Modeling and analysis of combustion assisted thermal spray processes

Goward, 1986, Protective coatings—purpose, role and design, Materials Science and Technology, 2, 194, 10.1179/mst.1986.2.3.194 Meadowcroft, 1987, High temperature corrosion alloys and coatings in oil- and coal-fired boilers, Materials Science and Engineering, 88, 313, 10.1016/0025-5416(87)90100-5 Wang, 1996, The dependence of erosion.corrosion wastage on carbide/metal binder proportion for HVOF carbide metal cermet coatings, Wear, 196, 141, 10.1016/0043-1648(95)06883-X Wang, 1994, The erosion–oxidation behavior of HVOF Cr3C2-NiCr cermet coating, Wear, 174, 177, 10.1016/0043-1648(94)90100-7 Bjordal, 1995, Combined erosion and corrosion of thermal sprayed WC and CrC coatings, Surface and Coatings Technology, 70, 215, 10.1016/0257-8972(94)02266-S Dolatabadi, 2003, Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel (HVOF) spray process, Journal of Materials Processing Technology, 137, 214, 10.1016/S0924-0136(02)01084-1 Lau, 1998, Thermal spraying of nanocrystalline Ni coatings, Physica Status Solidi A – Applied Research, 166, 257, 10.1002/(SICI)1521-396X(199803)166:1<257::AID-PSSA257>3.0.CO;2-J Branagan, 2001, Wear-resistant amorphous and nanocomposite steel coatings, Metallurgical and Materials Transactions A, 32, 2615, 10.1007/s11661-001-0051-8 Cheng, 2001, A numerical study of high-velocity oxygen fuel thermal spraying process. Part I: Gas phase dynamics, Metallurgical and Materials Transactions A, 32, 1609, 10.1007/s11661-001-0139-1 Lau, 1999, Particle behavior of nanocrystalline 316-stainless steel during high velocity oxy-fuel thermal spray, Nano-Structured Materials, 12, 319, 10.1016/S0965-9773(99)00126-9 Sobolev, 1998, Modeling of the In-flight behavior of stainless steel powder particles in high velocity oxy-fuel spraying, Journal of Materials Processing Technology, 79, 213, 10.1016/S0924-0136(98)00013-2 Ahmed, 2001, In-flight oxidation of composite powder particles during thermal spraying, International Journal of Heat and Mass Transfer, 44, 4667, 10.1016/S0017-9310(01)00093-X Li, 2003, Modeling and analysis of HVOF thermal spray process accounting for powder size distribution, Chemical Engineering Science, 58, 849, 10.1016/S0009-2509(02)00616-4 Knotek, 1987, Monte Carlo simulation of the lamellar structure of thermally sprayed coatings, Surface and Coatings Technology, 32, 261, 10.1016/0257-8972(87)90112-5 Trapaga, 1991, Mathematical modeling of the isothermal impingement of liquid droplets in spray processes, Metallurgical and Materials Transactions B, 22, 901, 10.1007/BF02651166 Knotek, 1987, Monte Carlo simulation of the lamellar structure of thermally sprayed coatings, Surface and Coatings Technology, 32, 261, 10.1016/0257-8972(87)90112-5 Mostaghimi, 2003, Modeling thermal spray coating processes: A powerful tool in design and optimization, Surface and Coatings Technology, 163–164, 1, 10.1016/S0257-8972(02)00686-2 Kamnis, 2005, Numerical modelling of droplet impingement, Journal of Physics D: Applied Physics, 38, 3664, 10.1088/0022-3727/38/19/015 Magnussen, 1976, On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion, Proceedings of the Combustion Institute, 16, 719, 10.1016/S0082-0784(77)80366-4 Cheng, 2001, The effect of particle size and morphology on the in-flight behavior of particles during high velocity oxy-fuel (HVOF) thermal spraying, Metallurgical and Materials Transactions B, 32, 525, 10.1007/s11663-001-0037-3 Ranz, 1952, Evaporation from drops: Part 1, Chemical Engineering Progress, 48, 141