Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

Chandran, 1990, Fluidized bed drying of solids, A.I.Ch.E. Journal, 36, 29, 10.1002/aic.690360106 Chen, 1989, A mathematical model of drying processes, International Journal of Heat and Mass Transfer, 32, 297, 10.1016/0017-9310(89)90177-4 Drouzas, 1999, Microwave/vacuum drying of model fruit gels, Journal of Food Engineering, 39, 117, 10.1016/S0260-8774(98)00133-2 Ergun, 1952, Fluid flow through packed columns, Chemical Engineering Progress, 48, 89 Kozanoglu, 2002, Drying of solids in vacuum fluidized bed, Canadian Journal of Chemical Engineering, 80, 376, 10.1002/cjce.5450800306 Kusakabe, 1989, Fluidization of fine particles at reduced pressure, Powder Technology, 58, 125, 10.1016/0032-5910(89)80024-5 Llop, 1996, Fluidization at vacuum conditions, A generalized equation for the prediction of minimum fluidization velocity. Chemical Engineering Science, 51, 5149 Mawatari, 2003, Characteristics of vibro-fluidization for fine powder under reduced pressure, Advanced Powder Technology, 14, 559, 10.1163/156855203322448345 Mawatari, 2004, Minimum bubbling velocity and homogeneous fluidization region under reduced pressure for group-A powders, Journal of Chemical Engineering of Japan, 37, 89, 10.1252/jcej.37.89 Montgomery, 1998, Vacuum assisted drying of hydrophilic plates: static drying experiments, International Journal of Heat and Mass Transfer, 41, 735, 10.1016/S0017-9310(97)00163-4 Nakagawa, 1992, Continuous drying on a fine particles—water slurry in a powder–particle fluidized bed, Journal of Chemical Engineering of Japan, 25, 495, 10.1252/jcej.25.495 Nakamura, 1971, A condensation on drying rate of porous solids, Kagaku Kogaku, 35, 1122, 10.1252/kakoronbunshu1953.35.1122 Noda, 1994, Plasma treatment of particles in a fluidized bed under reduced pressure, Kagaku Kogaku Ronbunshu, 20, 21, 10.1252/kakoronbunshu.20.21 Pere, 2002, Microwave vacuum drying of porous media: experimental study and qualitative considerations of internal transfers, Chemical Engineering and Processing, 41, 427, 10.1016/S0255-2701(01)00161-1 Shirai, 1965, Heat and mass transfer on the surface of solid spheres fixed within fluidized beds, Kagaku Kogaku, 29, 880, 10.1252/kakoronbunshu1953.29.880 Sugiyama, 1974, Effects of surface resistances on simultaneous heat and mass transfer in porous solids with phase change, International Journal of Heat and Mass Transfer, 17, 899, 10.1016/0017-9310(74)90157-4 Tatemoto, 2001, Effect of fluidizing particle on drying characteristics of porous material in fluidized bed, Drying Technology, 19, 1305, 10.1081/DRT-100105290 Tatemoto, 2002, Effect of motion of drying materials in fluidized bed on drying characteristics, Journal of Chemical Engineering of Japan, 35, 753, 10.1252/jcej.35.753 Tatemoto, 2004, Mechanism of temperature decrement of porous materials in immersed fluidized bed in drying, Journal of Chemical Engineering of Japan, 37, 89, 10.1252/jcej.37.875 Tatemoto, 2005, Drying characteristics of porous materials in a fluidized bed under reduced pressure, Drying Technology, 23, 1257, 10.1081/DRT-200059493 Tatemoto, 2005, Drying characteristics of porous materials in superheated steam fluidized bed under reduced pressure, Journal of Chemical Engineering of Japan, 38, 983, 10.1252/jcej.38.983 Tatemoto, 2005, Drying characteristics of porous materials in a fluidized bed of hygroscopic porous particles, Journal of Chemical Engineering of Japan, 38, 976, 10.1252/jcej.38.976 Toei, 1965, Analysis of drying rate of the bed of granular and powdered materials during the falling rate period, Kagaku Kogaku, 29, 771, 10.1252/kakoronbunshu1953.29.771 Tsukada, 1992, Maximum heat-transfer coefficient for an immersed body in a bubbling fluidized bed, Industrial and Engineering Chemistry Research, 31, 1147, 10.1021/ie00004a025 Wang, 2000, Heat and mass transfer in batch fluidized-bed drying of porous particles, Chemical Engineering Science, 55, 1857, 10.1016/S0009-2509(99)00446-7 Ziegler, 1964, Mechanism of heat transfer to a fixed surface in a fluidized bed, Industrial and Engineering Chemistry, Fundamentals, 3, 94, 10.1021/i160010a002