Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method

Brühwiler E, Denarié E. Rehabilitation of concrete structures using ultra-high performance fibre reinforced concrete. In: Proc, Second Int Symp Ultra-high Perform Concr; 2008. Iskhakov, 2013, High performance repairing of reinforced concrete structures, Mater Des, 44, 216, 10.1016/j.matdes.2012.07.041 Diao, 2009, Influence of curing regime on the ductility of ultra-high performance fiber reinforced concrete (UHPFRC), ICCTP, 1 Bayramov, 2004, Optimisation of steel fibre reinforced concretes by means of statistical response surface method, Cement Concr Compos, 26, 665, 10.1016/S0958-9465(03)00161-6 Fardis MN. Innovative materials and techniques in concrete construction: ACES Workshop. University of Patras: Springer Dordrecht Heidelberg London New York; 2012. Wille, 2011, Ultra-high performance concrete with compressive strength exceeding 150MPa (22ksi): a simpler way, ACI Mater J, 108, 46 Spasojević A. Structural implications of ultra-high performance fibre-reinforced concrete in bridge design. Ph.D. thesis, EPFL; 2008. Benson, 2005, CARDIFRC®-development and mechanical properties. Part III: Uniaxial tensile response and other mechanical properties, Mag Concr Res, 57, 433, 10.1680/macr.2005.57.8.433 Richard, 1995, Composition of reactive powder concretes, Cem Concr Res, 25, 1501, 10.1016/0008-8846(95)00144-2 Habel, 2008, Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading, Cement Concr Compos, 30, 938, 10.1016/j.cemconcomp.2008.09.001 Worrell, 2001, Carbon dioxide emissions from the global cement industry 1, Annu Rev Energy Environ, 26, 303, 10.1146/annurev.energy.26.1.303 Arshad MF. Influence of multiple blended binders on engineering properties and durability of concrete Ph.D thesis. Malaysia: Universiti Sains Malaysia; 2010. Thomas, 2011 Gopinath, 2011, Optimised mix design for normal strength and high performance concrete using particle packing method, Arch Civ Eng, 4, 357, 10.2478/v.10169-011-0026-0 Simon MJ, Lagergren ES, Snyder KA. Concrete mixture optimization using statistical mixture design methods. In: Proc PCI/FHWA Int Symp High Perform, Concr; 1997. p. 230–44. Haghighi A, Koohkan MR, Shekarchizadeh M. Optimizing mix proportions of reactive powder concrete using group method of data handling and genetic programming. In: 32nd Conf Our World Concr Struct. Singapore; 2007. De Larrard, 1994, Optimization of ultra-high-performance concrete by the use of a packing model, Cem Concr Res, 24, 997, 10.1016/0008-8846(94)90022-1 Mehta, 2004, High-performance, high-volume fly ash concrete for sustainable development, 3 Benson, 2005, CARDIFRC®-development and mechanical properties. Part I: Development and workability, Mag Concr Res, 57, 347, 10.1680/macr.2005.57.6.347 Sata, 2007, Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete, Constr Build Mater, 21, 1589, 10.1016/j.conbuildmat.2005.09.011 Montgomery, 2008 Tayeh, 2012, Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay, Constr Building Mater, 36, 538, 10.1016/j.conbuildmat.2012.06.013 Auta, 2011, Optimized waste tea activated carbon for adsorption of Methylene Blue and Acid Blue 29 dyes using response surface methodology, Chem Eng J, 175, 233, 10.1016/j.cej.2011.09.100 Committee, 2008 Toledo Filho, 2012, Performance assessment of ultra high performance fiber reinforced cementitious composites in view of sustainability, Mater Des, 36, 880, 10.1016/j.matdes.2011.09.022 British Standard Institution. BSI EN 12390-3, Testing hardened concrete. Compressive strength of test specimens. London: BSI; 2002. Li, 2004, Micromechanics-based durability study of polyvinyl alcohol-engineered cementitious composite, ACI Mater J, 101, 242 Jolicoeur, 1998, Chemical admixture-cement interactions: phenomenology and physico-chemical concepts, Cement Concr Compos, 20, 87, 10.1016/S0958-9465(97)00062-0 Yurdakul E. Optimizing concrete mixtures with minimum cement content for performance and sustainability. Ph.D Thesis, Iowa State University; 2010. Shilstone, 2002, Performance-based concrete mixtures and specifications for today, Concr Int, 24, 80 Schnütgen B, Vandewalle L. In: Proc 31: international RILEM workshop on test and design methods for steel fibre reinforced concrete-background and experiences. RILEM Publications; 2003. Wassermann, 2009, Minimum cement content requirements: a must or a myth?, Mater Struct, 42, 973, 10.1617/s11527-008-9436-0 Alsadey, 2012, Influence of superplasticizer on strength of concrete, Int J Res Eng Technol, 1 lucic vandewalle. Design with σ–ε method, In: Proc 31: international RILEM workshop on test and design methods for steel fibre reinforced concrete-background and experiences. RILEM Publications; 2003. Chan, 2004, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cement and Concrete Research., 34, 1167, 10.1016/j.cemconres.2003.12.023 Ghafari, 2009, Application of response surface methodology (RSM) to optimize coagulation–flocculation treatment of leachate using poly-aluminum chloride (PAC) and alum, J Hazard Mater, 163, 650, 10.1016/j.jhazmat.2008.07.090 Graybeal BA. Material property characterization of ultra-high performance concrete. Ph.D thesis. McLean; 2007.