Analysis of transverse loading for laminated cylindrical pipes

Cheng, 1973, On an accurate theory for circular cylindrical shells, ASME J Appl Mech, 40, 583, 10.1115/1.3423028 Cheng, 1984, Theory of orthotropic and composite cylindrical shells, accurate and simple fourth-order governing equations, ASME J Appl Mech, 51, 736, 10.1115/1.3167718 Jones, 1998, Approximate solution to the orthoropic pinched cylinder problem, Compos Struct, 42, 73, 10.1016/S0263-8223(97)00005-6 Hamada, 1992, Comparison of energy absorption of carbon/epoxy and carbon/PEEK composite tubes, Composites, 23, 245, 10.1016/0010-4361(92)90184-V Katayama T, Imadegawa K, Hirai T. Analysis of fracture mechanism of FW ring under impact load. In: Proceedings of the 71st JSME Fall Annual Meeting, vol. 930-63A; 1993. p. 106–08 [in Japanese] Hirai, 1986, Fracture behavior under impact lateral compression in filament-wound composites, J Soc Mater Sci Jpn, 35, 515, 10.2472/jsms.35.515 Tandon, 1997, Failure modes in unidirectional composites under transverse loading, J Rein Plas Comp, 16, 33, 10.1177/073168449701600104 Alderson, 1992, Failure mechanisms during the transverse loading of filament-wound pipes under static and low velocity impact conditions, Composites, 23, 167, 10.1016/0010-4361(92)90437-Y Nishiwaki, 1995, A quasi-three-dimensional lateral compressive analysis method for a composite cylinder, Compos Struct, 32, 293, 10.1016/0263-8223(95)00029-1 Greszczuk LB. Theoretical and experimental studies on properties and behavior of filamentary composites. In: Proceedings of the 21st Annual Meeting of S.P.I., Sec. 8-A no. 2; 1966