Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

Kelly, 1997, Ceramics in restorative and prosthetic dentistry, Annu Rev Mater Sci, 27, 443, 10.1146/annurev.matsci.27.1.443 Wang, 2007, Fracture toughness comparison of three test methods with four dental porcelains, Dent Mater, 23, 905, 10.1016/j.dental.2006.06.033 Burke, 1994, Fracture resistance of teeth restored with dentin-bonded crowns, Quintessence Int, 25, 335 Munz, 1999 Della Bona, 2005, Characterizing ceramics and the interfacial adhesion to resin: the relationship of microstructure, composition, properties and fractography, J Appl Oral Sci, 13, 1, 10.1590/S1678-77572005000100002 Pröbster, 1993, Survival rate of In-Ceram restorations, Int J Prosthodont, 6, 259 Pröbster, 1996, Four year clinical study of glass-infiltrated, sintered alumina crowns, J Oral Rehabil, 23, 147, 10.1111/j.1365-2842.1996.tb01225.x McLaren, 2000, Survival of In-Ceram crowns in a private practice: a prospective clinical trial, J Prosthet Dent, 83, 216, 10.1016/S0022-3913(00)80015-3 Suarez, 2004, Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs, Int J Prosthodont, 17, 35 Wasserman, 2006, Clinical long-term results of VITA In-Ceram classic crowns and fixed partial dentures: a systematic literature review, Int J Prosthodont, 19, 355 Della Bona, 2008, The clinical success of all-ceramic restorations, J Am Dent Assoc, 139, 8S, 10.14219/jada.archive.2008.0361 Ritter, 1995, Critique of test methods for lifetime predictions, Dent Mater, 11, 147, 10.1016/0109-5641(95)80051-4 Weibull, 1939, A statistical theory of the strength of materials, Ing Vetensk Akad Proc, 151, 1 Jung, 2000, Lifetime-limiting strength degradation from contact fatigue in dental ceramics, J Dent Res, 79, 722, 10.1177/00220345000790020501 Quinn, 1991, Design-data for engineering ceramics—a review of the flexure test, J Am Ceram Soc, 74, 2037, 10.1111/j.1151-2916.1991.tb08259.x Fischer, 2003, Lifetime prediction of all-ceramic bridges by computational methods, J Dent Res, 82, 238, 10.1177/154405910308200317 Lohbauer, 2002, Lifetime prediction of CAD/CAM dental ceramics, J Biomed Mater Res, 63, 780, 10.1002/jbm.10468 Studart, 2007, Fatigue of zirconia under cycling loading in water and its implications for the design of dental bridges, Dent Mater, 23, 106, 10.1016/j.dental.2005.12.008 Studart, 2007, In vitro lifetime of dental ceramics under cyclic loading in water, Biomaterials, 28, 2695, 10.1016/j.biomaterials.2006.12.033 Studart, 2007, Cyclic fatigue in water of veneer–framework composites for all-ceramic dental bridges, Dent Mater, 23, 177, 10.1016/j.dental.2006.01.011 Fairhurst, 1993, Dynamic fatigue of feldspathic porcelain, Dent Mater, 9, 269, 10.1016/0109-5641(93)90073-Y International Organization for Standardization, D.C., 3rd ed., ISO; 2008. ISO 6872. Schmitt, 1996, Cyclic fatigue of zirconia, Fatigue Fract Eng Mater Struct, 19, 1411, 10.1111/j.1460-2695.1996.tb00177.x Guazzato, 2004, Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics, Dent Mater, 20, 441, 10.1016/j.dental.2003.05.003 Chevalier, 1999, Subcritical crack propagation in 3Y-TZP ceramics: static and cyclic fatigue, J Am Ceram Soc, 92, 3129, 10.1111/j.1151-2916.1999.tb02213.x Michalske, 1983, A molecular mechanism for stress corrosion in vitreous silica, J Am Ceram Soc, 66, 284, 10.1111/j.1151-2916.1983.tb15715.x Zhu, 2003, Subcritical crack growth behavior of Al2O3-glass dental composites, J Biomed Mater Res B: Appl Biomater, 65B, 233, 10.1002/jbm.b.10007 Taskonak, 2008, Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography, Dent Mater, 24, 700, 10.1016/j.dental.2007.08.001 Tinschert, 2007, Lifetime of alumina- and zirconia ceramics used for crown and bridge restorations, J Biomed Mater Res B: Appl Biomater, 80, 317, 10.1002/jbm.b.30599 Wiederhorn, 1967, Influence of water vapor on crack propagation in soda-lime glass, J Am Ceram Soc, 50, 407, 10.1111/j.1151-2916.1967.tb15145.x Yilmaz, 2007, Flexural strength and fracture toughness of dental core ceramics, J Prosthet Dent, 98, 120, 10.1016/S0022-3913(07)60045-6 Guazzato, 2004, Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics, Biomaterials, 25, 5045, 10.1016/j.biomaterials.2004.02.036 Chong, 2002, Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials, Int J Prosthodont, 15, 183 Della Bona, 2008, Characterization of glass-infiltrated alumina-based ceramics, Dent Mater, 24, 1568, 10.1016/j.dental.2008.06.005 Guazzato, 2004, Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics, Dent Mater, 20, 449, 10.1016/j.dental.2003.05.002 Della Bona, 2007, Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic, Dent Mater, 23, 769, 10.1016/j.dental.2006.06.043 Zeng, 1996, Flexure tests on dental ceramics, Int J Prosthodont, 9, 434 Kelly, 2008, Stabilized zirconia as a structural ceramic: an overview, Dent Mater, 24, 289, 10.1016/j.dental.2007.05.005 McCabe, 1986, A statistical approach to the mechanical testing of dental materials, Dent Mater, 2, 139, 10.1016/S0109-5641(86)80021-5 Ban, 1990, Influence of test method on failure stress of brittle dental materials, J Dent Res, 69, 1791, 10.1177/00220345900690120201