Shear strengthening of RC beams with thin panels of mortar reinforced with recycled steel fibres

ACI 318, 2008, Building code requirements for structural concrete and commentary Aiello, 2009, Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength, Waste Manag., 29, 1960, 10.1016/j.wasman.2008.12.002 Baghi, 2015 Baghi, 2016, Shear properties of the strain hardening cementitious composite material, J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0001603 Baghi, 2016, Shear strengthening of reinforced concrete beams with Hybrid Composite Plates (HCP) technique: experimental research and analytical model, Eng. Struct., 125, 504, 10.1016/j.engstruct.2016.07.023 Balaguru, 1987, Mechanical properties of slurry infiltrated fiber concrete (SIFCON) Barros, 2016, Debilities and strengths of FEM-based constitutive models for the material nonlinear analysis of steel fiber reinforced concrete structures Barros, 2013, A FEM-based model to predict the behaviour of RC beams shear strengthened according to the NSM technique, Eng. Struct. J., 56, 1192, 10.1016/j.engstruct.2013.06.034 Bentz, 2006, Simplified modified compression field theory for calculating shear strength of reinforced concrete elements, ACI Struct. J., 103, 614 Blanksvärd, 2009 Caggiano, 2017, On the mechanical response of hybrid fiber reinforced concrete with recycled and industrial steel fibers, Construct. Build. Mater., 147, 286, 10.1016/j.conbuildmat.2017.04.160 2011 Collins, 1991 Costa, 2015, Tensile creep of a structural epoxy adhesive: experimental and analytical characterization, Int. J. Adhesion Adhes., 59, 115, 10.1016/j.ijadhadh.2015.02.006 Cunha, 2010, Pullout behaviour of steel fibres in self-compacting concrete, J. Mater. Civ. Eng., 22, 1, 10.1061/(ASCE)MT.1943-5533.0000001 Domski, 2017, Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete, J. Clean. Prod., 158, 18, 10.1016/j.jclepro.2017.04.165 EN 10002-1, 1990, 35 Eurocode 2, 2004 Graeff, 2012, Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres, Eng. Struct., 45, 385, 10.1016/j.engstruct.2012.06.030 Iosipescu, 1967, New accurate method for single shear testing of metals, J. Mater., 3, 537 Leung, 1998, Micromechanical modeling of softening behaviour in steel fibre reinforced cementicious composites, Int. J. Solid Struct., 35, 4205, 10.1016/S0020-7683(97)00310-7 Leung, 1999, Optimal steel fibre strength for reinforcement of cementitious materials, J. Mater. Civ. Eng., 11, 116, 10.1061/(ASCE)0899-1561(1999)11:2(116) Li, 1998, Engineered cementitious composites for structural applications, Mater. Civil Eng., 10, 66, 10.1061/(ASCE)0899-1561(1998)10:2(66) LNEC E397-1993, 1993 Mendes, 2014, Influence of fatigue and aggressive exposure on GFRP girder to SFRC deck all-adhesive connection, Compos. Struct. J., 110, 152, 10.1016/j.compstruct.2013.11.018 Neocleous, 2006, Design issues for concrete reinforced with steel fibres, including fibres recovered from used tyres, Mater. Civil Eng., 18, 677, 10.1061/(ASCE)0899-1561(2006)18:5(677) NP EN 12390-3, 2011 NZS4203, 1992 Pereira, 2012, Direct assessment of tensile stress-crack opening behavior of Strain Hardening Cementitious Composites (SHCC), Cement Concr. Res., 42, 834, 10.1016/j.cemconres.2012.03.006 Silva, 2016, Effects of different environmental conditions on the mechanical characteristics of a structural epoxy, Compos. Part B, 88, 55, 10.1016/j.compositesb.2015.10.036 Varma, 2012 Ventura-Gouveia, 2011 Zamanzadeh, 2015, Recycled steel fibre reinforced concrete failing in bending and in shear, J. Construct. Build. Mater., 85, 195, 10.1016/j.conbuildmat.2015.03.070 Zamanzadeh, 2015, Thin panels of cement composites reinforced with recycled fibres for the shear strengthening of reinforced concrete elements