A ternary optimisation of mineral additives of alkali activated cement mortars

Bakharev, 1999, Alkali activation of Australian slag cements, Cem Concr Res, 29, 113, 10.1016/S0008-8846(98)00170-7 Fernandez-Jimenez, 1999, Alkali-activated slag mortars – mechanical strength behavior, Cem Concr Res, 29, 1313, 10.1016/S0008-8846(99)00154-4 Shi, 2006 Bakharev, 2002, Sulfate attack on alkali-activated slag concrete, Cem Concr Res, 32, 211, 10.1016/S0008-8846(01)00659-7 Bakharev, 2003, Resistance of alkali-activated slag concrete to acid attack, Cem Concr Res, 33, 1607, 10.1016/S0008-8846(03)00125-X Puertas, 2003, Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres, Cem Concr Res, 33, 2031, 10.1016/S0008-8846(03)00222-9 Shi, 1998, Interface between cement paste and quartz sand in alkali-activated slag mortars, Cem Concr Res, 28, 887, 10.1016/S0008-8846(98)00050-7 Zivica, 2007, Effects of type and dosage of alkaline activator and temperature on the properties of alkali-activated slag mixtures, Constr Build Mater, 21, 1463, 10.1016/j.conbuildmat.2006.07.002 Collins, 1999, Workability and mechanical properties of alkali activated slag concrete, Cem Concr Res, 29, 455, 10.1016/S0008-8846(98)00236-1 Davidovits, 1991, Geopolymers: inorganic polymeric new materials, J Therm Anal, 37, 1633, 10.1007/BF01912193 Wongpa, 2010, Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete, Mater Des, 31, 4748, 10.1016/j.matdes.2010.05.012 Puertas, 2003, Alkali-activated fly ash/slag cement: strength behaviour and hydration products, Cem Concr Res, 30, 1625, 10.1016/S0008-8846(00)00298-2 Zivica, 2003, Alkali – silicate admixture for cement composites incorporating pozzolan or blast furnace slag, Cem Concr Res, 23, 1215, 10.1016/0008-8846(93)90182-9 Rousekova, 1997, Silica fume-basic blast furnace slag systems activated by an alkali silica fume activator, Cem Concr Res, 27, 1825, 10.1016/S0008-8846(97)00191-9 Zivica, 2006, Effectiveness of new silica fume alkali activator, Cem Concr Compos, 28, 21, 10.1016/j.cemconcomp.2005.07.004 Collins, 1999, Effects of ultra-fine materials on workability and strength of concrete containing alkali-activated slag as the binder, Cem Concr Res, 29, 459, 10.1016/S0008-8846(98)00237-3 Pu, 1988, vols. 1–6 Glukhovsky, 1978 Box, 1951, On the experimental attainment of optimum conditions, JR Stat Soc Ser B, 13, 1 Simon MJ, Lagergren ES, Wathne LG. Optimising high-performance concrete mixtures using statistical response surface methods. In: Proceedings of the 5th international symposium on utilization of high strength/high performance concrete. Oslo (Norway): Norwegian Concrete Association; 1999. p. 1311–21. Bayramov, 2004, Optimization of steel fiber reinforced concretes by means of statistical response surface method, Cem Concr Compos, 26, 665, 10.1016/S0958-9465(03)00161-6 Cho, 2007, Prediction of cyclic freeze–thaw damage in concrete structures based on response surface method, Constr Build Mater, 21, 2031, 10.1016/j.conbuildmat.2007.04.018 Yardımcı MY, Investigation of rheological, mechanical, fracture parameters and optimum design of steel fiber reinforced self compacting concretes. PhD thesis. Turkey: Dokuz Eylul University; 2007. Kockal, 2011, Optimization of properties of fly ash aggregates for high-strength lightweight concrete production, Mater Des, 32, 3586, 10.1016/j.matdes.2011.02.028 ASTM C230/C230-M-98. Standard specification for flow table for use in tests of hydraulic cement. In: Annual book of ASTM Standards, vol. 04.01; 2002. ASTM C 305-99. Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. In: Annual book of ASTM; 2002. ASTM C 348-97. Standard test method for flexural strength of hydraulic-cement mortars. In: Annual book of ASTM; 2002. ASTM C 349-97. Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). In: Annual book of ASTM; 2002. ASTM C 596-01. Standard test method for drying shrinkage of mortar containing hydraulic cement. In: Annual book of ASTM; 2004. ASTM C 642-97. Standard test method for density, absorption, and voids in hardened concrete. In: Annual book of ASTM standards, vol. 04.02. USA; 2004. Aydın S. Development of a fiber reinforced composite with alkali activated ground granulated blast furnace slag. PhD thesis. Turkey: Dokuz Eylul University; 2010. Muthukumar, 2004, Studies on polymer concretes based on optimized aggregate mix proportion, Eur Polym J, 40, 2167, 10.1016/j.eurpolymj.2004.05.004 Mohammed, 2012, Mix proportioning of concrete containing paper mill residuals using response surface methodology, Constr Build Mater, 35, 63, 10.1016/j.conbuildmat.2012.02.050