On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests

Wang, 2020, On crashworthiness design of hybrid metal-composite structures, Int. J. Mech. Sci., 171, 105380, 10.1016/j.ijmecsci.2019.105380 Chen, 2020, Quasi-static bending and transverse crushing behaviors for hat-shaped composite tubes made of CFRP, GFRP and their hybrid structures, Compos. Struct., 239, 111842, 10.1016/j.compstruct.2019.111842 Wang, 2020, A novel failure criterion based upon forming limit curve for thermoplastic composites, Compos. B Eng., 108320, 10.1016/j.compositesb.2020.108320 Sun, 2018, On fracture characteristics of adhesive joints with dissimilar materials – an experimental study using digital image correlation (DIC) technique, Compos. Struct., 201, 1056, 10.1016/j.compstruct.2018.06.018 Liu, 2019, Experimental study on residual properties of carbon fibre reinforced plastic (CFRP) and aluminum single-lap adhesive joints at different strain rates after transverse pre-impact, Compos. Appl. Sci. Manuf., 124, 105372, 10.1016/j.compositesa.2019.03.018 Liu, 2019, Failure mechanisms in carbon fiber reinforced plastics (CFRP)/aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension, Compos. B Eng., 172, 339, 10.1016/j.compositesb.2019.04.036 Petrie, 2011, How moisture affects adhesives, sealants, and coatings, Met. Finish., 109, 36, 10.1016/S0026-0576(13)70070-9 Alam, 2018, Tidal turbine blade composites - a review on the effects of hygrothermal aging on the properties of CFRP, Compos. B Eng., 149, 248, 10.1016/j.compositesb.2018.05.003 Budhe, 2017, An updated review of adhesively bonded joints in composite materials, Int. J. Adhesion Adhes., 72, 30, 10.1016/j.ijadhadh.2016.10.010 Kahraman, 2005, Moisture diffusion into aluminum powder-filled epoxy adhesive in sodium chloride solutions, Int. J. Adhesion Adhes., 25, 337, 10.1016/j.ijadhadh.2004.10.003 Lin, 2005, Moisture sorption–desorption–resorption characteristics and its effect on the mechanical behavior of the epoxy system, Polymer, 46, 11994, 10.1016/j.polymer.2005.10.002 Machado, 2019, Effect of hygrothermal aging on the quasi-static behaviour of CFRP joints varying the overlap length, Compos. Struct., 214, 451, 10.1016/j.compstruct.2019.02.035 Zhang, 2020, Effect of environment conditions on adhesive properties and material selection in composite bonded joints, Int. J. Adhesion Adhes., 96, 102302, 10.1016/j.ijadhadh.2018.12.001 Zhang, 2013, Durability of adhesively-bonded single lap–shear joints in accelerated hygrothermal exposure for automotive applications, Int. J. Adhesion Adhes., 44, 130, 10.1016/j.ijadhadh.2013.02.009 Zhang, 2015, Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure, Int. J. Adhesion Adhes., 56, 3, 10.1016/j.ijadhadh.2014.07.008 Korta, 2015, Experimental and numerical study on the effect of humidity-temperature cycling on structural multi-material adhesive joints, Compos. B Eng., 79, 621, 10.1016/j.compositesb.2015.05.020 Stazi, 2015, Environmental ageing on GFRP pultruded joints: comparison between different adhesives, Compos. Struct., 133, 404, 10.1016/j.compstruct.2015.07.067 Sousa, 2019, Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing, Compos. B Eng., 158, 475, 10.1016/j.compositesb.2018.09.060 Liu, 2016, An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates, Compos. B Eng., 91, 431, 10.1016/j.compositesb.2016.01.051 Mu, 2019, Effect of alternating load on the residual strength of environmentally aged adhesively bonded CFRP-aluminum alloy joints, Compos. B Eng., 168, 87, 10.1016/j.compositesb.2018.12.070 Jiang, 2015, Experimental investigation on mechanical behaviour of FRP-to-steel adhesively-bonded joint under combined loading – Part 2: after hygrothermal ageing, Compos. Struct., 125, 687, 10.1016/j.compstruct.2014.12.040 Mariam, 2019, Influence of hydrothermal ageing on the mechanical properties of an adhesively bonded joint with different adherends, Compos. B Eng., 165, 572, 10.1016/j.compositesb.2019.02.032 2001 2001 Bordes, 2009, Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water, Int. J. Adhesion Adhes., 29, 595, 10.1016/j.ijadhadh.2009.02.013 Han, 2018, Characterisation of moisture diffusion and strength degradation in an epoxy-based structural adhesive considering a post-curing process, J. Adhes. Sci. Technol., 32, 1643, 10.1080/01694243.2018.1436876 2014 Carter, 1978, Langmuir-type model for anomalous moisture diffusion in composite resins, J. Compos. Mater., 12, 118, 10.1177/002199837801200201 Popineau, 2005, Free/bound water absorption in an epoxy adhesive, Polymer, 46, 10733, 10.1016/j.polymer.2005.09.008 Ameli, 2010, Hygrothermal properties of highly toughened epoxy adhesives, J. Adhes., 86, 698, 10.1080/00218464.2010.482405 Qin, 2018, Effect of continuous high temperature exposure on the adhesive strength of epoxy adhesive, CFRP and adhesively bonded CFRP-aluminum alloy joints, Compos. B Eng., 154, 43, 10.1016/j.compositesb.2018.07.059 Boubakri, 2009, Investigations on hygrothermal aging of thermoplastic polyurethane material, Mater. Des., 30, 3958, 10.1016/j.matdes.2009.05.038 Badawy, 1999, Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al–Cu in neutral aqueous solutions, Corrosion Sci., 41, 709, 10.1016/S0010-938X(98)00145-0 Robert, 1973, Some observations on the hydrous oxide film on aluminium immersed in warm water, Corrosion Sci., 13, 687, 10.1016/S0010-938X(73)80039-3 Gustafsson, 2011 Goglio, 2014, Moisture degradation of open-faced single lap joints, J. Adhes. Sci. Technol., 28, 1382, 10.1080/01694243.2012.697391 Real, 2006, Adhesive bonding of aluminium with structural acrylic adhesives: durability in wet environments, J. Adhes. Sci. Technol., 20, 1801, 10.1163/156856106779116614 Browne, 2017, Investigation of the corrosive properties of phase change materials in contact with metals and plastic, Renew. Energy, 108, 555, 10.1016/j.renene.2017.02.082 Zhu, 2011, Influence of voids on the tensile performance of carbon/epoxy fabric laminates, J. Mater. Sci. Technol., 27, 69, 10.1016/S1005-0302(11)60028-5 Muthirakkal, 2010, Hygrothermic behaviour of carbon/vinylester, glass/vinylester, carbon/epoxy and glass/epoxy composites, Iran. Polym. J. (Engl. Ed.), 19, 89 Guermazi, 2016, On the durability of FRP composites for aircraft structures in hygrothermal conditioning, Compos. B Eng., 85, 294, 10.1016/j.compositesb.2015.09.035 Brewis, 1982, The effect of moisture and temperature on the properties of an epoxide-polyamide adhesive in relation to its performance in single lap joints, Int. J. Adhesion Adhes., 2, 215, 10.1016/0143-7496(82)90028-8 Saleema, 2012, A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications, Appl. Surf. Sci., 261, 742, 10.1016/j.apsusc.2012.08.091 2019 Baldan, 2004, Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment, J. Mater. Sci., 39, 1, 10.1023/B:JMSC.0000007726.58758.e4