Arsenic Releasing from Poly-Metallic Sulfide Deposits at Hetao Plain, China

Geochemistry International - Tập 56 - Trang 1179-1188 - 2018
Yihui Dong1,2,3, Teng Ma1,2, Jiale Li3, Yue Liu1,2
1School of Environmental Studies, China University of Geosciences, Wuhan, China
2State Key Laboratory of Biogeology and Environmental Geology, China University of Geosciences, Wuhan, China
3School of Water Resources and Environmental Engineering, East China University of Technology, Nanchang, China

Tóm tắt

Arsenic (As)-bearing ores of poly-metallic sulfide deposits provide water-bearing medium containing As for high-As aquifer and release As in leaching process. Two ores samples M1 and M4 were collected from two big-scale poly-metallic sulfide deposits, Dongshengmiao and Tanyaokou, with As contents of 78 and 69 μg/g, respectively. Pyrite as the major mineral in ores accounts for over 70 and 20% of all minerals in M1 and M4, respectively. The carbonate contents including dolomite (CaMg(CO3)2), smithsonite (ZnCO3), and siderite (FeCO3) in M4 are higher than in M1. As the major As speciation in M1 and M4, residual As accounts for 97.55 and 95.17% of the total detected As, respectively. Results of leaching experiment indicate that under the reducing condition in column filled with M1, As (V) can be produced by pyrite dissolution and oxidation and then reduced as As(III) which is difficult to be adsorbed onto the mineral surface but easy to migrate in aquatic solution. HFO prevents ore surface from contacting with the oxygen in leaching solution, and adsorbs As onto its surface, leading to the relatively lower concentrations of Fe and As in leachate of M4. The leaching rates of As would be are 0.46 for M1 and 0.13% for M4. According to geological survey information, the demonstrated reserves of pyrite at Tanyaokou and Dongshengmiao reach up to 86 288 000 000 and 216 915 000 000 kg, respectively. Assuming that the releasing capability of the ores in natural environment is nearly equal to that in our experiments, 6 730 000 and 15 000 000 kg of As from Tanyaokou and Dongshengmiao mine is expected to be in the risk of release. This study will provide a better understanding of the genesis of high-As groundwater in the Hetao Plain.

Tài liệu tham khảo

C. R. Gao, W. B. Liu, C. E. Feng, Y. J. Chen, G. Zhang, and J. X. Song, “Research on the formation mechanism of high arsenic groundwater in arid and semi-arid regions: A case study of Hetao Plain in Inner Mongolia, China,” Front. Earth. Sci. 2, 13–29 (2014). China Geological Survey, Analytical and Technical Standard for Ecological Geochemical Assessment of Samples (Beijing, 2015). Y. M. Deng, Y. X. Wang, and T. Ma, “Isotope and minor element geochemistry of high arsenic groundwater from Hangjinhouqi, the Hetao Plain, Inner Mongolia,” Appl. Geochem. 24, 587–599 (2009). Y. H. Dong, T. Ma, S. H. Zhou, and J. W. Zhang, “Experimental study of removal of As(V) from water with iron oxide-coated sand,” Hydrogeol. & Eng. Geol. 42, 126–131 (2015a). Y. H. Dong, T. Ma, X. J. Xie, W. K. Zeng, and Y. Liu, “Experimental study on prevention and control of groundwater arsenic contamination,” Water Res. & Hydropower Eng. 46, 21–25 (2015b). H. M. Guo, Y. Zhang, L. N. Xing, and Y. F. Jia, “Spatial variation in arsenic and fluoride concentrations of shallow groundwater from the town of Shahai in the Hetao basin, Inner Mongolia,” Appl. Geochem. 27, 2187–2196 (2012). W. X. Huang, Research on the Mine-Forming Character of Polymetallic Sulfide Deposits in Langshan District, Proterozoic (Chengdu University of Technology, Chengdu University of Technology, Chengdu, 2009). S. R. Jennings, D. J. Dollhopf, and W. P. Inskeep, “Acid production from sulfide minerals using hydrogen peroxide weathering,” Appl. Geochem. 15, 235–243 (2000). M. Mihaljevič, L. Sisr, V. Ettler, O. Šebek, and J. Průša, “Oxidation of As-bearing gold ore—a comparison of batch and column experiments,” J. Geochem. Explor. 81, 59–70 (2004). R. V. Nicholson, R. W. Gillham, and E. J. Reardon, “Pyrite oxidation in carbonate-buffered solutions. 1. Experimental kinetics,” Geochim. Cosmochim. Acta 52, 1077–1085 (1988). R. V. Nicholson, R. W. Gillham, and E. J. Reardon, “Pyrite oxidation in carbonate-buffered solution: 2. Rate control by oxide coatings,” Geochim. Cosmochim. Acta 54, 395–402 (1990). Z. Pan, L. Ye, H. Zhong, T. Liu, C. Li, and Z. Cheng, “Weathering and leaching experiments on Cd-rich sphalerite ore in nearly neutral solutions,” Ac. Mineral. Sinica 27, 558–562 (2007). L. Rodriguez-Lado, G. F. Sun, M. Berg, Q. Zhang, H. B. Xue, Q. M. Zheng, and C. A. Johnson, “Groundwater Arsenic Contamination Throughout China,” Science 341, 866–868 (2013). K. S. Savage, T. N. Tingle, P. A. O’Day, G. A. Waychunas, and D. K. Bird, “Arsenic speciation in pyrite and secondary weathering phases, Mother Lode Gold District, Tuolumne County, California,” Appl. Geochem. 15, 219–1244 (2000). P. L. Smedley, W. M. Edmunds, and K. B. Pelig-Ba, “Mobility of arsenic in groundwater in the Obuasi gold mining area of Ghana: some implications for human health,” J. Geol. Soc. 113 (1), 163 (1996). A. Tessier, P. G. C. Campbell, and M. Blsson, “Sequential extraction procedure for the speciation of particulate trace metal,” Anal. Chem. 51, 845–851 (1979). H. Zhang, D. S. Ma, and X. X. Hu, “Arsenic pollution in groundwater from Hetao Area, China,” Environ. Geol. 41, 638–643 (2002). K. Zhao and H. M. Guo, “Behavior and mechanism of arsenate adsorption on activated natural siderite: evidences from FTIR and XANES analysis,” Environ. Sci. Pollut. R. 21, 1944–1953 (2014).