Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene

Tjong, 2013, Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets, Mater Sci Eng R, 74, 281, 10.1016/j.mser.2013.08.001 Nieto, 2016, Graphene reinforced metal and ceramic matrix composites: a review, Int Mater Rev, 62, 241, 10.1080/09506608.2016.1219481 Wang, 2012, Reinforcement with graphene nanosheets in aluminum matrix composites, Scripta Mater, 66, 594, 10.1016/j.scriptamat.2012.01.012 Hwang, 2013, Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process, Adv Mater, 25, 6724, 10.1002/adma.201302495 Chen, 2016, Effects of graphene content on the microstructure and properties of copper matrix composites, Carbon, 96, 836, 10.1016/j.carbon.2015.10.023 Chen, 2016, Fabrication of in-situ grown graphene reinforced Cu matrix composites, Sci Rep, 6, 19363, 10.1038/srep19363 Cao, 2017, Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity, Carbon, 117, 65, 10.1016/j.carbon.2017.02.089 Xiong, 2015, Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite, ACS Nano, 9, 6934, 10.1021/acsnano.5b01067 Yang, 2017, Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons, Carbon, 118, 250, 10.1016/j.carbon.2017.03.055 Tang, 2014, Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids, Mater Sci Eng A, 599, 247, 10.1016/j.msea.2014.01.061 Luo, 2017, Mechanical enhancement of copper matrix composites with homogeneously dispersed graphene modified by silver nanoparticles, J Alloys Compd, 729, 293, 10.1016/j.jallcom.2017.09.102 Chu, 2013, Improvement of interface and mechanical properties in carbon nanotube reinforced Cu-Cr matrix composites, Mater Design, 45, 407, 10.1016/j.matdes.2012.09.027 Moghadam, 2015, Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) andgraphene-a review, Compos Part B, 77, 402, 10.1016/j.compositesb.2015.03.014 Jiang, 2017, Electroless Ni-plated graphene for tensile strength enhancement of copper, Mater Sci Eng A, 679, 323, 10.1016/j.msea.2016.10.029 Davidson, 2000, A comparison of aluminium-based metal-matrix composites reinforced with coated and uncoated particulate silicon carbide, Compos Sci Technol, 60, 865, 10.1016/S0266-3538(99)00151-7 Hu, 2014, Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites, J Alloys Compd, 610, 635, 10.1016/j.jallcom.2014.04.224 Anasori, 2014, Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles, Mater Sci Eng A, 618, 511, 10.1016/j.msea.2014.09.039 Teng, 2004, Thermodynamic investigations of Cr3C2 and reassessment of the Cr-C system, Metall Mater Trans A, 35, 3673, 10.1007/s11661-004-0273-7 Si, 2017, Effect of carbide interlayers on the microstructure and properties of graphene-nanoplatelet-reinforced copper matrix composites, Mater Sci Eng A, 708, 185, 10.1016/j.msea.2017.10.015 Chen, 2016, Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites, Carbon, 114, 198, 10.1016/j.carbon.2016.12.013 Chu, 2013, On the thermal conductivity of Cu-Zr/diamond composites, Mater Design, 45, 36, 10.1016/j.matdes.2012.09.006 Chen, 2012, Interfacial characterization and thermal conductivity of diamond/Cu composites prepared by two HPHT techniques, J Mater Sci, 1–9 Balandin, 2011, Thermal properties of graphene and nanostructured carbon materials, Nature Mater, 10, 569, 10.1038/nmat3064 Yoon, 2011, Negative thermal expansion coefficient of graphene measured by Raman spectroscopy, Nano Lett, 11, 3227, 10.1021/nl201488g Sidhu, 2016, Metal matrix composites for thermal management: a review, Crit Rev Solid State, 41, 132, 10.1080/10408436.2015.1076717 Wejrzanowski, 2016, Thermal conductivity of metal-graphene composites, Mater Design, 99, 163, 10.1016/j.matdes.2016.03.069 Boden, 2014, Nanoplatelet size to control the alignment and thermal conductivity in copper-graphite composites, Nano Lett, 14, 3640, 10.1021/nl501411g Zou, 2015, Noble metal-free hydrogen evolution catalysts for water splitting, Chem Soc Rev, 44, 5148, 10.1039/C4CS00448E Wang, 2015, Hybrids of Mo2C nanoparticles anchored on graphene sheets as anode materials for high performance lithium-ion batteries, J Mater Chem A, 3, 17403, 10.1039/C5TA03929K Parker, 1961, Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity, J Appl Phys, 32, 1679, 10.1063/1.1728417 Pei, 2012, The reduction of graphene oxide, Carbon, 50, 3210, 10.1016/j.carbon.2011.11.010 Ferrari, 2007, Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects, Solid State Commun, 143, 47, 10.1016/j.ssc.2007.03.052 Dreyer, 2010, The chemistry of graphene oxide, Chem Soc Rev, 39, 228, 10.1039/B917103G Higgins, 2014, Development and simulation of sulfur-doped graphene supported platinum with exemplary stability and activity towards oxygen reduction, Adv Funct Mater, 27, 4325, 10.1002/adfm.201400161 Zhang, 2012, A facile one-pot route for the controllable growth of small sized and well-dispersed ZnO particles on GO-derived graphene, J Mater Chem, 22, 11778, 10.1039/c2jm31401k Lee, 2014, Simultaneous strengthening and toughening of reduced graphene oxide/alumina composites fabricated by molecular-level mixing process, Carbon, 78, 212, 10.1016/j.carbon.2014.06.074 Xiong, 2013, The use of nitrogen-doped graphene supporting Pt nanoparticles as a catalyst for methanol electrocatalytic oxidation, Carbon, 52, 181, 10.1016/j.carbon.2012.09.019 Mao, 2016, Evolution of ultrafine grained microstructure and nano-sized semi-coherent oxide particles in austenitic oxide dispersion strengthened steel, Mater Charact, 117, 91, 10.1016/j.matchar.2016.04.022 Yuan, 2018, Interfacial structure in AZ91 alloy composites reinforced by graphene nanosheets, Carbon, 127, 177, 10.1016/j.carbon.2017.10.090 Zhang, 2016, Experimental investigation of interfaces in graphene materials/copper composites from a new perspective, RSC Adv, 6, 52219, 10.1039/C6RA07606H Zhao, 2014, Fabrication and tensile properties of graphene/copper composites prepared by electroless plating for structrual applications, Phys Status Solidi A, 211, 2878, 10.1002/pssa.201431478 Miracle, 2005, Metal matrix composites–from science to technological significance, Compos Sci Technol, 65, 2526, 10.1016/j.compscitech.2005.05.027 Meyers, 2006, Mechanical properties of nanocrystalline materials, Prog Mater Sci, 51, 427, 10.1016/j.pmatsci.2005.08.003 Liu, 2013, Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, Nature Mater, 12, 344, 10.1038/nmat3544 Cha, 2005, Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing, Adv Mater, 17, 1377, 10.1002/adma.200401933 Yue, 2017, Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites, J Alloys Compd, 691, 755, 10.1016/j.jallcom.2016.08.303 Chu, 2014, Enhanced strength in bulk graphene–copper composites, Phys Status Solidi A, 211, 184, 10.1002/pssa.201330051 Kim, 2014, Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties, Carbon, 69, 55, 10.1016/j.carbon.2013.11.058 Zhang, 2017, Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network, Nanoscale, 9, 11929, 10.1039/C6NR07335B Chen, 2016, Fabrication of three-dimensional graphene/Cu composite by in-situ CVD and its strengthening mechanism, J Alloys Compd, 688, 69, 10.1016/j.jallcom.2016.07.160 Ovid'Ko, 2014, Metal-graphene nanocomposites with enhanced mechanical properties: a review, Rev Adv Mater Sci., 38, 190 Azarniya, 2017, Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites, Prog Mater Sci, 90, 276, 10.1016/j.pmatsci.2017.07.007 Yoo, 2013, Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes, Scripta Mater, 68, 711, 10.1016/j.scriptamat.2013.01.013 Li, 2015, Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure, Nano Lett, 15, 8077, 10.1021/acs.nanolett.5b03492 George, 2005, Strengthening in carbon nanotube/aluminium (CNT/Al) composites, Scripta Mater, 53, 1159, 10.1016/j.scriptamat.2005.07.022 Chen, 2017, Strength and strain hardening of a selective laser melted AlSi10Mg alloy, Scripta Mater, 141, 45, 10.1016/j.scriptamat.2017.07.025 Akbarpour, 2013, Effect of nanoparticle content on the microstructural and mechanical properties of nano-SiC dispersed bulk ultrafine-grained Cu matrix composites, Mater Design, 52, 881, 10.1016/j.matdes.2013.05.072 Bonderer, 2008, Bioinspired design and assembly of platelet reinforced polymer films, Science, 319, 1069, 10.1126/science.1148726 Chen, 2015, Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests, Compos Sci Technol, 113, 1, 10.1016/j.compscitech.2015.03.009 Lee, 2008, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321, 385, 10.1126/science.1157996 Cooper, 1967, Tensile properties of fibre-reinforced metals: fracture mechanics, J Mech Phys Solids, 15, 279, 10.1016/0022-5096(67)90017-8 Kelly, 1965, Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum, J Mech Phys Solids, 13, 339, 10.1016/0022-5096(65)90035-9 Zhou, 2016, In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites, Carbon, 106, 37, 10.1016/j.carbon.2016.05.015 Chu, 2013, On the thermal expansion of CNT/Cu composites for electronic packaging applications, Appl Phys A, 111, 439, 10.1007/s00339-013-7634-2 Subramaniam, 2014, Carbon nanotube-copper exhibiting metal-like thermal conductivity and silicon-like thermal expansion for efficient cooling of electronics, Nanoscale, 6, 2669, 10.1039/C3NR05290G Liu, 2013, Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers, Mater Res Bull, 48, 4811, 10.1016/j.materresbull.2013.07.064 Nan, 1997, Effective thermal conductivity of particulate composites with interfacial thermal resistance, J Appl Phys, 81, 6692, 10.1063/1.365209 Renteria, 2015, Strongly anisotropic thermal conductivity of free-standing reduced graphene oxide films annealed at high temperature, Adv Funct Mater, 25, 4664, 10.1002/adfm.201501429 Chu, 2018, Largely enhanced thermal conductivity of graphene/copper composites with highly aligned graphene network, Carbon, 127, 102, 10.1016/j.carbon.2017.10.099 Chu, 2018, Thermal properties of graphene/metal composites with aligned graphene, Mater Design, 140, 85, 10.1016/j.matdes.2017.11.048