Surface modification by electrical discharge machining: A review

Abu Zeid, 1997, On the effect of electrodischarge machining parameters on the fatigue life of AISI D6 tool steel, Journal of Materials Processing Technology, 68, 27, 10.1016/S0924-0136(96)02523-X Ahmad, 2006, A study on machining parameters of guided micro-EDM tool with focus on minimizing spark gap, 869 Altan, 1993, Advanced techniques for Die and Mold manufacturing, Annals of the CIRP, 42, 707, 10.1016/S0007-8506(07)62533-5 Aspinwall, 2003, Electrical discharge surface alloying of Ti and Fe workpiece materials using refractory powder compact electrodes and Cu wire, Annals of the CIRP, 52, 151, 10.1016/S0007-8506(07)60553-8 Bai, 2006, Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy Haynes 230 with Al–Mo composite electrode, Surface & Coatings Technology, 200, 4127, 10.1016/j.surfcoat.2005.03.022 Barash, 1965, Experiments with electric spark toughening, International Journal of Machine Tool Design & Research, 4, 1, 10.1016/0020-7357(64)90005-8 Bruyn, 1968, Slope control—a great improvement in spark erosion, Annals of the CIRP, 16, 183 Cao, 2005, Instantaneous fabrication of tungsten micro-electrode based on single electrical discharge, Journal of Materials Processing Technology, 168, 83, 10.1016/j.jmatprotec.2004.11.007 Chen, 2008, Surface modification using semi-sintered electrodes on electrical discharge machining, International Journal of Advanced Manufacturing Technology, 36, 490, 10.1007/s00170-006-0859-x Crookall, 1971, Electro-discharge machining—the state of the art, Annals of the CIRP, 20, 113 Curodeau, 2005, New EDM polishing and texturing process with conductive polymer electrodes, Journal of Materials Processing Technology, 159, 17, 10.1016/j.jmatprotec.2003.11.004 Eubank, 1993, Theoretical model of the electrical discharge machining process – III, the variable mass, cylindrical plasma model, Journal of Applied Physics, 73, 7900, 10.1063/1.353942 Fredriksson, 1995, Influence of dielectric temperature in EDM of hot worked tool steel, Surface Engineering, 11, 324, 10.1179/sur.1995.11.4.324 Fuller, 1996, Electrical Discharge Machining, vol. 16 Furutani, 2001, Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid, Precision Engineering, 25, 138, 10.1016/S0141-6359(00)00068-4 Furutani, 2003, Experimental analysis of deposition process of lubricant surface by EDM with molybdenum disulphide powder suspended in working oil, Proceedings of the American Society for Precision Engineering, 30, 547 Gangadhar, 1991, Surface modification in electrodischarge processing with powder compact tool electrode, Wear, 143, 45, 10.1016/0043-1648(91)90084-8 Ho, 2003, State of the art electrical discharge machining, International Journal of Machine Tools & Manufacture, 43, 1287, 10.1016/S0890-6955(03)00162-7 Jameson, 2001 Jeswani, 1976, Electron microprobe study of deposition and diffusion of tool material in electrical discharge machining, International Journal of Production Research, 17, 1, 10.1080/00207547908919590 Jeswani, 1981, Effect of addition of graphite powder to kerosene used as a dielectric fluid in electrical discharge machining, Wear, 70, 133, 10.1016/0043-1648(81)90148-4 Kansal, 2005, Application of Taguchi method for optimization of powder mixed electric discharge machining, International Journal of Management and Manufacturing Technology, 7, 329, 10.1504/IJMTM.2005.006836 Klocke, 2004, The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies, Journal of Material Processing Technology, 149, 191, 10.1016/j.jmatprotec.2003.10.036 Koshy, 1983, Hardening of surface layers using electric discharge techniques, 315 Kozak, 2003, Study of electrical discharge machining using powder-suspended working media, Journal of Engineering Manufacture, Proceedings of the Instrumental Mechanic Engineers, 217, 1597, 10.1243/095440503771909971 Kruth, 1995, Rapid prototyping, a new application of physical and chemical processes for material accretion manufacturing, Proceedings of the ISEM-XI, 3 Kruth, 1995, Study on the white layer of a surface machined by die sinking electro-discharge machining, Annals of the CIRP, 44, 169, 10.1016/S0007-8506(07)62299-9 Kruth, 1998, Surface and sub-surface quality in material removal process for tool making, Proceedings of the ISEM-12, 33 Kunieda, 1997, Electric discharge machining in gas, Annals of the CIRP, 46, 143, 10.1016/S0007-8506(07)60794-X Kuneida, 2005, Advancing EDM through fundamental insight into the process, Annals of CIRP, 54, 599 Kuppan, 2006, Experimental investigation into electrical discharge deep hole drilling of Inconel 718 using graphite electrode, 923 Lahiri, 1981, Loss of energy in pyrolysis of dielectric in EDM process, Journal of Institution of Engineers (I), 62, 66 Lazarenko, B.R., 1943. To invert the effect of wear on electric power contacts. Dissertation of The All-Union Institute for Electro Technique in Moscow/CCCP (in Russian). Lee, 2004, Electrical discharge surface alloying, Journal of Materials Processing Technology, 149, 334, 10.1016/j.jmatprotec.2003.11.049 Lee, 1988, Quantification of surface damage of tool steels after EDM, International Journal of Machinery Tools & Manufacture, 28, 359, 10.1016/0890-6955(88)90050-8 Levy, 1975, Planetary spark erosion—applications and optimization, 291 Li, 2001, EDM performance of TiC/copper based sintered electrodes, Materials and Design, 22, 669, 10.1016/S0261-3069(01)00010-3 Lin, 2001, Surface improvement using a combination of electrical discharge machining with ball burnish machining based on the Taguchi method, International Journal of Advanced Manufacturing Technology, 18, 673, 10.1007/s001700170028 Lin, 2001, Surface modification of Al–Zn–Mg aluminum alloy using the combined process of EDM with USM, Journal of Materials Processing Technology, 115, 359, 10.1016/S0924-0136(01)01017-2 Marafona, 2000, A new method of optimizing material removal rate using EDM with copper tungsten electrodes, International Journal of Machine Tools & Manufacture, 40, 153, 10.1016/S0890-6955(99)00062-0 McGeough, 1988 Miyake, 1998, Improvement of tool life through surface modification by electrical discharge machining, Proceedings of the ISEM-12, 261 Miyazaki, 1995, Surface modification of steel by a small diameter plasma arc, Annals of CIRP, 44, 161, 10.1016/S0007-8506(07)62297-5 Mohri, 1993, Metal surface modification by electrical discharge machining with composite electrodes, Annals of the CIRP, 42, 219, 10.1016/S0007-8506(07)62429-9 Mohri, 2000, A new process of additive and removal machining by EDM with a thin electrode, Annals of CIRP, 40, 123, 10.1016/S0007-8506(07)62910-2 Mohri, 2003, Layer generation process on workpiece in electrical discharge machining, Annals of the CIRP, 52, 157, 10.1016/S0007-8506(07)60554-X Moro, 2001, Surface modification process by electrical discharge machining with TiC semi-sintered electrode, Journal of Japanese Society of Precision Engineering, 67, 114, 10.2493/jjspe.67.114 Narumiya, 1989, EDM by powder suspended working fluid Okada, 2000, Formation of hard layer by EDM with carbon powder mixed fluid using titanium electrode, 464 Panda, 2006, Experimental investigation of relative erosion of electrodes in electrical discharge machining, 929 Pantelis, 1998, Investigation into application of electrodischarge machining as steel surface modification technique, Surface Engineering, 14, 55, 10.1179/sur.1998.14.1.55 Patel, 1989, Theoretical model of the electrical discharge machining process – II, the anode erosion model, Journal of Applied Physics, 66, 4104, 10.1063/1.343995 Patowari, 2006, Surface modification of C-40 steel using WC-Cu P/M green compact electrodes in EDM, 875 Pecas, 2003, Influence of silicon powder-mixed dielectric on conventional electrical discharge machining, International Journal of Machine Tools & Manufacture, 43, 1465, 10.1016/S0890-6955(03)00169-X Pecas, 2008, Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric, International Journal of Advanced Manufacturing Technology, 37, 1120, 10.1007/s00170-007-1061-5 Rehbein, 2004, Influence of selected groups of additives on breakdown in EDM sinking, Journal of Materials Processing Technology, 149, 58, 10.1016/j.jmatprotec.2004.02.029 Roethel, 1976, Contributions to the micro-analysis of spark eroded surfaces, Annals of the CIRP, 25, 135 Samuel, 1997, Powder metallurgy tool electrodes for electrical discharge machining, International Journal of Machine Tools & Manufacture, 37, 1625, 10.1016/S0890-6955(97)00006-0 Schumacher, 1983, EDM technology for precision workpieces with excellent surface quality, Proceedings of the ISEM-7, 124 Schumacher, 2004, After 60 years of EDM, the discharge process remains still disputed, Journal of Materials Processing Technology, 149, 376, 10.1016/j.jmatprotec.2003.11.060 Shankar, 1979, Polarity effect in spark erosion machining, Indian Journal of Technology, 17, 363 Shankar, 1997, Analysis of spark profiles during EDM process, Machinery Science & Technology, 1, 195, 10.1080/10940349708945647 Shunmugam, 1994, Improvement of wear resistance by EDM with tungsten carbide powder metallurgy electrode, Wear, 171, 1, 10.1016/0043-1648(94)90340-9 Simao, 2002, Surface alloying using PM composite electrode materials when electrical discharge texturing hardened AISI D2, Journal of Materials Processing Technology, 127, 211, 10.1016/S0924-0136(02)00144-9 Simao, 2003, Workpiece surface modification using electrical discharge machining, International Journal of Machine Tools & Manufacture, 43, 121, 10.1016/S0890-6955(02)00187-6 Singh, 2005, Parametric optimization of powder mixed electrical discharge machining by response surface methodology, Journal of Materials Processing Technology, 169, 427, 10.1016/j.jmatprotec.2005.03.028 Soni, 1995, Effect of Electrode Material Properties on Surface Roughness & Dimensional Accuracy in Electric Discharge Machining of High carbon High chromium Die Steel, Journal of Institution of Engineers (I) – PR, 76 Soni, 1996, Experimental investigation on migration of material during EDM of T 215 Cr12 die steel, Journal of Materials Processing Technology, 56, 439, 10.1016/0924-0136(95)01858-1 Toren, 1975, Melting and evaporation phenomena during electrical erosion, Transactions of ASME Journal of Heat Transfer, 97, 576, 10.1115/1.3450433 Tsai, 2003, EDM performance of Cr/Cu-based composite electrodes, International Journal of Machine Tools & Manufacture, 43, 245, 10.1016/S0890-6955(02)00238-9 Tsai, 2001, Predictions on surface finish in electrical discharge machining based upon neural network models, International Journal of Machine Tools & Manufacture, 41, 1385, 10.1016/S0890-6955(01)00028-1 Tsukahara, 2000, Surface hardening of titanium using EDM process, Titan Japan, 48, 47 Tsunekawa, 1994, Surface modification of aluminum by electrical discharge alloying, Materials Science and Engineering, A174, 193, 10.1016/0921-5093(94)91088-X Tzeng, 2005, Investigation into some surface characteristics of electrical discharge machined SKD-11 using powder-suspension dielectric oil, Journal of Materials Processing Technology, 170, 385, 10.1016/j.jmatprotec.2005.06.006 Tzeng, 2001, Effect of powder characteristics on electrodischarge machining efficiency, International Journal of Advanced Manufacturing Technology, 17, 586, 10.1007/s001700170142 Venkatesh, 1972, Surface transformation in high speed steel after electro discharge machining, 639 Wang, 2002, Surface modification process by electrical discharge machining with a Ti powder green compact electrode, Journal of Materials Processing Technology, 129, 139, 10.1016/S0924-0136(02)00597-6 Wong, 1995, Effect of flushing on electro-discharge machined surfaces, Journal of Materials Processing Technology, 48, 299, 10.1016/0924-0136(94)01662-K Wong, 1998, Near mirror-finish phenomenon in EDM using powder-mixed dielectric, Journal of Materials Processing Technology, 79, 30, 10.1016/S0924-0136(97)00450-0 Wu, 2005, Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric, International Journal of Machine Tools & Manufacture, 45, 1195, 10.1016/j.ijmachtools.2004.12.005 Yan, 2002, Surface modification of Al–Zn–Mg alloy by combined electrical discharge machining with ball burnish machining, International Journal of Machine Tools & Manufacture, 42, 925, 10.1016/S0890-6955(02)00026-3 Yan, 2005, The effect in EDM of a dielectric of a urea solution in water on modifying the surface of titanium, International Journal of Machine Tools & Manufacture, 45, 194, 10.1016/j.ijmachtools.2004.07.006 Zhao, 2002, The application of research on powder mixed EDM in rough machining, Journal of Materials Processing Technology, 129, 30, 10.1016/S0924-0136(02)00570-8 Zimanyi, 1975, Photometric determination of the spatial and chronological structure variations of the discharge by spark erosion metalworking, Annals of the CIRP, 24, 89