Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach

International Journal of Hydrogen Energy - Tập 44 - Trang 29159-29165 - 2019
E.A. Berdonosova1, V.Yu. Zadorozhnyy2,3, M.Yu. Zadorozhnyy2, K.V. Geodakian1, M.V. Zheleznyi2, A.A. Tsarkov2, S.D. Kaloshkin2, S.N. Klyamkin1
1Department of Chemistry, Lomonosov Moscow State University, 119991 Moscow, Russia
2National University of Science and Technology «MISIS», Moscow 119049, Russia
3Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben 8700, Austria

Tài liệu tham khảo

Zaluski, 1997, Nanocrystalline metal hydrides, J Alloy Comp, 253, 70, 10.1016/S0925-8388(96)02985-4 Morris, 1999, The effect of novel processing on hydrogen uptake in FeTi and magnesium-based alloys, J Alloy Comp, 293, 458, 10.1016/S0925-8388(99)00338-2 Konstanchuk, 1998, Hydrogen interaction with alloys and intermetallic compounds prepared by mechanochemical methods, Usp Khim, 67, 85, 10.1070/RC1998v067n01ABEH000368 Zaluska, 2001, Structure, catalysis and atomic reactions on the nanoscale: a systematic approach to metal hydrides for hydrogen storage, Appl Phys A, 72, 157, 10.1007/s003390100783 Reilly, 1974, Formation and properties of iron titanium hydride, Inorg Chem, 13, 218, 10.1021/ic50131a042 Sandrock, 1999, Panoramic overview of hydrogen storage alloys from a gas reaction point of view, J Alloy Comp, 293, 877, 10.1016/S0925-8388(99)00384-9 Hotta, 2007, Synthesis of Ti–Fe alloys by mechanical alloying, J Alloy Comp, 439, 221, 10.1016/j.jallcom.2006.05.137 Abe, 2007, Hydrogen absorption of TiFe alloy synthesized by ball milling and postannealing, J Alloy Comp, 446, 200, 10.1016/j.jallcom.2006.12.063 Falcao, 2010, An investigation on the mechanical alloying of TiFe compound by high-energy ball milling, Mater Sci Forum, 661, 329, 10.4028/www.scientific.net/MSF.660-661.329 Zadorozhnyy, 2011, Mechanochemical synthesis and hydrogen sorption properties of nanocrystalline TiFe, Inorg Mater, 47, 1081, 10.1134/S0020168511100232 Zadorozhnyy, 2017, Preparation and hydrogen storage properties of nanocrystalline TiFe synthesized by mechanical alloying, Prog Nat Sci: Mater Int, 27, 149, 10.1016/j.pnsc.2016.12.008 Davids, 2012, Influence of oxygen introduced in TiFe-based hydride forming alloy on its morphology, structural and hydrogen sorption properties, Int J Hydrogen Energy, 37, 18155, 10.1016/j.ijhydene.2012.09.106 Emami, 2015, Hydrogen storage performance of TiFe after processing by ball milling, Acta Mater, 88, 190, 10.1016/j.actamat.2014.12.052 Haraki, 2008, Properties of hydrogen absorption by nano-structured FeTi alloys, Int J Mater Res, 99, 507, 10.3139/146.101669 Berdonosova, 2016, Calorimetric study of peculiar hydrogenation behavior of nanocrystalline TiFe, J Alloy Comp, 688, 1181, 10.1016/j.jallcom.2016.07.145 Falcao, 2018, An alternative route to produce easily activated nanocrystalline TiFe powder, Int J hydrogen energy, 43, 16107, 10.1016/j.ijhydene.2018.07.027 Falcao, 2014, Synthesis of TiFe compound from ball milled TiH2 and Fe powders mixtures, Mater Sci Forum, 802, 61, 10.4028/www.scientific.net/MSF.802.61 Gueguen, 2011, Influence of the addition of vanadium on the hydrogenation properties of the compounds TiFe0.9Vx and TiFe0.8Mn0.1Vx (x = 0, 0.05 and 0.1), J Alloy Comp, 509, 5562, 10.1016/j.jallcom.2011.02.036 Lv, 2016, Hydrogen storage properties of Ti0.95FeZr0.05, TiFe0.95Zr0.05 and TiFeZr0.05 alloys, Int J Hydrogen Energy, 41, 22128, 10.1016/j.ijhydene.2016.07.091 Patel, 2018, Effect of annealing on microstructure and hydrogenation properties of TiFe+X wt% Zr (X=4, 8), Int J Hydrogen Energy, 43, 6238, 10.1016/j.ijhydene.2018.02.029 Ali, 2017, Hydrogenation properties of Ti-Fe-Mn alloy with Cu and Y as additives, Int J Hydrogen Energy, 42, 2229, 10.1016/j.ijhydene.2016.09.037 Endo, 2017, Operation of a bench-scale TiFe-based alloy tank under mild conditions for low-cost stationary hydrogen storage, Int J Hydrogen Energy, 42, 5246, 10.1016/j.ijhydene.2016.11.088 Boulghallat, 1991, Hydriding kinetics of TiFe0.5Co0.5 compounds, J Less Common Met, 172, 1052, 10.1016/S0022-5088(06)80011-1 Lee, 1999, Correlation of substitutional solid solution with hydrogenation properties of TiFe1-xMx (M = Ni, Co, Al) alloys, J Alloy Comp, 291, 254, 10.1016/S0925-8388(99)00262-5 Abrashev, 2010, Microstructure and electrochemical hydriding/dehydriding properties of ball-milled TiFe-based alloys, Int J Hydrogen energy, 35, 6332, 10.1016/j.ijhydene.2010.03.129 Qu, 2015, Effects of Co introduction on hydrogen storage properties of Ti-Fe-Mn alloys, Int J Hydrogen Energy, 40, 2729, 10.1016/j.ijhydene.2014.12.089 Sasai, 1983, Hydrogen storage characteristics of Fe-Ti-Zr-Nb alloys, J Less-Common Met, 89, 281, 10.1016/0022-5088(83)90281-3 Fukushima, 1983, Surface properties of TiFe and TiFe-Nb 6.8 at.% electrodes in aqueous solution, Int J Hydrogen Energy, 8, 33, 10.1016/0360-3199(83)90032-0 Ishikawa, 2013, Microstructure and hydrogen permeability in Nb–TiFe alloys, J Alloy Comp, 566, 68, 10.1016/j.jallcom.2013.02.174 MYu, 2013, Mechanochemical synthesis of a TiFe nanocrystalline intermetallic compound and its mechanical alloying with third component, Met Sci Heat Treat, 54, 461, 10.1007/s11041-013-9531-x Zadorozhnyy, 2014, Mechanical alloying of nanocrystalline intermetallic compound TiFe doped by aluminum and chromium, J Alloy Comp, 586, S56, 10.1016/j.jallcom.2013.01.138 Zadorozhnyy, 2014, Mechanical alloying of nanocrystalline intermetallic compound TiFe doped with sulfur and magnesium, J Alloy Comp, 615, S569, 10.1016/j.jallcom.2013.12.144 Yakovleva, 1996, Interaction mechanism of hydrogen with the CaCu5-type crystal structure intermetallic compounds, J Alloy Comp, 241, 112, 10.1016/0925-8388(96)02292-X Veremeeva, 2006, Effect of partial substitution of nickel for copper on LaNi5 activation, Russ Chem Bull, 55, 949, 10.1007/s11172-006-0360-6 Shelekhov, 1999, Modeling of the motion and heating of balls in a planetary ball mill: effect of processing conditions on the mechanical activation products of Ni + Nb powder mixtures, Materialovedenie, 10, 13 Sviridova, 2014, Influence of mechanical alloying conditions on amorphous phase formation in Fe67B33, J Alloy Comp, 586, S73, 10.1016/j.jallcom.2012.10.118 VYu, 2008, Appearance of metastable state in Fe-Ti and Ni-Ti systems in the process of mechanochemical synthesis, Met Sci Heat Treat, 50, 404 Shelekhov, 2000, Programs for X-ray analysis of polycrystals, Met Sci Heat Treat, 42, 309, 10.1007/BF02471306 Zadorozhnyy, 2010, Production of intermetallic compound of FeTi by means of mechanochemical synthesis and its interaction with hydrogen, Inorg Mater: Appl Res, 1, 41, 10.1134/S2075113310010065