Scratch behavior and FEM modelling of Cu/Si(100) thin films deposited by modulated pulsed power magnetron sputtering

Holmberg, 2006, Tribological contact analysis of a rigid ball sliding on a hard coated surface, part I modelling stresses and strains, Surf. Coat. Technol., 200, 3793, 10.1016/j.surfcoat.2005.03.040 Bull, 2006, An overview of the potential of quantitative coating adhesion measurement by scratch testing, Tribol. Int., 39, 99, 10.1016/j.triboint.2005.04.013 Jiang, 2010, Mechanical modeling of scratch behavior of polymeric coatings on hard and soft substrates, Tribol. Lett., 37, 159, 10.1007/s11249-009-9505-8 Bull, 1997, Failure mode maps in the thin films scratch adhesion test, Tribol. Int., 30, 491, 10.1016/S0301-679X(97)00012-1 Katz, 2010, Insights beside assessments into small volume cyclic response of elastic plastic systems, Procedia Eng., 2, 595, 10.1016/j.proeng.2010.03.064 Kouznetsov, 1999, A novel pulsed magnetron sputter technique utilizing very high target power densities, Surf. Coat. Technol., 122, 290, 10.1016/S0257-8972(99)00292-3 Zheng, 2015, On the pressure effect in energetic deposition of Cu thin films by modulated pulsed power magnetron sputtering: a global plasma model and experiments, J. Appl. Phys., 117, 10.1063/1.4921443 Lin, 2013, Thick CrN/AlN superlattice coatings deposited by the hybrid modulated pulsed power and pulsed dc magnetron sputtering, Surf. Coat. Technol., 228, S601, 10.1016/j.surfcoat.2011.11.037 Lin, 2013, Structure and properties of CrSiN nanocomposite coatings deposited by hybrid modulated pulsed power and pulsed dc magnetron sputtering, Surf. Coat. Technol., 216, 251, 10.1016/j.surfcoat.2012.11.053 Stoney, 1909, The tension of metallic films deposited by electrolysis, Proc. Roy. Soc. London, A82, 172, 10.1098/rspa.1909.0021 Huang, 2008, Strain hardening behavior of ultrafine-grained Cu by analyzing the tensile stress-strain curve, Adv. Eng. Mater., 10, 434, 10.1002/adem.200700324 Kinbara, 1998, Evaluation of adhesion strength of Ti films on Si(100) by the internal stress method, Thin Solid Films, 317, 165, 10.1016/S0040-6090(97)00514-2 Kriese, 1998, Nanomechanical fracture-testing of thin films, Eng. Fract. Mech., 61, 1, 10.1016/S0013-7944(98)00050-2 Tabor, 1951 Wredenberg, 2007, On the numerics and correlation of scratch testing, 2, 573 Tarasovs, 2012, Competition between the buckling-driven delamination and wrinkling in compressed thin coatings, Microelectron. Reliab., 52, 296, 10.1016/j.microrel.2011.08.007 Sharifi, 2018, A review on adhesion strength of PEO coatings by scratch test method, Surf. Rev. Lett., 25, 10.1142/S0218625X18300046 He, 2006, Effect of prior plasma nitriding applied to a hot-work tool steel on the scratch-resistant properties of PACVD TiBN and TiCN, Surf. Coat. Technol., 201, 2534, 10.1016/j.surfcoat.2006.04.064 Stallard, 2006, The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester, Tribol. Int., 39, 159, 10.1016/j.triboint.2005.04.011 Ou, 2015, Mechanical and tribological properties of CrN/TiN multilayer coatings deposited by pulsed dc magnetron sputtering, Surf. Coat. Technol., 276, 152, 10.1016/j.surfcoat.2015.06.064 Seah, 2001, Adhesive strength of electroplated copper films, J. Mater. Process. Technol., 114, 252, 10.1016/S0924-0136(01)00624-0 Wredenberg, 2010, On the stress distribution at scratching of thin film structures, J. Coat. Technol. Res., 7, 623, 10.1007/s11998-010-9242-9 Stebut, 1989, Major damage mechnisms during scratch and wear testing of hard coatings on hard substrates, Thin Solid Films, 181, 555, 10.1016/0040-6090(89)90524-5 Wang, 1998, Evaluation of thermally-sprayed ceramic coatings using a novel ball-on-inclined plane scratch method, Wear, 218, 96, 10.1016/S0043-1648(98)00182-3 Browning, 2006, Quantitative evaluation of scratch resistance of polymeric coatings based on a standardized progressive load scratch test, Surf. Coat. Technol., 201, 2970, 10.1016/j.surfcoat.2006.06.007 Jiang, 2015, Effect of stick-slip on the scratch performance of polypropylene, Tribol. Int., 91, 1, 10.1016/j.triboint.2015.06.024 Velicu, 2017, Copper thin films deposited under different power delivery modes and magnetron configuration: a comparative study, Surf. Coat. Technol., 327, 192, 10.1016/j.surfcoat.2016.11.001 Lu, 2000, Superplastic extensibility of nanocrystalline copper at room temperature, Science, 287, 1463, 10.1126/science.287.5457.1463 Huang, 2009, Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films, Thin Solid Films, 517, 4857, 10.1016/j.tsf.2009.03.043