Design and evaluation of tribological coatings

Blomberg, 1994, Wear mechanisms and tribo mapping of Al2O3 and SiC in dry sliding, Wear, 171, 77, 10.1016/0043-1648(94)90350-6 S. Hogmark, S. Jacobson, O. Vingsbo, in: Friction Lubrication and Wear Technology, ASM Handbook, Vol. 18, 1992, p. 176 K. Holmberg, A. Matthews, Coatings Tribology, Tribology Series, 28, Elsevier, Amsterdam, 1994. A. Nordgren, A. Melander, Tool wear and inclusion behaviour during turning of a Ca-treated quenched and tempered steel using coated cemented carbide tools, in: Proceedings of 1st International Conference on the Behaviour of Materials in Machining, Stratford-upon-Avon, UK, November 1988, Paper 20. Palmai, 1984, Formation of non-metallic protective layers on high speed tools, Met. Technol., 11, 34, 10.1179/030716984803274422 Hirvonen, 1996, Present progress in the development of low friction coatings, Surf.: Coat. Technol., 80, 139, 10.1016/0257-8972(95)02701-7 Hogmark, 1996, Direct current bias applied to hot flame diamond deposition produces smooth low friction coatings, Wear, 200, 225, 10.1016/S0043-1648(96)07279-1 P. Hollman, Micro- and nanocrystalline diamond coatings with extreme wear resistance and ultra low friction, Acta Universitatis Upsaliensis Dissertation in Science and Technology, Vol. 325, 1997, ISBN 91-554-4084-3. Mao, 1994, Contact mechanics of engineering surfaces: state of the art, Surf. Eng., 10, 297, 10.1179/sur.1994.10.4.297 Gåhlin, 1996, The effects of compressive stresses on the abrasion of diamond coatings, Wear, 196, 226, 10.1016/0043-1648(95)06907-0 Dingremont, 1995, Application of duplex coatings for metal injection moulding, Surf. Coat. Technol., 72, 157, 10.1016/0257-8972(94)02340-9 Dingremont, 1995, Optimisation of duplex coatings built from nitriding and ion plating with continuous and discontinuous operation for construction and hot working steels, Surf. Coat. Technol., 72, 163, 10.1016/0257-8972(94)02350-6 Bergmann, 1990, Ion-plated titanium carbonitride films, Surf. Coat. Technol., 42, 237, 10.1016/0257-8972(90)90156-7 Sproul, 1994, Multilayer, multicomponent, and multiphase physical vapour deposition coatings for enhanced performance, J. Vac. Sci. Technol., A12, 1595, 10.1116/1.579361 Karner, 1996, CVD diamond coated cemented carbide cutting tools (structural materials: properties, microstructure and processing), Mater. Sci. Eng. A, A209, 402 Sproul, 1995, Reactive direct current magnetron sputtering of aluminum oxide coatings, J. Vac. Sci. Technol., 13, 1188, 10.1116/1.579859 Sproul, 1996, Physical vapour deposition tool coatings, Surf. Coat.Technol, 81, 1, 10.1016/0257-8972(95)02616-9 Sjöström, 1996, Structural, Theunissen-GSAM, J. Vac. Sci. Technol. A (Vacuum Surfaces and Films), 14, 56, 10.1116/1.579880 E. Johansson, Surface modification in tribology, Acta Universitatis Upsaliensis Dissertation in Science and Technology, Vol. 433, 1993, ISBN 91-554-3061-6, Paper VII. J. Gunnars, Ph.D. Thesis No. 37, Luleå University of Technology, Sweden, 1997. Sugimura, 1995, Fracture normal to a bimaterial interface: effects of plasticity on crack-tip shielding and amplification, Acta Metall. Mater., 43, 1157, 10.1016/0956-7151(94)00295-S S. Todorova, U. Helmersson, S.A. Barnett, J-E. Sundgren, J.E. Greene, TiN-VN strained layer superlattice hard coatings, IPAT 87, in: Proceedings of 6th International Conference on Ion and Plasma Assisted Techniques, CEP Consultants, Edinburgh, UK, 1987, p. 248, xi+481. Chu, 1993, Reactive unbalanced magnetron sputter deposition of polycrystalline TiN/NbN superlattice coatings, Surf. Coat. Technol., 57, 13, 10.1016/0257-8972(93)90331-H Shinn, 1992, Growth, structure and microhardness of epitaxial TiN/NbN superlattices, J. Mater., Res.7, 901 Larsson, 1996, Deposition and microstructure of PVD TiN-NbN multilayered coatings, Surf. Coat. Technol., 86-87, 351, 10.1016/S0257-8972(96)03026-5 Nordin, 1998, Mechanical tribological properties of multilayered PVD TiN/CrN, TiN/NbN, TiN/MoN and TiN/TaN, Surf. Coat. Technol., 106, 234, 10.1016/S0257-8972(98)00544-1 Selinder, 1998, Performance of PVD TiN/TaN and TiN/NbN superlattice coated cemented carbide tools in stainless steel machining, Surf. Coat. Technol., 105, 51, 10.1016/S0257-8972(98)00446-0 Suryanarayana, 1995, Nanocrystalline materials, Int. Mater. Rev., 40, 41, 10.1179/imr.1995.40.2.41 W.D., Sproul, Reactive sputter deposition of superhard polycrystalline nanolayered coatings, in: Proceedings of the Symposium Material Research Society on Layered Materials for Structural Applications, Pittsburgh, PA, USA, 1996, pp. 47–55, ix+314. Voevodin, 1997, Pulsed laser deposition of diamond-like carbon wear protective coatings: a review, Surf. Coat. Technol., 92, 42, 10.1016/S0257-8972(97)00007-8 Veprek, 1995, A concept for the design of novel superhard coatings, Thin solid films, 268, 64, 10.1016/0040-6090(95)06695-0 Farges, 1989, Friction and adhesive wear behaviour of W–C coatings against steel and titanium nitride, Wear, 135, 1, 10.1016/0043-1648(89)90091-4 T. Bell, New Directions in Tribology, Mech. Eng. Publication Ltd., World Trib. Congress, London, 1997, p. 121. Hogmark, 1997, Tribological properties of thin hard coatings — demands and evaluation, Surf. Coat. Technol., 90, 247, 10.1016/S0257-8972(96)03145-3 S. Hogmark, S. Jacobson, P. Hedenqvist, M. Olsson, Tribosurface properties, in: Brune, Hellborg, Whitlow and Hunderi (Eds.), Surface Characterisation, A User’s Sourcebook, Wiley-VCH, Weinheim, Germany, 1997, pp. 624–644. Hollman, 1997, Tensile testing as a method for determining the Young’s modulus of thin hard coatings, Surf. Coat. Technol., 90, 234, 10.1016/S0257-8972(96)03140-4 G.C. Brown, R.J. Pryputniewicz, Measurement of Young’s modulus on thin films under static and dynamic loading conditions, 302/SPIE Vol. 2004, Interferometry VI: Applications (1993) 302. Rouzaud, 1995, A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications, Thin Solid Films, 270, 270, 10.1016/0040-6090(95)06921-6 Blakely, 1964, Mechanical properties of vacuum-deposited gold films, J. Appl. Phys., 35, 1736, 10.1063/1.1713735 Hoffman, 1989, Nanomechanics of thin films: emphasis: tensile properties, Mater. Res. Soc. Proc., 130, 295, 10.1557/PROC-130-295 Schultrich, 1984, Elastic modulus of amorphous carbon films, Phys. Stat. Sol. (a), 145, 385, 10.1002/pssa.2211450219 Nix, 1989, Mechanical properties of thin films, Metall. Trans., 20 a, 2225 Rickerby, 1989, Engineering with surface coatings. The role of coating microstructure, Surf. Coat. Technol., 39/40, 315, 10.1016/0257-8972(89)90065-0 Helmersson, 1986, Microstructure evolution in TiN films reactively sputter deposited in multiphase substrates, Vac. Sci. Technol. A, 4, 500, 10.1116/1.573868 Windischmann, 1992, Intrinsic stress in sputter-deposited thin films, Crit. Rev. Solid State Mater. Sci., 17, 547, 10.1080/10408439208244586 U. Wiklund, J. Gunnars, S. Hogmark, How residual stresses may influence on fracture and delamination of thin hard coatings, Wear (1999), submitted for publication. Hogmark, 1997, Tribological properties of thin hard coatings: demands and evaluation, Surf. Coat. Technol., 90, 247, 10.1016/S0257-8972(96)03145-3 Rickerby, 1987, Internal stress and microstructure of titanium nitride coatings, Surf. Eng., 3, 138, 10.1179/sur.1987.3.2.138 Sue, 1992, X-ray elastic constants and residual stress of textured titanium nitride coating, Surf. Coat. Technol., 54/55, 154, 10.1016/0257-8972(92)90155-4 Venkatraman, 1992, Determination of strain distributions in aluminium thin films as a function of temperature by the use of synchrotron grazing incidence X-ray scattering, Mat. Res. Soc. Symp. Proc., 239, 227, 10.1557/PROC-239-227 Townsend, 1987, Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate, J. Appl. Phys., 62, 4438, 10.1063/1.339082 Röll, 1976, Analysis of stress and strain distribution in thin films and substrates, J. Appl. Phys., 47, 3224, 10.1063/1.323119 Stoney, 1909, The tension of metallic films deposited by electrolysis, Proc. R. Soc. London Ser. A, 82, 172, 10.1098/rspa.1909.0021 Jönsson, 1984, Hardness measurements of thin films, Thin Solid Films, 114, 257, 10.1016/0040-6090(84)90123-8 O. Vingsbo, S. Hogmark, B. Jönsson, A. Ingemarsson, in: P.J. Blau, B.R. Lawn (Eds.), Microindentation Techniques in Materials Science and Engineering, ASTM Publication 889, 1986, pp. 257–271. Burnett, 1987, Surf. Coat. Technol., 33, 191, 10.1016/0257-8972(87)90188-5 W.C. Oliver, G.M. Pharr, J. Mater. Res., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Vol. 7, No. 6, June 1992, 1564–1583. Ramsey, 1991, Bending tests to estimate the through — thickness strength and interfacial shear strength in coated systems, Thins Solid Films, 201, 81, 10.1016/0040-6090(91)90156-R Oettel, 1995, Residual stresses in PVD hard coatings, Surf. Coat. Technol., 76-77, 265, 10.1016/0257-8972(95)02581-2 Wiklund, 1997, Multilayer cracking resistance in bending, Surf. Coat. Technol., 97, 773, 10.1016/S0257-8972(97)00290-9 P.A. Steinmann, H.E. Hintermann, A review of the mechanical tests for assessment of thin-film adhesion, J. Vac. Sci. Technol. A7 (3), May/Jun (1989) 2267–2272. Steinmann, 1987, Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load, Thin Solid Films, 154, 333, 10.1016/0040-6090(87)90377-4 M. Larsson, Ph.D. Thesis No. 191, Uppsala University, Sweden, 1996. Kassman, 1991, A new test method for the intrinsic abrasion resistance of thin coatings, Surf. Coat. Technol., 50, 75, 10.1016/0257-8972(91)90196-4 Rutherford, 1996, A microabrasive wear test with particular application to coated systems, Surf. Coat. Technol., 79, 231, 10.1016/0257-8972(95)02461-1 Rutherford, 1997, Theory and application of a micro-scale abrasive wear test, J. Testing Evaluation, 25, 250, 10.1520/JTE11487J Gåhlin, 1997, The crater grinder method as a means for coating wear evaluation — an update, Surf. Coat. Technol., 90, 107, 10.1016/S0257-8972(96)03101-5 Axén, 1994, Influence of the hardness of the counterbody in three-body abrasive wear — an overlooked hardness effect, Tribol. Int., 27, 233, 10.1016/0301-679X(94)90003-5 M. Nordin, M. Larsson, S. Hogmark, Evaluation of the wear resistance of multilayered PVD TiN/TaN coatings, to be presented at ICMCTF-99. Gåhlin, 1998, A novel method to map and quantify wear on a micro-scale, Wear, 222, 93, 10.1016/S0043-1648(98)00287-7 S. Hogmark, S. Jacobson, O. Wänstrand, Universal test for friction, wear and lubrication, Swedish patent DNR 9802017-5 (1998). S. Andersson, Prediction of wear in rolling and sliding contacts, in: Proceedings of 21 IRG-OECD Meeting on Wear of Engineering Materials, Amsterdam, 25–26 March 1999. S. Hogmark, S. Jacobson, Hints and Guidelines for Tribotesting and Evaluation, JSTLE, May 1992, pp. 401–409.