochemistry applied to dealloying phenomena II. Selective dissolution of iron and chromium during active-passive cycles of an austenitic stainless steel, Electrochim Acta, 55, 913, 10.1016/j.electacta.2009.08.028 Jiang, 2011, Dissolution and passive film formation of Sn and Sn coated steel using atomic emission spectroelectrochemistry, Electrochim Acta, 58, 322, 10.1016/j.electacta.2011.09.046 Shkirskiy, 2015, A novel coupling of electrochemical impedance spectroscopy with atomic emission spectroelectrochemistry: application to the open circuit dissolution of zinc, Electrochim Acta, 168, 167, 10.1016/j.electacta.2015.03.171 Światowska, 2010, The anodic dissolution of Mg in NaCl and Na2SO4 electrolytes by atomic emission spectroelectrochemistry, Corros Sci, 52, 2372, 10.1016/j.corsci.2010.02.038 ASTM G1-03(2011). Standard practice for preparing, cleaning, and evaluating corrosion test specimens. ASTM International: West Conshohocken; 2011. Song, 2001, A hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys, 254 Rybalka, 2014, Determination of metal corrosion rate using the pH-metry by the method of compensating additives, Russ J Electrochem, 50, 500, 10.1134/S1023193514050085 Schweitzer, 1999 Graedel, 1986, Corrosion-related aspects of the chemistry and frequency of occurrence of precipitation, J Electrochem Soc, 133, 2476, 10.1149/1.2108453 Holm R, Mattsson E. Atmospheric corrosion tests of copper and copper alloys in Sweden - 16-year results. In: Atmospheric corrosion of metals, ASTM STP 767. American Society for Testing and Materials; 1982. p. 85–105. Rozenfeld, 1972 Sanders, 2015, The role of sulfur in the atmospheric corrosion of silver, J Electrochem Soc, 162, C630, 10.1149/2.0051512jes Yang, 2010, Atmospheric corrosion of field-exposed AZ91D magnesium alloys in a polluted environment, Corros Sci, 52, 2188, 10.1016/j.corsci.2010.03.011 Wang, 2012, Atmospheric corrosion of aluminium alloy 2024–T3 exposed to salt lake environment in Western China, Corros Sci, 59, 63, 10.1016/j.corsci.2012.02.015 Li, 2013, Atmospheric corrosion of AM60 magnesium alloys in an industrial city environment, Corros Sci, 69, 67, 10.1016/j.corsci.2012.11.022 Cui, 2013, Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment, Corros Sci, 76, 243, 10.1016/j.corsci.2013.06.047 Liao, 2015, Atmospheric corrosion behavior of field-exposed magnesium alloys: influences of chemical composition and microstructure, Corros Sci, 100, 353, 10.1016/j.corsci.2015.08.021 Liao, 2016, Corrosion products of field-exposed Mg-Al series magnesium alloys, Corros Sci, 112, 276, 10.1016/j.corsci.2016.07.023 Liao, 2013, Atmospheric corrosion of two field-exposed AZ31B magnesium alloys with different grain size, Corros Sci, 71, 53, 10.1016/j.corsci.2013.02.003 Jönsson, 2008, Atmospheric corrosion of field-exposed magnesium alloy AZ91D, Corros Sci, 50, 1406, 10.1016/j.corsci.2007.12.005 Jönsson, 2008, Accelerated corrosion tests for magnesium alloys: do they really simulate field conditions? Leygraf, 2000 Rendahl, 2009 Schindelholz, 2013, Comparability and accuracy of time of wetness sensing methods relevant for atmospheric corrosion, Corros Sci, 67, 233, 10.1016/j.corsci.2012.10.026 Song, 2014 Liu, 2009, Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys, Corros Sci, 51, 602, 10.1016/j.corsci.2008.12.015 Zhao, 2009, An exploratory study of the corrosion of magnesium alloys during interrupted salt spray testing, Corros Sci, 51, 1277, 10.1016/j.corsci.2009.03.014 Corrosion testing standard. VCS 1027, 1449. Accelerated corrosion test, version II-ACT II, Volvo Car Corporation; 2014. Corrosion testing standard. VDA 233-102, Cyclic corrosion testing of materials and components in automotive construction, VDA; 2013. Ström M. 5th Int. Seminar in the Field of Automotive Corrosion: Findings and conclusions from three decades of automotive corrosion testing;2013 . Vernon, 1935, A laboratory study of the atmospheric corrosion of metals. Part II.—Iron: the primary oxide film. Part III.—the secondary product or rust (influence of sulphur dioxide, carbon dioxide, and suspended particles on the rusting of iron, Trans Faraday Soc, 31, 1668, 10.1039/TF9353101668 Svensson, 1993, A laboratory study of the initial stages of the atmospheric corrosion of zinc in the presence of NaCl; Influence of SO2 and NO2, Corros Sci, 34, 721, 10.1016/0010-938X(93)90096-Y Niklasson, 2008, The influence of relative humidity and temperature on the acetic acid vapour-induced atmospheric corrosion of lead, Corros Sci, 50, 3031, 10.1016/j.corsci.2008.08.009 Strandberg, 1997, Role of O3 in the atmospheric corrosion of copper in the presence of SO2, J Electrochem Soc, 144, 2334, 10.1149/1.1837814 Svensson, 1993, A laboratory study of the effect of ozone, nitrogen dioxide, and sulfur dioxide on the atmospheric corrosion of zinc, J Electrochem Soc, 140, 2210, 10.1149/1.2220797 Tada, 2007, Effects of particulate silica coatings on localized corrosion behavior of AISI 304SS under atmospheric corrosion conditions, J Electrochem Soc, 154, C318, 10.1149/1.2722535 Lin, 2013, Atmospheric corrosion of Cu during constant deposition of NaCl, J Electrochem Soc, 160, C336, 10.1149/2.037308jes Chen, 2010, Influence of UV irradiation and ozone on atmospheric corrosion of bare silver, Corros Eng Sci Techn, 45, 169, 10.1179/147842209X12579401586681 Hallama, 2016, Corrosion of the alloys Magnox AL80, Magnox ZR55 and pure magnesium in air containing water vapour, Corros Sci, 112, 347, 10.1016/j.corsci.2016.07.033 Jia, 2009, Influence of Al content on the atmospheric corrosion behaviour of Mg-aluminum alloys, J Mater Sci Tech, 25, 225 Christofer, 2016 Esmaily, 2015, Influence of temperature on the atmospheric corrosion of the magnesium alloy AM50, Corros Sci, 90, 420, 10.1016/j.corsci.2014.10.040 Esmaily, 2015, The influence of SO2 on the corrosion of magnesium and Mg-Al alloys, J Electrochem Soc, 162, C260, 10.1149/2.0801506jes Esmaily, 2015, Achieving superior corrosion resistance in friction stir processed AA6005-T6 aluminum alloy joints, ECS Trans, 64, 29, 10.1149/06426.0029ecst Shahabi-Navid, 2014, NaCl-induced atmospheric corrosion of the MgAl alloy AM50-the influence of CO2, J Electrochem Soc, 161, C277, 10.1149/2.088405jes Esmaily, 2015, On the capability of in situ exposure in an environmental scanning electron microscope for investigating the atmospheric corrosion of Mg, Ultramicro, 153, 45, 10.1016/j.ultramic.2015.02.010 Esmaily, 2016, Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool, Corros Sci, 111, 98, 10.1016/j.corsci.2016.04.046 Strekalov, 1993, Atmospheric corrosion of metals in the tropics and subtropics.II. The corrosion resistance of various metals and alloys, Prot Met, 29, 673 Zakipour, 1997, Atmospheric corrosion effects of SO2, NO2, and O3. A comparison of laboratory and field exposed nickel, J Electrochem Soc, 144, 3513, 10.1149/1.1838042 Albright, 1987, Rrelationship of microstructure and corrosion performance in cast magnesium alloys, JOM, 39, 32 Makar, 1992, Repassivation of rapidly solidified Mg-aluminum alloys, J Electrochem Soc, 139, 47, 10.1149/1.2069197 Underwood, 1970 Practical guide to image analysis. ASM International, Materials Park; 2000. Wojnar, 1998 Pyrz, 1994, Quantitative description of the microstructure of composites. Part I: morphology of unidirectional composite systems, Compos Sci Technol, 50, 197, 10.1016/0266-3538(94)90141-4 Tzamtzis, 2009, Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing - a novel rheo-process, Compos Part A Appl Sci Manuf, 40, 144, 10.1016/j.compositesa.2008.10.017 Rogers, 1974 Esmaily, 2016, A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites, Compos Part B: Eng, 94, 176, 10.1016/j.compositesb.2016.02.019 Alkemper, 2001, Quantitative serial sectioning analysis, J Microsc, 388, 201 Prakash, 2008, Effect of long term annealing on the microstructure of hpdc AZ91 magnesium alloy: a quantitative analysis by image processing, Comp Mater Sci, 43, 759, 10.1016/j.commatsci.2008.01.040 Tewari, 2006, Nearest-neighbor distributions in thin films, sheets, and plates, Acta Mater, 54, 1957, 10.1016/j.actamat.2005.12.017 Xia, 2016, An artificial neural network for predicting corrosion rate and hardness of magnesium alloys, Mater Des, 90, 1034, 10.1016/j.matdes.2015.11.040 Kirkland, 2011, Performance-driven design of Biocompatible Magnesium alloys, JOM, 63, 28, 10.1007/s11837-011-0089-z Birbilis, 2011, A combined neural network and mechanistic approach for the prediction of corrosion rate and yield strength of Mg-rare earth alloys, Corros Sci, 53, 168, 10.1016/j.corsci.2010.09.013 Willumeit, 2013, Magnesium degradation as determined by artificial neural networks, Acta Biomater, 9, 8722, 10.1016/j.actbio.2013.02.042 Kappatos, 2010, Assessment of the effect of existing corrosion on the tensile behaviour of magnesium alloy AZ31 using neural networks, Mater Des, 31, 336, 10.1016/j.matdes.2009.06.009 Mortazavi, 2015, The capability of Transmission Kikuchi Diffraction technique for characterizing nano-grained oxide scales formed on a FeCrAl stainless steel, Mater Lett, 147, 42, 10.1016/j.matlet.2015.02.008 Orlov, 2011, Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing, Acta Mater, 59, 6176, 10.1016/j.actamat.2011.06.033 Kima, 2013, Enhanced corrosion resistance of high strength Mg–3Al–1Zn alloy sheets with ultrafine grains in a phosphate-buffered saline solution, Corros Sci, 74, 139, 10.1016/j.corsci.2013.04.035 Pu, 2012, Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B magnesium alloy, Corros Sci, 57, 192, 10.1016/j.corsci.2011.12.018 Bland, 2016, Metallurgical and electrochemical characterization of the corrosion of a Mg-Al-Zn Alloy AZ31B-H24 tungsten inert gas weld: galvanic corrosion between weld zones, Corrosion, 72, 1226, 10.5006/2078 Esmaily, 2015, Atmospheric corrosion of magnesium alloy AZ91D fabricated by a semi-solid casting technique - The influence of microstructure, J Electrochem Soc, 162, C311, 10.1149/2.0341507jes Thompson, 1910 Stratmann, 1987, The investigation of the corrosion properties of metals, covered with adsorbed electrolyte layers—a new experimental technique, Corros Sci, 27, 869, 10.1016/0010-938X(87)90043-6 Yee, 1991, Application of a Kelvin microprobe to the corrosion of metals in humid atmospheres, J Electrochem Soc, 138, 55, 10.1149/1.2085578 Rohwerder, 2007, High-resolution Kelvin probe microscopy in corrosion science: scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP), Electrochim Acta, 53, 290, 10.1016/j.electacta.2007.03.016 Hurley, 2015, Volta Potentials measured by scanning Kelvin probe force microscopy as relevant to corrosion of magnesium alloys, Corrosion, 71, 160, 10.5006/1432 Guillaumin, 2001, Characterization of corrosion interfaces by the scanning kelvin probe force microscopy technique, J Electrochem Soc, 148, B163, 10.1149/1.1359199 Schmutz, 1998, Characterization of AA2024-T3 by scanning kelvin probe force microscopy, J Electrochem Soc, 145, 2285, 10.1149/1.1838633 Örnek, 2015, SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel, Corros Sci, 99, 164, 10.1016/j.corsci.2015.06.035 Pan, 2012, Corrosion behavior of a duplex stainless steel under cyclic loading: a scanning Kelvin probe force microscopy (SKPFM) based microscopic study, J Appl Electrochem, 42, 1049, 10.1007/s10800-012-0479-0 Jönsson, 2006, The influence of microstructure on the corrosion behaviour of AZ91D studied by scanning Kelvin probe force microscopy and scanning Kelvin probe, Corros Sci, 48, 1193, 10.1016/j.corsci.2005.05.008 Dauphin-Ducharme, 2015, Determination of the local corrosion rate of magnesium alloys using a shear force mounted scanning microcapillary method, Faraday Discuss, 180, 331, 10.1039/C4FD00276H Arrabal, 2015, Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ91, Corros Sci, 97, 38, 10.1016/j.corsci.2015.04.004 Williams, 2011, Chloride-induced filiform corrosion of organic-coated magnesium, Electrochim Acta, 56, 1894, 10.1016/j.electacta.2010.09.005 Baek, 2016, Effect of alloyed Ca on the microstructure and corrosion properties of extruded AZ61 magnesium alloy, Corros Sci, 112, 44, 10.1016/j.corsci.2016.07.011 Mingo, 2015, Enhanced corrosion resistance of AZ91 alloy produced by semisolid metal processing, J Electrochem Soc, 162, C180, 10.1149/2.0521504jes Feliu, 2011, The application of X-ray photoelectron spectroscopy in understanding corrosion mechanisms of magnesium and Mg-Al alloys, Open Surf Sci J, 3, 1, 10.2174/1876531901103010001 Esmaily, 2016, New insights into the corrosion of magnesium alloys - the role of aluminum, Scripta Mater, 115, 91, 10.1016/j.scriptamat.2016.01.008 Esmaily, 2016, A ToF-SIMS investigation of the corrosion behavior of magnesium alloy AM50 in atmospheric environments, Appl Surf Sci, 360, 98, 10.1016/j.apsusc.2015.11.002 Bakhsheshi-Rad, 2013, Synthesis and in vitro degradation evaluation of the nano-HA/MgF2 and DCPD/MgF2 composite coating on biodegradable Mg–Ca–Zn alloy, Surf Coat Technol, 222, 79, 10.1016/j.surfcoat.2013.02.007 Birbilis, 2015, Nuclear microprobe analysis for determination of element enrichment following magnesium dissolution, ECS Electrochem Lett, 4, C34, 10.1149/2.0081510eel Whitby, 1933, The atmospheric corrosion of Mg, Trans Farad Soc, 29, 0844, 10.1039/tf9332900844 Waseda, 2011 Zolotoyabko, 2014, Basic concepts of X-ray diffraction, Wiley Pawley, 2012 Esmaily, 2015, Corrosion behavior of alloy AM50 in semisolid cast and high-pressure die cast states in cyclic conditions, Corrosion, 71, 737, 10.5006/1601 Giannuzzi, 2005 Burnett, 2016, Large volume serial section tomography by Xe Plasma FIB dual beam microscopy, Ultramicroscopy, 161, 119, 10.1016/j.ultramic.2015.11.001 Taheri, 2016, Towards a physical description for the origin of enhanced catalytic activity of corroding magnesium surfaces, Electrochim Acta, 116, 396, 10.1016/j.electacta.2013.11.086 Taheri, 2012, Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM–EDS, Corros Sci, 59, 222, 10.1016/j.corsci.2012.03.001 Danaie, 2013, The role of aluminum distribution on the local corrosion resistance of the microstructure in a sand-cast AM50 alloy, Corros Sci, 77, 151, 10.1016/j.corsci.2013.07.038 Unocic, 2014, Transmission electron microscopy study of aqueous film formation and evolution on Mg alloys, J Electrochem Soc, 161, C302, 10.1149/2.024406jes Taheri, 2013, Nature of surface film formed on magnesium exposed to 1M NaOH, J Electrochem Soc, 160, C36, 10.1149/2.018302jes Phillips, 2013, Nature of surface film on matrix phase of magnesium alloy AZ80 formed in water, Corrosion, 69, 813, 10.5006/0938 Taheri, 2014, TEM examination of the film formed on corroding magnesium prior to breakdown, J Electrochem Soc, 161, C89, 10.1149/2.017403jes Asmussen, 2013, Tracking the corrosion of magnesium sand cast AM50 alloy in chloride environments, Corros Sci, 75, 114, 10.1016/j.corsci.2013.05.022 Chu, 2015, Linking the microstructure of a heat-treated WE43 magnesium alloy with its corrosion behavior, Corros Sci, 101, 94, 10.1016/j.corsci.2015.09.005 Williams, 2009 Kang, 2016, Multi-functional magnesium alloys containing interstitial oxygen atoms, Sci Rep Zhang, 2015, Mitigation of corrosion on magnesium alloy by predesigned surface corrosion, Sci Rep, 5, 17399, 10.1038/srep17399 Lagos, 2017, Mapping vibrational surface and bulk modes in a single nanocube, Nature, 543, 529, 10.1038/nature21699 Warner, 1992, A cross-sectional TEM study of corrosion initiation in rapidly solidified Mg-based ribbons, Surf Interf Anal, 19, 386, 10.1002/sia.740190172 Zhou, 2012, Study of localized corrosion in AA2024-T3 aluminium alloy using electron tomography, Corros Sci, 58, 299, 10.1016/j.corsci.2012.02.001 Hashimoto, 2016, 3D imaging by serial block face scanning electron microscopy for materials science using ultramicrotomy, Ultramicroscopy, 163, 6, 10.1016/j.ultramic.2016.01.005 Krebs, 2015, Time-lapse correlative 3D imaging applied to the corrosion study of AZ31 Mg alloy in a saline environment (conference paper), FIMPART Hyderabad India, 1 Shahabi-Navid, 2015 Heide, 2011 Hofmann, 2013 Feliu, 2009, Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys, Appl Surf Sci, 255, 4102, 10.1016/j.apsusc.2008.10.095 Feliu, 2009, XPS study of the effect of aluminium on the atmospheric corrosion of the AZ31 magnesium alloy, Surf Interf Anal, 41, 143, 10.1002/sia.3004 Ballerini, 2005, About some corrosion mechanisms of AZ91D magnesium alloy, Corros Sci, 47, 2173, 10.1016/j.corsci.2004.09.018 Hallam, 2016, Corrosion of the alloys Magnox AL80, Magnox ZR55 and pure magnesium in air containing water vapour, Corros Sci, 112, 347, 10.1016/j.corsci.2016.07.033 Wang, 2010, XPS study of the surface chemistry on AZ31 and AZ91 magnesium alloys in dilute NaCl solution, Appl Surf Sci, 256, 5807, 10.1016/j.apsusc.2010.02.058 Santamaria, 2007, Initial surface film on magnesium metal: a characterization by X-ray photoelectron spectroscopy (XPS) and photocurrent spectroscopy (PCS), Electrochim Acta, 53, 1314, 10.1016/j.electacta.2007.03.019 Cui, 2008, Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy, Appl Surf Sci, 255, 2098, 10.1016/j.apsusc.2008.06.199 Montemor, 2007, Characterization of rare-earth conversion films formed on the AZ31 magnesium alloy and its relation with corrosion protection, Appl Surf Sci, 253, 6922, 10.1016/j.apsusc.2007.02.019 Wang, 2007, Effects of tantalum ion implantation on the corrosion behavior of AZ31 magnesium alloys, J Alloys Compd, 437, 87, 10.1016/j.jallcom.2006.07.074 Montemor, 2008, Composition and corrosion resistance of cerium conversion films on the AZ31 magnesium alloy and its relation to the salt anion, Appl Surf Sci, 254, 1806, 10.1016/j.apsusc.2007.07.187 Saniger, 1990, An auger electron spectroscopy study of the fluorination of Al-7075 alloy, Corros Sci, 30, 107, 10.1016/0010-938X(90)90240-6 Arnott, 1985, Auger and XPS studies of cerium corrosion inhibition on 7075 aluminum alloy, Appl Surf Sci, 22–23, 236 Hughes, 1996, The characterisation of Ce-Mo-based conversion coatings on Al-alloys: part I, Corros Sci, 38, 1957, 10.1016/S0010-938X(96)00088-1 Zheng, 2014, Biodegradable metals, Mater Sci Eng, R, 77, 1, 10.1016/j.mser.2014.01.001 Mahoney, 2013 Fearn, 2015 Brady, 2015, Tracer study of oxygen and hydrogen uptake by magnesium alloys in air with water vapor, Scripta Mater, 106, 38, 10.1016/j.scriptamat.2015.04.032 Seyeux, 2011, ToF-SIMS imaging study of the early stages of corrosion in Al-Cu thin films, J Electrochem Soc, 158, C165, 10.1149/1.3568944 Chang, 2008, ToF-SIMS and EIS to evaluate green pretreatment reagent: corrosion protection of aluminum alloy by silica/zirconium/cerium hybrid coating, Appl Surf Sci, 255, 1531, 10.1016/j.apsusc.2008.05.015 Seyeux, 2009, ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride, Corros Sci, 51, 1883, 10.1016/j.corsci.2009.06.002 Griffiths, 2007 Gaffney, 2003 Blücher, 2005, Influence of ppb levels of SO2 on the atmospheric corrosion of aluminum in the presence of NaCl, J Electrochem Soc, 152, B397, 10.1149/1.2008977 Ferraro, 2003 Kouisni, 2004, Phosphate coatings on magnesium alloy AM60 part 1: study of the formation and the growth of zinc phosphate films, Surf Coat Technol, 185, 58, 10.1016/j.surfcoat.2003.10.061 Zhang, 2013, Degradable behavior and bioactivity of micro-arc oxidized AZ91D magnesium alloy with calcium phosphate/chitosan composite coating in m-SBF, Colloids Surf., B, 111, 179, 10.1016/j.colsurfb.2013.05.040 Zuleta, 2011, Comparative study of different environmentally friendly (Chromium-free) methods for surface modification of pure magnesium, Surf Coat Technol, 205, 5254, 10.1016/j.surfcoat.2011.05.048 Samaniego, 2015, On the evidence for univalent Mg, J Electroanal Chem, 737, 123, 10.1016/j.jelechem.2014.04.013 Fritz, 2009 Nash, 1992, Application of ion chromatography to corrosion studies, J Chromatogr A, 602, 135, 10.1016/0021-9673(92)80073-4 Jönsson, 2007, Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D, Corros Sci, 49, 1540, 10.1016/j.corsci.2006.08.004 Stokes, 2011 Mortazavi, 2016, In situ investigation of the initial stages of KCl-induced corrosion of a chromia-forming steel at 450°C using an environmental scanning electron microscope, Corrosion, 72, 23 Mortazavi, 2015, In situ ESEM investigation of KCl-induced corrosion of a FeCrAl and a model FeNiCrAl alloy in lab air at 450°C, J Electrochem Soc, 162, C744, 10.1149/2.0581514jes Chen, 2011, Effect of temperature on initial corrosion of AZ91 magnesium alloy under cyclic wet-dry conditions, Corros Eng Sci Technol, 46, 267, 10.1179/147842208X338965 Turnbull, 2014, Corrosion pitting and environmentally assisted small crack growth, Proc Math Phys Eng Sci, 470, 20140254 Burnett, 2014, Correlative tomography, Sci Rep, 4, 4711, 10.1038/srep04711 Connolly, 2006, X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking, Mater Sci Technol, 22, 1076, 10.1179/174328406X114199 Davenport, 2007, Synchrotron X-ray microtomography study of the role of Y in corrosion of magnesium alloy WE43, Electrochem Solid State Lett, 10, C5, 10.1149/1.2400727 Hörnqvist, 2015, Deformation and texture evolution of OFHC copper during dynamic tensile extrusion, Acta Mater, 89, 163, 10.1016/j.actamat.2015.01.053 Chyrkin, 2015, Effect of thermal cycling on protective properties of alumina scale grown on thin Haynes 214 foil, Corros Sci, 98, 688, 10.1016/j.corsci.2015.06.020 Lozano-Perez, 2008, High-resolution imaging of complex crack chemistry in reactor steels by NanoSIMS, J Nucl Mater, 374, 61, 10.1016/j.jnucmat.2007.07.009 Thomas, 2000, High-resolution characterization of intergranular attack and stress corrosion cracking of alloy 600 in high-temperature primary water, Corrosion, 56, 572, 10.5006/1.3280561 Nastasi, 2014 Mandò, 2006 Cabrera, 1948, Theory of the oxidation of metals, Rep Progr Phys, 12, 163, 10.1088/0034-4885/12/1/308 Do, 1997, The oxidation kinetics of magnesium and Al surfaces studied by AES and XPS, Surf Sci, 387, 192, 10.1016/S0039-6028(97)00351-8 Mathaudhu, 2014 Xu, 2000, Pilling-Bedworth ratio for oxidation of alloys, Mater Res Innov, 3, 231, 10.1007/s100190050008 Splinter, 1994, The initial interaction of water-vapor with Mg-Al alloy surfaces at room-temperature, Surf Sci, 314, 157, 10.1016/0039-6028(94)90003-5 Wlodarczyk, 2011, Structures of the ordered water monolayer on MgO(001), J Phys Chem C, 115, 6764, 10.1021/jp200112c Ončák, 2015, Water on the MgO(001) surface: surface reconstruction and ion solvation, J Phys Chem Lett, 6, 2310, 10.1021/acs.jpclett.5b00885 Ončák, 2016, Hydration structures of MgO, CaO, and SrO(001) surfaces, J Phys Chem C, 120, 24762, 10.1021/acs.jpcc.6b07434 Refson, 1995, Water chemisorption and reconstruction of the MgO surface, Phys Rev B, 52, 10823, 10.1103/PhysRevB.52.10823 Martell, 1974-1989 Cain, 2014, A compilation of corrosion potentials for magnesium alloys, Corrosion, 70, 1043, 10.5006/1257 Atrens, 2007, The negative difference effect and unipositive Mg, Adv Eng Mater, 9, 292, 10.1002/adem.200600275 Turrentine, 1907, Reversed electrolysis, J Phys Chem, 12, 448, 10.1021/j150096a006 Song, 1999, Corrosion mechanisms of magnesium alloys, Adv Eng Mater, 1, 11, 10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N Song, 2007, Recent insights into the mechanism of magnesium corrosion and research suggestions, Adv Eng Mater, 9, 177, 10.1002/adem.200600221 Atrens, 2011, Corrosion mechanism applicable to biodegradable magnesium implants, Mater Sci Eng B: Solid-State Mater Adv Technol, 176, 1609, 10.1016/j.mseb.2010.12.017 Shi, 2012, Galvanostatic anodic polarisation curves and galvanic corrosion of high purity magnesium in 3.5% NaCl saturated with Mg(OH)2, Corros Sci, 60, 296, 10.1016/j.corsci.2011.12.002 Song, 2003, Understanding magnesium corrosion-a framework for improved alloy performance, Adv Eng Mater, 5, 837, 10.1002/adem.200310405 Shi, 2014, Low apparent valence of magnesium during corrosion, Corros Sci, 88, 434, 10.1016/j.corsci.2014.07.060 Kirkland, 2012, Observations of the galvanostatic dissolution of pure Mg, Corros Sci, 65, 5, 10.1016/j.corsci.2012.08.029 Bender, 2013, A new theory for the negative difference effect in magnesium corrosion, Mater Corros, 63, 707, 10.1002/maco.201106225 Rossrucker, 2015, The pH dependence of magnesium dissolution and hydrogen evolution during anodic polarization, J Electrochem Soc, 162, C333, 10.1149/2.0621507jes Rossrucker, 2014, Investigating the real time dissolution of magnesium using online analysis by ICP-MS, J Electrochem Soc, 161, C115, 10.1149/2.064403jes Lebouil, 2015, Mg dissolution in phosphate and chloride electrolytes: insight into the mechanism of the negative difference effect, Corrosion, 71, 234, 10.5006/1459 Williams, 2015, Controlling factors in localised corrosion morphologies observed for magnesium immersed in chloride containing electrolyte, Faraday Discuss, 180, 313, 10.1039/C4FD00268G Lysne, 2015, On the Fe enrichment during anodic polarization of magnesium and its impact on hydrogen evolution, J Electrochem Soc, 162, C396, 10.1149/2.0251508jes Fajardo, 2017, The evolution of anodic hydrogen on high purity magnesium in acidic buffer solution, Corrosion, 73, 482, 10.5006/2247 Hoche, 2016, The effect of iron re-deposition on the corrosion of impurity-containing magnesium, Phys Chem Chem Phys, 18, 1279, 10.1039/C5CP05577F Buchheit, 1997, Local Dissolution Phenomena Associated with S Phase (Al2CuMg) Particles in Aluminum Alloy 2024–T3, J Electrochem Soc, 144, 2621, 10.1149/1.1837874 Lamaka, 2016, A new concept for corrosion inhibition of magnesium: suppression of iron re-deposition, Electrochem Comm, 62, 5, 10.1016/j.elecom.2015.10.023 Yuwono, 2016, Electrochemical stability of magnesium surfaces in an aqueous environment, J Phys Chem C, 120, 26922, 10.1021/acs.jpcc.6b09232 Williams, 2015, First principles modeling of water dissociation on Mg(0001) and development of a magnesium surface pourbaix diagram, Corrosion, 71, 209, 10.5006/1322 Bockris, 2000 Frankel, 2015, Introductory lecture on corrosion chemistry: a focus on anodic hydrogen evolution on Al and Mg, Faraday Discuss, 180, 11, 10.1039/C5FD00066A Taylor, 2016, A first-principles surface reaction kinetic model for hydrogen evolution under cathodic and anodic conditions on Mg, J Electrochem Soc, 163, 10.1149/2.1171609jes Hanawalt, 1942, Corrosion studies of magnesium and its alloys, Trans AIME, 147, 273 Samaniego, 2014, Exploring the possibility of protective surface oxides upon Mg alloy AZ31 via lutetium additions, Corros Sci, 89, 101, 10.1016/j.corsci.2014.08.015 Ghali, 2010, Corrosion resistance of aluminum and magnesium alloys: understanding, performance, and testing, Wiley Okamoto, 2000 Massalski, 1990 Nayeb-Hashemi, 1985, The Li-Mg (Lithium-Mg) system, Bull Alloy Phase Diagram, 5, 365, 10.1007/BF02872951 Makar, 1993, Corrosion of Mg, Inter Mater Rev, 38, 138, 10.1179/imr.1993.38.3.138 Liu, 2010, The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys, Corros Sci, 52, 3687, 10.1016/j.corsci.2010.07.019 Sudholz, 2011, Electrochemical behaviour and corrosion of Mg–Y alloys, Corros Sci, 53, 2277, 10.1016/j.corsci.2011.03.010 Liu, 2008, Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys, JOM, 60, 39, 10.1007/s11837-008-0164-2 Gandel, 2014, CALPHAD simulation of the Mg–(Mn, Zr)–Fe system and experimental comparison with as-cast alloy microstructures as relevant to impurity driven corrosion of Mg-alloys, Mater Chem Phys, 143, 1082, 10.1016/j.matchemphys.2013.11.008 Simanjuntak, 2015, The influence of iron, manganese, and zirconium on the corrosion of magnesium: an artificial neural network approach, Corrosion, 71, 199, 10.5006/1467 Shaw, 2003, Corrosion resistance of magnesium alloys, ASM Int, 13A, 692 Hillis JE, Reichek KN. Paper 870288. Society of Automotive Engineers; 1986. Xia, 2015, The influence of low levels of Zn, Ca, Gd, Sr and Zr on the corrosion of magnesium for wrought applications, Corrosion, 71, 1370, 10.5006/1802 Lunder, 1989, The role of Mg17Al12 phase in the corrosion of Mg alloy AZ91, Corrosion, 45, 741, 10.5006/1.3585029 Williams, 2012, Localized corrosion of binary Mg-Nd alloys in chloride-containing electrolyte using a scanning vibrating electrode technique, Corrosion, 68, 489, 10.5006/i0010-9312-68-6-489 Birbilis, 2013, Poisoning the corrosion of magnesium, Electrochem Commun, 34, 295, 10.1016/j.elecom.2013.07.021 Liu, 2016, Controlling the corrosion and cathodic activation of magnesium via microalloying additions of Ge, Sci Rep, 6 Kirkland, 2010, In-vitro dissolution of magnesium–calcium binary alloys: clarifying the unique role of calcium additions in bioresorbable magnesium implant alloys, J Biomed Mater Res B: Appl Biomater, 95B, 91, 10.1002/jbm.b.31687 Gandel, 2013, Influence of Mn and Zr on the corrosion of Al-free Mg alloys: part 2—impact of Mn and Zr on Mg alloy electrochemistry and corrosion, Corrosion, 69, 744, 10.5006/0828 Zhang, 2011, Experimental study of the Ca–Mg–Zn system using diffusion couples and key alloys, Sci Technol Adv Mater, 12, 10.1088/1468-6996/12/2/025003 Gu, 2005, Mg–Ca–Zn bulk metallic glasses with high strength and significant ductility, J Mater Res, 20, 1935, 10.1557/JMR.2005.0245 Zberg, 2009, MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants, Nat Mater, 8, 887, 10.1038/nmat2542 Laws, 2012, Analysis of dynamic segregation and crystallisation in Mg65Cu25Y10 bulk metallic glass using atom probe tomography, Mater Sci Eng, A, 556, 558, 10.1016/j.msea.2012.07.026 Ma, 2005, Doubling the critical size for bulk metallic glass formation in the Mg–Cu–Y ternary system, J Mater Res, 20, 2252, 10.1557/jmr.2005.0307 Zhou, 2013, Effect of the degree of crystallinity on the electrochemical behavior of Mg65Cu25Y10 and Mg70Zn25Ca5 bulk metallic glasses, Corrosion, 69, 781, 10.5006/0870 Südholz, 2011, Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys, Electrochem Solid St, 14, C5, 10.1149/1.3523229 Kirkland, 2010, A survey of bio-corrosion rates of magnesium alloys, Corros Sci, 52, 287, 10.1016/j.corsci.2009.09.033 Xia, 2014, Influence of composition and processing on the corrosion of magnesium alloys containing binary and ternary additions of zinc and strontium, Corrosion, 71, 38, 10.5006/1417 Gandel, 2014, The influence of zirconium additions on the corrosion of magnesium, Corros Sci, 81, 27, 10.1016/j.corsci.2013.11.051 Hou, 2016, Investigating the passivity and dissolution of a corrosion resistant Mg-33at.%Li alloy in aqueous chloride using online ICP-MS, J Electrochem Soc, 163, 10.1149/2.0871606jes Williams, 2016, The influence of arsenic alloying on the localised corrosion behaviour of magnesium, Electrochim Acta, 219, 401, 10.1016/j.electacta.2016.10.006 Ralston, 2012, Effect of pH on the grain size dependence of magnesium corrosion, Corrosion, 68, 507, 10.5006/i0010-9312-68-6-507 Hihara, 1994, Corrosion of metal matrix composites, Int Mater Rev, 39, 245, 10.1179/imr.1994.39.6.245 Dieringa, 2004, Magnesium based MMCs reinforced with C-fibers, Adv Techn Mater Process, 6, 136 Turnbull, 1992, Review of corrosion studies on aluminium metal matrix composites, Br Corros J, 27, 27, 10.1179/000705992798268864 Trzaskoma, 1986, Corrosion behavior of a graphite fiber/magnesium metal matrix composite in aqueous chloride solution, Corrosion, 42, 609, 10.5006/1.3583031 Hall, 1987, Corrosion of carbon/magnesium metal matrix composites, Scripta Metall, 21, 1717, 10.1016/0036-9748(87)90164-5 Hihara, 1993, The galvanic corrosion of SiC monofilament/ZE41 Mg metal-matrix composite in 0.5 M NaNO3, Corros Sci, 34, 1761, 10.1016/0010-938X(93)90014-8 Gupta, 2011 Ye, 2004, Review of recent studies in magnesium matrix composites, J Mater Sci, 39, 6153, 10.1023/B:JMSC.0000043583.47148.31 Gupta, 2015, Mg-based nanocomposites: lightweight materials of the future, Mater Charact, 105, 30, 10.1016/j.matchar.2015.04.015 Razavi, 2010, Fabrication and characterization of magnesium–fluorapatite nanocomposite for biomedical applications, Mater Charact, 61, 1363, 10.1016/j.matchar.2010.09.008 Gupta, 2012, Electrochemical behavior and localized corrosion associated with Mg2Si Particles in Al and Mg alloys, ECS Electrochem Lett, 1, C1, 10.1149/2.002201eel Esmaily, 2016, On the microstructure and corrosion behavior of AZ91/SiC composites produced by rheocasting, Mater Chem Phys, 180, 29, 10.1016/j.matchemphys.2016.05.016 Chawla, 2006 Huang, 2015, Fabrication and characterization of a biodegradable Mg–2Zn–0.5Ca/1β-TCP composite, Mater Sci Eng C, 54, 120, 10.1016/j.msec.2015.05.035 Wu, 2013, In vitro study on biodegradable AZ31 magnesium alloy fibers reinforced PLGA composite, J Mater Sci Technol, 29, 545, 10.1016/j.jmst.2013.03.004 Khalajabadi, 2015, Fabrication, bio-corrosion behavior and mechanical properties of a Mg/HA/MgO nanocomposite for biomedical applications, Mater Des, 88, 1223, 10.1016/j.matdes.2015.09.065 Clyne T, Withers P. An introduction to metal matrix composites, Cambridge solid state science series; 1993. Voyiadjis, 1999 Davim, 2012 Kainer, 2006 Mazumdar, 2010 Hort, 2006, Magnesium matrix composites Schiffl, 2009, Influence of SiC particles on the grain refinement of an Mg-Al alloy, Mater Sci Forum, 618–619, 445, 10.4028/www.scientific.net/MSF.618-619.445 Feldhoff, 1999, Carbon-fibre reinforced magnesium alloys: nanostructure and chemistry of interlayers and their effect on mechanical properties, J Micros, 196, 185, 10.1046/j.1365-2818.1999.00618.x Flower, 1987, Magnox oxidation in carbon dioxide, 128 Viala, 2000, The chemical behaviour of carbon fibres in magnesium base Mg-Al alloys, J Mater Sci, 35, 1813, 10.1023/A:1004745006226 Mingo, 2017, Corrosion and wear of PEO coated AZ91/SiC composites, Surf Coat Technol, 309, 1023, 10.1016/j.surfcoat.2016.10.041 Hihara, 1994, Galvanic corrosion between SiC monofilament and magnesium in NaCl, Na2SO4 and NaNO3 solutions for application to metal-matrix composites, Corros Sci, 36, 1585, 10.1016/0010-938X(94)90055-8 Nunez-Lopez, 1995, The corrosion behaviour of magnesium alloy ZC71/SiCp metal matrix composite, Corros Sci, 37, 689, 10.1016/0010-938X(95)80003-4 Nunez-Lopez, 1996, An investigation of microgalvanic corrosion using a model magnesium-silicon carbide metal matrix composite, Corros Sci, 38, 1721, 10.1016/S0010-938X(96)00068-6 Chan, 1998, Corrosion behaviour of magnesium alloy AZ91 and its MMC in NaCl solution, Corros Rev, 16, 43, 10.1515/CORRREV.1998.16.1-2.43 Yue, 1998, Improvement in the corrosion resistance of magnesium ZK60/SiC composite by excimer laser surface treatment, Scripta Mater, 38, 191, 10.1016/S1359-6462(97)00495-8 Yue, 1999, Corrosion resistance enhancement of magnesium ZK60/SiC composite by Nd:YAG laser cladding, Scripta Mater, 40, 303, 10.1016/S1359-6462(98)00416-3 Yue, 2001, Laser cladding of stainless steel on magnesium ZK60/SiC composite, Mater Lett, 47, 165, 10.1016/S0167-577X(00)00230-5 Wang, 2001, YAG laser cladding of an Al-Si alloy onto an Mg/SiC composite for the improvement of corrosion resistance, Compos Sci Technol, 61, 1549, 10.1016/S0266-3538(01)00054-9 Mei, 2005, The effect of laser cladding on the corrosion resistance of magnesium ZK60/SiC composite, J Mater Process Technol, 161, 462, 10.1016/j.jmatprotec.2004.07.084 Zucchi, 2004, Corrosion behavior in sodium sulfate and sodium chloride solutions of SiCp reinforced magnesium alloy metal matrix composites, Corrosion, 60, 362, 10.5006/1.3287744 Suqiu, 2005, The corrosion behaviour of magnesium alloy AZ91D/TiCp metal matrix composite, Mater Sci Forum, 488–489, 705 Wang, 2005, Microarc oxidation coating formed on SiCw/AZ91 magnesium matrix composite and its corrosion resistance, Mater Lett, 59, 1727, 10.1016/j.matlet.2005.01.050 Tiwari, 2007, Corrosion behavior of SiC reinforced magnesium composites, Corros Sci, 49, 711, 10.1016/j.corsci.2006.05.047 Bakkar, 2007, Corrosion characterisation of alumina-Mg metal matrix composites, Corros Sci, 49, 1110, 10.1016/j.corsci.2006.07.002 Endo, 2008, An anticorrosive magnesium/carbon nanotube composite, Appl Phys Lett, 92, 10.1063/1.2842411 Budruk Abhijeet, 2008, Corrosion behaviour of Mg–Cu and Mg–Mo composites in 3.5% NaCl, Corros Sci, 50, 2423, 10.1016/j.corsci.2008.06.043 Bakkar, 2009, Corrosion behaviour of carbon fibres/Mg metal matrix composite and electrochemical response of its constituents, Electrochim Acta, 54, 1597, 10.1016/j.electacta.2008.09.064 Xue, 2009, Anti-corrosion microarc oxidation coatings on SiCP/AZ31 magnesium matrix composite, J Alloys Compd, 482, 208, 10.1016/j.jallcom.2009.03.159 Arrabal, 2009, Coating formation by plasma electrolytic oxidation on ZC71/SiC/12p-T6 magnesium metal matrix composite, Appl Surf Sci, 255, 5071, 10.1016/j.apsusc.2008.12.070 Pardo, 2009, Corrosion behaviour of silicon–carbide-particle reinforced AZ92 magnesium alloy, Corros Sci, 51, 841, 10.1016/j.corsci.2009.01.024 Aung, 2010, Effect of carbon nanotubes on corrosion of Mg–CNT composites, Corros Sci, 52, 1551, 10.1016/j.corsci.2010.02.025 Fukuda, 2010, The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy, Corros Sci, 52, 3917, 10.1016/j.corsci.2010.08.009 Falcon, 2011, Corrosion behavior of Mg-Al/TiC composites in NaCl solution, Int J Corros, 2011, 7, 10.1155/2011/896845 Turhan, 2011, Corrosion behaviour of multiwall carbon nanotube/Mg composites in 3.5% NaCl, Electrochim Acta, 56, 7141, 10.1016/j.electacta.2011.05.082 Hamid, 2011, Synthesis and protection of AM50 magnesium alloy and its composites using environmentally pretreatment electrolyte, Surf Coat Technol, 206, 1041, 10.1016/j.surfcoat.2011.07.062 Li, 2012, Influence of MWCNT dispersion on corrosion behaviour of their magnesium composites, Mater Corros, 63, 384, 10.1002/maco.201006023 Funatsu, 2013, Quantitative evaluation of initial galvanic corrosion behavior of CNTs reinforced Mg–Al alloy, Adv Powder Technol, 24, 833, 10.1016/j.apt.2013.02.002 Zhang, 2013, Effect of fiber volume fractions on corrosion resistance of magnesium AM60 alloy-based composites in NaCl solutions, 293 Mindivan, 2014, Fabrication and characterization of carbon nanotube reinforced magnesium matrix composites, Appl Surf Sci, 318, 234, 10.1016/j.apsusc.2014.04.127 Gobara, 2015, Improving the corrosion resistance of AZ91D magnesium alloy through reinforcement with titanium carbides and borides, J Magnes Alloys, 3, 112, 10.1016/j.jma.2015.03.002 Zhang, 2015, Effect of SiC particulates on the corrosion behavior of extruded AZ91/SiCp composites during the early stage of exposure, J Electrochem Soc, 162, C754, 10.1149/2.0631514jes Mondal, 2015, Corrosion behaviour of creep-resistant AE42 magnesium alloy-based hybrid composites developed for powertrain applications, Mater Corros, 66, 1150, 10.1002/maco.201408071 Kamieniak, 2015, The influence of reinforcement purity on corrosion resistance of AM50/SiC composites, Solid State Phenom, 227, 43, 10.4028/www.scientific.net/SSP.227.43 Hihara, 1991, Localized corrosion induced in graphite/aluminum metal-matrix composites by residual microstructural chloride, Corrosion, 47, 335, 10.5006/1.3585262 Hihara, 2010, Corrosion of metal matrix composites A2 - Cottis, Bob, 2250 Huang, 2011, Mechanism of grain refinement of Mg–Al alloys by SiC inoculation, Scripta Mater, 64, 793, 10.1016/j.scriptamat.2011.01.005 Arrabal, 2010, Corrosion behaviour of a magnesium matrix composite with a silicate plasma electrolytic oxidation coating, Corros Sci, 52, 3738, 10.1016/j.corsci.2010.07.024 Heublein, 2003, Biocorrosion of magnesium alloys: A new principle in cardiovascular implant technology?, Heart, 89, 651, 10.1136/heart.89.6.651 Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: A review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003 Williams, 2006, New interests in Mg, Med Device Technol, 17, 9 Shaw, 2008, Fix, heal, and disappear: a new approach to using metals in the human body, Electrochem Soc Interf, 17, 45, 10.1149/2.F07082IF Witte, 2008, Degradable biomaterials based on magnesium corrosion, Curr Opin Solid St Mater Sci, 12, 63, 10.1016/j.cossms.2009.04.001 Virtanen, 2011, Biodegradable Mg and Mg alloys: corrosion and biocompatibility, Mater Sci Eng B, 176, 1600, 10.1016/j.mseb.2011.05.028 Walker, 2014, Magnesium biomaterials for orthopedic application: a review from a biological perspective, J Biomed Mater Res B, 102, 1316, 10.1002/jbm.b.33113 Witte, 2010, The history of biodegradable magnesium implants: a review, Acta Biomater, 6, 1680, 10.1016/j.actbio.2010.02.028 Zheng, 2014, Biodegradable metals, Mater Sci Eng R, 77, 1, 10.1016/j.mser.2014.01.001 Navarro, 2008, Biomaterials in orthopaedics, J R Soc Interface, 5, 1137, 10.1098/rsif.2008.0151 Cecchinato, 2015, Influence of magnesium alloy degradation on undifferentiated human cells, PloS one, 10, e0142117, 10.1371/journal.pone.0142117 Gu, 2009, Influence of artificial biological fluid composition on the biocorrosion of potential orthopedic Mg–Ca, AZ31, AZ91 alloys, Biomed Mater, 4, 065011, 10.1088/1748-6041/4/6/065011 Xin, 2010, Influence of Tris in simulated body fluid on degradation behavior of pure Mg, Mater Chem Phys, 124, 33, 10.1016/j.matchemphys.2010.07.010 Xin, 2010, Influence of test solutions on in vitro studies of biomedical magnesium alloys, J Electrochem Soc, 157, 10.1149/1.3421651 Seuss, 2011, Corrosion of magnesium alloy AZ91D in the presence of living cells, J Biomed Mater Res B, 99 B, 276, 10.1002/jbm.b.31896 Virtanen, 2008, Special modes of corrosion under physiological and simulated physiological conditions, Acta Biomater, 4, 468, 10.1016/j.actbio.2007.12.003 Agha, 2016, Magnesium degradation influenced by buffering salts in concentrations typical of in vitro and in vivo models, Mater Sci Eng C, 58, 817, 10.1016/j.msec.2015.09.067 Walker, 2012, Magnesium alloys: Predicting in vivo corrosion with in vitro immersion testing, J Biomed Mater Res B, 100 B, 1134, 10.1002/jbm.b.32680 Kirkland, 2012, Buffer-regulated biocorrosion of pure magnesium, J Mater Sci Mater Med, 23, 283, 10.1007/s10856-011-4517-y Wagener, 2016, Protective layer formation on magnesium in cell culture medium, Mater Sci Eng C, 63, 341, 10.1016/j.msec.2016.03.003 Yamamoto, 2009, Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro, Mater Sci Eng C, 29, 1559, 10.1016/j.msec.2008.12.015 Zeng, 2015, In vitro degradation of pure magnesium in response to glucose, Sci Rep, 5, 13026, 10.1038/srep13026 Wagener, 2015, Protein interactions with corroding metal surfaces: Comparison of Mg and Fe, Faraday Discuss, 180, 347, 10.1039/C4FD00253A Wang, 2014, Flow-induced corrosion behavior of absorbable Mg-based stents, Acta Biomater, 10, 5213, 10.1016/j.actbio.2014.08.034 Silva-Bermudez, 2013, An overview of protein adsorption on metal oxide coatings for biomedical implants, Surf Coat Tech, 233, 147, 10.1016/j.surfcoat.2013.04.028 Hedberg, 2013, Surface-protein interactions on different stainless steel grades: effects of protein adsorption, surface changes and metal release, J Mater Sci Mater Med, 24, 1015, 10.1007/s10856-013-4859-8 Hedberg, 2014, Correlation between surface physicochemical properties and the release of iron from stainless steel AISI 304 in biological media, Colloid Surface B, 122, 216, 10.1016/j.colsurfb.2014.06.066 Lorenz, 2009, Effect of surface pre-treatments on biocompatibility of Mg, Acta Biomater, 5, 2783, 10.1016/j.actbio.2009.04.018 Keim, 2011, Control of magnesium corrosion and biocompatibility with biomimetic coatings, J Biomed Mater Res B, 96 B, 84, 10.1002/jbm.b.31742 Wagener, 2016, Cell adhesion on surface-functionalized magnesium, ACS Appl Mater Inter, 8, 11998, 10.1021/acsami.6b01747 Brooks, 2016, Influence of MC3T3-E1 preosteoblast culture on the corrosion of a T6-treated AZ91 alloy, J Biomed Mater Res B, 104, 253, 10.1002/jbm.b.33378 Hiromoto, 2004, PH near cells on stainless steel and titanium, Electrochem Solid St, 7, B9, 10.1149/1.1645353 Ahmad, 2016, The degradation interface of magnesium based alloys in direct contact with human primary osteoblast cells, Plos ONE, 11, e0157874, 10.1371/journal.pone.0157874 Zhang, 2016, Effect of macrophages on in vitro corrosion behavior of magnesium alloy, J Biomed Mater Res A, 104, 2476, 10.1002/jbm.a.35788 Sanchez, 2015, Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review, Acta Biomater, 13, 16, 10.1016/j.actbio.2014.11.048 Hiromoto, 2015, In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite, Acta Biomater, 11, 520, 10.1016/j.actbio.2014.09.026 Zhao, 2015, Endothelial responses of magnesium and other alloying elements in Mg-based stent materials, Metallomics, 7, 118, 10.1039/C4MT00244J Luthringer, 2016, Effects of magnesium degradation products on mesenchymal stem cell fate and osteoblastogenesis, Gene, 575, 9, 10.1016/j.gene.2015.08.028 Feyerabend, 2010, Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines, Acta Biomater, 6, 1834, 10.1016/j.actbio.2009.09.024 Grillo, 2014, Cellular response to rare earth mixtures (La and Gd) as components of degradable magnesium alloys for medical applications, Colloid Surface B, 117, 312, 10.1016/j.colsurfb.2014.02.030 Zhao, 2016, In vivo monitoring the biodegradation of magnesium alloys with an electrochemical H2 sensor, Acta Biomater, 36, 361, 10.1016/j.actbio.2016.03.039 Mackenzie, 1961, The effect of pH on growth, protein synthesis, and lipid-rich particles of cultured mammalian cells, J Biophys Biochem Cytology, 9, 141, 10.1083/jcb.9.1.141 Mareci, 2016, Electrochemical characteristics of bioresorbable binary MgCa alloys in Ringer's solution: revealing the impact of local pH distributions during in-vitro dissolution, Mater Sci Eng C, 60, 402, 10.1016/j.msec.2015.11.069 Robinson, 2010, In vitro antibacterial properties of magnesium metal against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus, Acta Biomater, 6, 1869, 10.1016/j.actbio.2009.10.007 Grillo, 2016, Degradation of bioabsorbable Mg-based alloys: assessment of the effects of insoluble corrosion products and joint effects of alloying components on mammalian cells, Mater Sci Eng C, 58, 372, 10.1016/j.msec.2015.08.043 Chen, 2014, Recent advances on the development of magnesium alloys for biodegradable implants, Acta Biomater, 10, 4561, 10.1016/j.actbio.2014.07.005 Zhang, 2013, The effect of selected alloying element additions on properties of Mg-based alloy as bioimplants: a literature review, Front Mater Sci, 7, 227, 10.1007/s11706-013-0210-z Hofstetter, 2015, Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivo, Corros Sci, 91, 29, 10.1016/j.corsci.2014.09.008 Hofstetter, 2014, High-strength low-alloy (HSLA) Mg–Zn–Ca alloys with excellent biodegradation performance, JOM, 66, 566, 10.1007/s11837-014-0875-5 Ralston, 2010, Effect of grain size on corrosion: a review, Corrosion, 66, 075005, 10.5006/1.3462912 Mostaed, 2014, Influence of ECAP process on mechanical and corrosion properties of pure Mg and ZK60 magnesium alloy for biodegradable stent applications, Biomatter, 4, e28283, 10.4161/biom.28283 Jiang, 2016, Biodegradable behaviors of ultrafine-grained ZE41A magnesium alloy in DMEM solution, Metals, 6, 3, 10.3390/met6010003 Ratna Sunil, 2016, In vitro and in vivo studies of biodegradable fine grained AZ31 magnesium alloy produced by equal channel angular pressing, Mater Sci Eng C, 59, 356, 10.1016/j.msec.2015.10.028 Miskovic, 2016, Examining the elemental contribution towards the biodegradation of Mg-Zn-Ca ternary metallic glasses, J Mater Chem B, 4, 2679, 10.1039/C6TB00342G Hornberger, 2012, Biomedical coatings on magnesium alloys - a review, Acta Biomater, 8, 2442, 10.1016/j.actbio.2012.04.012 Shadanbaz, 2012, Calcium phosphate coatings on magnesium alloys for biomedical applications: a review, Acta Biomater, 8, 20, 10.1016/j.actbio.2011.10.016 Wu, 2013, Surface design of biodegradable magnesium alloys — a review, Surf Coat Tech, 233, 2, 10.1016/j.surfcoat.2012.10.009 Agarwal, 2016, Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications, Mater Sci Eng C, 68, 948, 10.1016/j.msec.2016.06.020 Yang, 2015, In vitro study of polycaprolactone/bioactive glass composite coatings on corrosion and bioactivity of pure Mg, Appl Surf Sci, 355, 832, 10.1016/j.apsusc.2015.07.053 Townsend, 2002 Eriksson, 1993, A laboratory study of corrosion reactions on statue bronze, Corros Sci, 34, 1083, 10.1016/0010-938X(93)90290-W Strandberg, 1997, The atmospheric corrosion of statue bronzes exposed to SO2 and NO2, Mater Corr, 48, 721 Niklasson, 2008, Air pollutant concentrations and atmospheric corrosion of organ pipes in european church environments, Stud Conserv, 53, 24 Tidblad, 2012, Atmospheric corrosion of metals in 2010–2039 and 2070–2099, Atmos Env, 55, 1, 10.1016/j.atmosenv.2012.02.081 Strandberg, 1998, Some aspects of the atmospheric corrosion of copper in the presence of sodium chloride, J Electrochem Soc, 145, 1093, 10.1149/1.1838422 Lindstrom, 2003, The influence of NaNO3 on the atmospheric corrosion of zinc, J Electrochem Soc, 150, B583, 10.1149/1.1627348 Inoue, 2002, Corrosion rate of magnesium and its alloys in buffered chloride solutions, Corros Sci, 44, 603, 10.1016/S0010-938X(01)00092-0 Baril, 2001, AC impedance spectroscopy in characterizing time-dependent corrosion of AZ91 and AM50 magnesium alloys characterization with respect to their microstructures, J Electrochem Soc, 148, B489, 10.1149/1.1415722 Pardo, 2008, Corrosion behaviour of magnesium/aluminium alloys in 3.5wt.% NaCl, Corros Sci, 50, 823, 10.1016/j.corsci.2007.11.005 Wang, 2010, Corrosion behavior of Mg, AZ31, and AZ91 alloys in dilute NaCl solutions, J Solid State Electr, 14, 1897, 10.1007/s10008-010-1020-1 Cheng, 2009, Comparison of corrosion behaviors of AZ31, AZ91, AM60 and ZK60 magnesium alloys, Trans Nonferrous Met Soc China, 19, 517, 10.1016/S1003-6326(08)60305-2 Abidin, 2011, Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37°C, Corros Sci, 53, 3542, 10.1016/j.corsci.2011.06.030 Song, 1998, Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride, Corros Sci, 40, 1769, 10.1016/S0010-938X(98)00078-X Arrabal, 2012, Effect of Nd on the corrosion behaviour of AM50 and AZ91D magnesium alloys in 3.5wt.% NaCl solution, Corros Sci, 55, 301, 10.1016/j.corsci.2011.10.033 Abady, 2010, Effect of Al content on the corrosion behavior of Mg–Al alloys in aqueous solutions of different pH, Electrochim Acta, 55, 6651, 10.1016/j.electacta.2010.06.007 Udhayan, 1996, On the corrosion behaviour of magnesium and its alloys using electrochemical techniques, J Power Sources, 63, 103, 10.1016/S0378-7753(96)02456-1 Singh, 2015, A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution, J Magnes Alloys, 3, 142, 10.1016/j.jma.2015.02.004 El Shaye, 2011, Corrosion behaviour of pure Mg, AS31 and AZ91 in buffered and unbuffered sulphate and chloride solutions, Corros Eng Sci Technol, 46, 481, 10.1179/147842209X12520554108992 Shi, 2005, Influence of the b phase on the corrosion performance of anodised coatings on Mg–aluminium alloys, Corros Sci, 47, 2760, 10.1016/j.corsci.2004.11.004 Godard, 1967 Hui, 1994, Composition and microstructure of corrosion products of aluminum and MA2-1 magnesium alloy in the wet tropical climate of Vietnam, Prot Met, 30, 506 Arrabal, 2012, Corrosion behaviour of AZ91D and AM50 Mg alloys with Nd and Gd additions in humid environments, Corros Sci, 55, 351, 10.1016/j.corsci.2011.10.038 Wright, 1995 Santos, 2011, Chemical composition of rainwater at a coastal town on the southwest of Europe: what changes in 20 years?, Sci Total Environ, 409, 3548, 10.1016/j.scitotenv.2011.05.031 Phipps PBP, Rice DW. Role of water in atmospheric corrosion. In: ACS symposium series, vol. 89; 1979. p. 235–41. Kirk, 1995 Davila, 2010, Hygroscopic salts and the potential for life on mars, Astrobiology, 10, 617, 10.1089/ast.2009.0421 Wadsö, 2009, An improved method to validate the relative humidity generation in sorption balances, Eur J Pharm Biopharm, 72, 99, 10.1016/j.ejpb.2008.10.013 Lindstrom, 2002, The influence of salt deposits on the atmospheric corrosion of zinc. the important role of the sodium ion, J Electrochem Soc, 149, B57, 10.1149/1.1432670 Johansson, 1981, The atmospheric corrosion of unprotected carbon steel – a comparison between field study and laboratory test, Mater Corr, 32, 265 Strandberg, 1995, Structure of Cu2.5(OH)3SO4.2H2O - a novel corrosion product of copper, Acta Chemica Scand, 49, 5, 10.3891/acta.chem.scand.49-0005 Blucher, 2001, The effect of CO2 on the NaCl-induced atmospheric corrosion of aluminum, J Electrochem Soc, 148, B127, 10.1149/1.1354614 Lindstrom, 2003, The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91, Mater Corr, 54, 587, 10.1002/maco.200390130 Hasenberg, 1991 Svensson, 1995, Sulfidation of zinc by traces of hydrogen-sulfide in air, J Electrochem Soc, 142, 1484, 10.1149/1.2048601 Svensson, 1996, The synergistic effect of hydrogen sulfide and nitrogen dioxide on the atmospheric corrosion of zinc, J Electrochem Soc, 143, 51, 10.1149/1.1836386 Svensson, 1996, The temperature-dependence of the SO2-induced atmospheric corrosion of zinc. A laboratory study, Corros Sci, 38, 2225, 10.1016/S0010-938X(96)00086-8 Strandberg, 1997, The formation of black patina on copper in humid air containing traces of SO2, J Electrochem Soc, 144, 81, 10.1149/1.1837368 Blücher, 2005 Esmaily, 2015 Graedel, 1987, Copper patinas formed in the atmosphere - II. A qualitative assessment of mechanisms, Corros Sci, 27, 721, 10.1016/0010-938X(87)90053-9 Finlayson-Pitts, 1986 Zarrouk, 2010, The effect of temperature on the corrosion of Cu/HNO3 in the presence of organic inhibitor: part-2, Int J Electrochem Sci, 5, 1516 Blücher, 2003, The NaCl-induced atmospheric corrosion of aluminum-The influence of carbon dioxide and temperature, J Electrochem Soc, 150, B93, 10.1149/1.1545456 Vázquez, 2016 Liang, 2010, Effects of sodium chloride particles, Ozone, UV, and relative humidity on atmospheric corrosion of silver, J Electrochem Soc, 157, C146, 10.1149/1.3310812 Thompson, 2007, Accelerated corrosion of zinc alloys exposed to ultraviolet light, Corros Eng Sci Techn, 2, 237, 10.1179/174327807X214581 Frankel, 1998, Pitting corrosion of metals: a review of the critical factors, J Electrochem Soc, 145, 2186, 10.1149/1.1838615 Kruger, 1988, Passivity of metals - a materials science perspective, Int Mater Rev, 33, 113, 10.1179/imr.1988.33.1.113 Strehblow, 2002 Falk, 1998, The role of carbon dioxide in the atmospheric corrosion of zinc, J Electrochem Soc, 145, 39, 10.1149/1.1838207 Lindstrom, 2004, Corrosion of magnesium in humid air, Corros Sci, 46, 1141, 10.1016/j.corsci.2003.09.010 Werner, 2014, Flue gas CO2 mineralization using thermally activated serpentine: from single- to double-step carbonation, Phys Chem Chem Phys, 16, 24978, 10.1039/C4CP02786H White, 1997, Thermodynamic equilibrium, kinetics, activation barriers, and reaction mechanisms for chemical reactions in Karst Terrains, Environ Geol, 30, 46, 10.1007/s002540050131 Chen, 2005, In situ studies of the effect of CO2 on the initial NaCl-induced atmospheric corrosion of copper, J Electrochem Soc, 152, B342, 10.1149/1.1984448 Chen, 2007, AC impedance spectroscopy study of the corrosion behavior of an AZ91 magnesium alloy in 0.1mol/L sodium sulfate solution, Electrochim Acta, 52, 3299, 10.1016/j.electacta.2006.10.007 Yang, 2010, Corrosion behaviour of die-cast AZ91D magnesium alloy in aqueous sulphate solutions, Corros Sci, 52, 345, 10.1016/j.corsci.2009.09.020 Yun, 2011, Corrosion behaviour of die-cast AZ91D magnesium alloys in sodium sulphate solutions with different pH values, Trans Nanferrous Met Soc China, 21, 912, 10.1016/S1003-6326(11)60801-7 Barin, 2008 Esmaily M, Svensson JE, Johansson LG. Corrosion of Mg-aluminum (Mg-Al) alloys – an interplay between Al content and CO2. Magnes Technol 2017;397–403 [The Minerals, Metals & Materials]. Evans, 2015 Duan, 2006 Mathieu, 2003, A corrosion study of the main constituent phases of AZ91 magnesium alloys, Corros Sci, 45, 2741, 10.1016/S0010-938X(03)00109-4 Baliga, 1993, Development of corrosion resistant magnesium alloys. Part 2. Structure of corrosion products on rapidly solidified Mg–16Al alloys, Mater Sci Technol, 9, 513, 10.1179/mst.1993.9.6.513 Leggat, 2002, Performance of hydrotalcite conversion treatments on AA2024-T3 when used in a coating system, Corrosion, 58, 322, 10.5006/1.3287681 Zheludkevich, 2010, Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibitor, Corros Sci, 52, 602, 10.1016/j.corsci.2009.10.020 Zhang, 2008, Fabrication of oriented layered double hydroxide films by spin coating and their use in corrosion protection, Chem Eng J, 141, 362, 10.1016/j.cej.2008.03.016 Hang, 2012, Layered double hydroxides as containers of inhibitors in organic coatings for corrosion protection of carbon steel, Prog Org Coat, 74, 343, 10.1016/j.porgcoat.2011.10.020 Fan, 2014, Catalytic applications of layered double hydroxides: recent advances and perspectives, Chem Soc Rev, 43, 7040, 10.1039/C4CS00160E Liu, 2006, Synthesis, anion exchange, and delamination of Co-Al layered double hydroxide: assembly of the exfoliated nanosheet/polyanion composite films and magneto-optical studies, J Am Chem Soc, 128, 4872, 10.1021/ja0584471 Lindgren, 2013, Impact of additives on zirconium oxidation by water: mechanistic insights from first principles, RSC Adv, 3, 21613, 10.1039/c3ra42941e Lindgren, 2014, Confinement dependence of electro-catalysts for hydrogen evolution from water splitting, Beilstein J Nanotechnol, 5, 195, 10.3762/bjnano.5.21 Lindgren, 2017, Oxygen vacancy formation, mobility, and hydrogen pick-up during oxidation of zirconium by water, Oxid Met, 87, 355, 10.1007/s11085-016-9695-z LeBozec, 2015, Influence of test parameters in an automotive cyclic test on the corrosion and mechanical performance of joined materials, Mater Corros, 66, 1051, 10.1002/maco.201408160 Chen, 2015, Investigation of effect of geometry design on the galvanic corrosion of magnesium component, Mater Corros, 66, 949, 10.1002/maco.201407881 Jia, 2006, Influence of geometry on galvanic corrosion of AZ91D coupled to steel, Corros Sci, 48, 2133, 10.1016/j.corsci.2005.08.013 Baron-Wiecheć, 2013, Plasma electrolytic oxidation of coupled light metals, Trans IMF, 91, 107, 10.1179/0020296712Z.00000000083 Kish, 2015 Hillis, 1987, Finishing alternatives for high purity magnesium alloys Cao, 2013, Corrosion of ultra-high-purity magnesium in 3.5% NaCl solution saturated with Mg(OH)2, Corros Sci, 75, 78, 10.1016/j.corsci.2013.05.018 Südholz, 2009, Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions, J Alloys Compd, 471, 109, 10.1016/j.jallcom.2008.03.128 Esmaily, 2015, Effect of rheocasting on corrosion of AM50 magnesium alloy, J Electrochem Soc, 162, C85, 10.1149/2.0331503jes Aung, 2002, Effect of heat treatment on corrosion and electrochemical behaviour of AZ91D magnesium alloy, J Appl Electrochem, 32, 1397, 10.1023/A:1022698916817 Li, 2016, Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5wt.% sodium chloride solution, Corros Sci, 111, 288, 10.1016/j.corsci.2016.05.019 Arrabal, 2011, Corrosion behaviour of Mg/Al alloys in high humidity atmospheres, Mater Corros, 62, 326, 10.1002/maco.200905538 Pardo, 2008, Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media, Electrochim Acta, 53, 7890, 10.1016/j.electacta.2008.06.001 Gray, 2002, Protective coatings on magnesium and its alloys – a critical review, J Alloys Compd, 336, 88, 10.1016/S0925-8388(01)01899-0 ASTM D1732–03(2013). Standard practices for preparation of magnesium alloy surfaces for painting, ASTM International; 2013. Niu, 2006, A study and application of zinc phosphate coating on AZ91D magnesium alloy, Surf Coat Technol, 200, 3021, 10.1016/j.surfcoat.2004.10.119 Zhao, 2006, A chromium-free conversion coating of magnesium alloy by a phosphate–permanganate solution, Surf Coat Technol, 200, 5407, 10.1016/j.surfcoat.2005.07.064 Zhao, 2006, Microstructure and corrosion resistance of a chromium-free multi-elements complex coating on AZ91D magnesium alloy, Mater Chem Phys, 99, 54, 10.1016/j.matchemphys.2005.08.078 Ardelean, 2008, Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings, Corros Sci, 50, 1907, 10.1016/j.corsci.2008.03.015 AIMT. MAGPASS-COAT® Chrome-free passivation of Mg-based materials; 2016. Lin, 2006, Formation and properties of stannate conversion coatings on AZ61 magnesium alloys, Corros Sci, 48, 93, 10.1016/j.corsci.2004.11.023 Yang, 2012, Formation mechanism and properties of titanate conversion coating on AZ31 magnesium alloy, J Electrochem Soc, 159, C226, 10.1149/2.091205jes Chen, 2013, 282 REACH. Regulation (EC) No 1907/2006 of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency. AMS2473H standard. Chemical film treatment for aluminum alloys, general purpose coating. SAE International; 2013. Kurze, 2006, Corrosion and surface protections DOW MAGNESIUM, Operations in Magnesium Finishing, The Dow Chemical Company, 1990. Evangelides HA. Method of electrolytically coating magnesium and electrolyte therefor. US 2723952 A; 1955. Bartak DE, Lemieux BE, Woolsey ER. Hard anodic coating for magnesium alloys. US 5470664 A;1995. Schmeling EL, Roschenbleck B, Weidemann MH. Method of producing protective coatings that are resistant to corrosion and wear on magnesium and magnesium alloys. US 4978432A; 1990. Barton TF. Anodization of magnesium and magnesium based alloys. US 5792335A; 1998. Pozzoli AS, Strazzi E. Multivalent electrolytic process for the surface treatment of non ferrous metallic material. EP 1793019 A2; 2007. Samsonov VI, Shatrov AS. Process and device for forming ceramic coatings on metals and alloys, and coatings produced by this process. EP 1488024 A2; 2004. Arrabal, 2009, Characterization of AC PEO coatings on magnesium alloys, Surf Coat Technol, 203, 2207, 10.1016/j.surfcoat.2009.02.011 Lu, 2016, Plasma electrolytic oxidation coatings with particle additions – a review, Surf Coat Technol, 307, 1165, 10.1016/j.surfcoat.2016.08.055 Gnedenkov, 2016, Localized corrosion of the magnesium alloys with inhibitor-containing coatings: SVET and SIET studies, Corros Sci, 102, 269, 10.1016/j.corsci.2015.10.015 Sun, 2016, Self-healing plasma electrolytic oxidation coatings doped with benzotriazole loaded halloysite nanotubes on AM50 magnesium alloy, Corros Sci, 111, 753, 10.1016/j.corsci.2016.06.016 Němcová, 2016, Film growth and alloy enrichment during anodizing AZ31 magnesium alloy in fluoride/glycerol electrolytes of a range of water contents, Electrochim Acta, 219, 28, 10.1016/j.electacta.2016.09.089 Schneider, 2016, Corrosion protection of thickness reduced plasma electrolytic layers on AZ31, Mater Corros, 67, 921, 10.1002/maco.201508763