Epoxy in nanotechnology: A short review

Jahromi, 2016, Morphology and mechanical properties of polyamide/clay nanocomposites toughened with NBR/NBR-g-GMA: a comparative study, Compos. Part B: Eng., 90, 478, 10.1016/j.compositesb.2015.12.042

Paran, 2019, Thermal decomposition kinetics of dynamically vulcanized polyamide 6-acrylonitrile butadiene rubber-halloysite nanotube nanocomposites, J. Appl. Polym. Sci., 47483, 10.1002/app.47483

Karami, 2018, State of cure in silicone/clay nanocomposite coatings: the puzzle and the solution, Prog. Org. Coat., 125, 222, 10.1016/j.porgcoat.2018.09.019

Jouyandeh, 2018, Curing behavior of epoxy/Fe3O4 nanocomposites: a comparison between the effects of bare Fe3O4, Fe3O4/SiO2/chitosan and Fe3O4/SiO2/chitosan/imide/phenylalanine-modified nanofillers, Prog. Org. Coat., 123, 10, 10.1016/j.porgcoat.2018.06.006

Pissis, 2007

Mittal, 2009

Kumar, 2017, 50th anniversary perspective: are polymer nanocomposites practical for applications?, Macromolecules, 50, 714, 10.1021/acs.macromol.6b02330

Wernik, 2014, On the mechanical characterization of carbon nanotube reinforced epoxy adhesives, Mater. Des., 59, 19, 10.1016/j.matdes.2014.02.034

Sancaktar, 2011, Nanocomposite adhesives: mechanical behavior with nanoclay, Int. J. Adhes. Adhes., 31, 286, 10.1016/j.ijadhadh.2010.09.006

Aradhana, 2018, High performance epoxy nanocomposite adhesive: effect of nanofillers on adhesive strength, curing and degradation kinetics, Int. J. Adhes. Adhes., 84, 238, 10.1016/j.ijadhadh.2018.03.013

Wang, 2008, The effects of CNT alignment on electrical conductivity and mechanical properties of SWNT/epoxy nanocomposites, Compos. Sci. Technol., 68, 1644, 10.1016/j.compscitech.2008.02.024

Tang, 2014, Electrically conductive rubbery epoxy/diamine-functionalized graphene nanocomposites with improved mechanical properties, Compos. Part B: Eng., 67, 564, 10.1016/j.compositesb.2014.08.013

Tomasi, 2018, Electrical, thermal, and tensile properties of cycloaliphatic epoxy/carbon black and cycloaliphatic epoxy/fumed silica nanocomposites, 0906

Tuncer, 2006, Electrical properties of epoxy resin based nano-composites, Nanotechnology, 18, 025703, 10.1088/0957-4484/18/2/025703

Bhattacharya, 2001, Integral passives for next generation of electronic packaging: application of epoxy/ceramic nanocomposites as integral capacitors, Microelectron. J., 32, 11, 10.1016/S0026-2692(00)00104-X

Azeez, 2013, Epoxy clay nanocomposites–processing, properties and applications: a review, Compos. Part B: Eng., 45, 308, 10.1016/j.compositesb.2012.04.012

Njuguna, 2007, Epoxy-based fibre reinforced nanocomposites, Adv. Eng. Mater., 9, 835, 10.1002/adem.200700118

Jin, 2015, Synthesis and application of epoxy resins: a review, J. Ind. Eng. Chem., 29, 1, 10.1016/j.jiec.2015.03.026

Guo, 2014, Preparation and mechanical properties of epoxy/diamond nanocomposites, Polym. Compos., 35, 2144, 10.1002/pc.22877

Yang, 2003, Preparation of epoxy-SiO2 hybrid sol-gel material for bone cement, J. Biomed. Mater. Res. Part A, 64, 138, 10.1002/jbm.a.10245

Shi, 2009, Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating, Surf. Coat. Technol., 204, 237, 10.1016/j.surfcoat.2009.06.048

Bagherzadeh, 2007, Preparation of epoxy-clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating, Prog. Org. Coat., 60, 117, 10.1016/j.porgcoat.2007.07.011

Ramezanzadeh, 2016, Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide, Corros. Sci., 103, 283, 10.1016/j.corsci.2015.11.033

Thakur, 2015, Self-healing polymer nanocomposite materials: a review, Polymer, 69, 369, 10.1016/j.polymer.2015.04.086

Qing, 2010, Epoxy-silicone filled with multi-walled carbon nanotubes and carbonyl iron particles as a microwave absorber, Carbon, 48, 4074, 10.1016/j.carbon.2010.07.014

Camino, 2005, Thermal and combustion behaviour of layered silicate-epoxy nanocomposites, Polym. Degrad. Stab., 90, 354, 10.1016/j.polymdegradstab.2005.02.022

Vergnaud, 2012

Jouyandeh, 2018, Surface engineering of nanoparticles with macromolecules for epoxy curing: development of super-reactive nitrogen-rich nanosilica through surface chemistry manipulation, Appl. Surf. Sci., 447, 152, 10.1016/j.apsusc.2018.03.197

Nonahal, 2018, Design, preparation, and characterization of fast cure epoxy/amine-functionalized graphene oxide nanocomposites, Polym. Compos., 39, E2016, 10.1002/pc.24415

Jouyandeh, 2016, High-performance epoxy-based adhesives reinforced with alumina and silica for carbon fiber composite/steel bonded joints, J. Reinf. Plast. Compos., 35, 1685, 10.1177/0731684416665248

Ghaffari, 2016, Demonstration of epoxy/carbon steel interfacial delamination behavior: electrochemical impedance and X-ray spectroscopic analyses, Corros. Sci., 102, 326, 10.1016/j.corsci.2015.10.024

Bahlakeh, 2017, Appl. Surf. Sci., 419, 650, 10.1016/j.apsusc.2017.05.070

Saeb, 2013, Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: a review, Sci. World J., 2013, 10.1155/2013/703708

Saeb, 2015, Highly curable epoxy/MWCNTs nanocomposites: an effective approach to functionalization of carbon nanotubes, Chem. Eng. J., 259, 117, 10.1016/j.cej.2014.07.116

Sari, 2018, Epoxy/starch-modified nano-zinc oxide transparent nanocomposite coatings: a showcase of superior curing behavior, Prog. Org. Coat., 115, 143, 10.1016/j.porgcoat.2017.11.016

Keramatinia, 2017, Synthesis and viscoelastic properties of acrylated hyperbranched polyamidoamine UV-curable coatings with variable microstructures, Prog. Org. Coat., 113, 151, 10.1016/j.porgcoat.2017.09.005

Sari, 2018, An attempt to mechanistically explain the viscoelastic behavior of transparent epoxy/starch-modified ZnO nanocomposite coatings, Prog. Org. Coat., 119, 171, 10.1016/j.porgcoat.2018.02.016

Puglia, 2017, Cure kinetics of epoxy/MWCNTs nanocomposites: isothermal calorimetric and rheological analyses, Prog. Org. Coat., 108, 75, 10.1016/j.porgcoat.2017.04.005

Saeb, 2017, Cure kinetics of epoxy/MWCNTs nanocomposites: nonisothermal calorimetric and rheokinetic techniques, J. Appl. Polym. Sci., 134, 45221, 10.1002/app.45221

Kaffashi, 2012, Improving rheological properties of covalently MWCNT/epoxy nanocomposites via surface re-modification, Polym. Bull., 68, 2187, 10.1007/s00289-012-0707-0

Yarahmadi, 2018, Development and curing potential of epoxy/starch-functionalized graphene oxide nanocomposite coatings, Prog. Org. Coat., 119, 194, 10.1016/j.porgcoat.2018.03.001

Jouyandeh, 2019, ‘Cure Index’ for thermoset composites, Prog. Org. Coat., 127, 429, 10.1016/j.porgcoat.2018.11.025

Rosso, 2007, Epoxy/silica nanocomposites: nanoparticle-induced cure kinetics and microstructure, Macromol. Rapid Commun., 28, 121, 10.1002/marc.200600588

Bignotti, 2011, Effect of the resin/hardener ratio on curing, structure and glass transition temperature of nanofilled epoxies, Polym. Compos., 32, 1034, 10.1002/pc.21120

Zabihi, 2012, Isothermal curing behavior and thermo-physical properties of epoxy-based thermoset nanocomposites reinforced with Fe2O3 nanoparticles, Thermochim. Acta, 527, 190, 10.1016/j.tca.2011.10.026

Hong, 2001, The adsorption and curing behaviors of the epoxy/amidoamine system in the presence of metal oxides, J. Therm. Anal. Calorim., 63, 31, 10.1023/A:1010119900035

Choi, 2009, Curing behavior and properties of epoxy nanocomposites with amine functionalized multiwall carbon nanotubes, Polym. Compos., 30, 415, 10.1002/pc.20571

Hussain, 2007, Epoxy-silicate nanocomposites: cure monitoring and characterization, Mater. Sci. Eng. A, 445, 467, 10.1016/j.msea.2006.09.071

Jouyandeh, 2019, Curing epoxy resin with anhydride in the presence of halloysite nanotubes: the contradictory effects of filler concentration, Prog. Org. Coat., 126, 129, 10.1016/j.porgcoat.2018.10.007

Gojny, 2005, Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—a comparative study, Compos. Sci. Technol., 65, 2300, 10.1016/j.compscitech.2005.04.021

Bhushan, 2014

Rafiee, 2009, Enhanced mechanical properties of nanocomposites at low graphene content, ACS Nano, 3, 3884, 10.1021/nn9010472

Rafiee, 2010, Fracture and fatigue in graphene nanocomposites, Small, 6, 179, 10.1002/smll.200901480

Zhang, 2014, Viscoelastic damping behaviour of cup stacked carbon nanotube modified epoxy nanocomposites with tailored interfacial condition and re-agglomeration, Compos. Sci. Technol., 105, 66, 10.1016/j.compscitech.2014.09.020

Sahoo, 2010, Polymer nanocomposites based on functionalized carbon nanotubes, Prog. Polym. Sci., 35, 837, 10.1016/j.progpolymsci.2010.03.002

Liu, 2009, Comparison of covalently and noncovalently functionalized carbon nanotubes in epoxy, Macromol. Rapid Commun., 30, 627, 10.1002/marc.200800778

Špitalský, 2009, Effect of oxidation treatment of multiwalled carbon nanotubes on the mechanical and electrical properties of their epoxy composites, Compos. Part A: Appl. Sci. Manuf., 40, 778, 10.1016/j.compositesa.2009.03.008

Wang, 2003, Study of the exfoliation process of epoxy-clay nanocomposites by different curing agents, J. Appl. Polym. Sci., 90, 511, 10.1002/app.12689

Lan, 2002, Mechanism of clay tactoid exfoliation in epoxy-clay nanocomposites, Chem. Mater., 7, 2144, 10.1021/cm00059a023

Chen, 2008, Highly dispersed nanosilica–epoxy resins with enhanced mechanical properties, Polymer, 49, 3805, 10.1016/j.polymer.2008.06.023

Ramezanzadeh, 2010, Effect of ZnO nanoparticles on the thermal and mechanical properties of epoxy-based nanocomposite, J. Therm. Anal. Calorim., 103, 731, 10.1007/s10973-010-0996-1

Gu, 2016, An overview of multifunctional epoxy nanocomposites, J. Mater. Chem. C, 4, 5890, 10.1039/C6TC01210H

Paipetis, 2012

Monetta, 2015, Graphene/epoxy coating as multifunctional material for aircraft structures, Aerospace, 2, 423, 10.3390/aerospace2030423

Mittal, 2008, Epoxy-vermiculite nanocomposites as gas permeation barrier, J. Compos. Mater., 42, 2829, 10.1177/0021998308096954

Atta, 2015, Application of magnetite nano-hybrid epoxy as protective marine coatings for steel, RSC Adv., 5, 101923, 10.1039/C5RA20730D

Yeh, 2006, Siloxane-modified epoxy resin–clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach, Surf. Coat. Technol., 200, 2753, 10.1016/j.surfcoat.2004.11.008

Mostafaei, 2013, Preparation and characterization of a novel conducting nanocomposite blended with epoxy coating for antifouling and antibacterial applications, J. Coat. Technol. Res., 10, 679, 10.1007/s11998-013-9487-1

Liu, 2014, Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin, Compos. Sci. Technol., 90, 40, 10.1016/j.compscitech.2013.10.012

Hong, 2014, Enhanced mechanical, thermal and flame retardant properties by combining graphene nanosheets and metal hydroxide nanorods for acrylonitrile–butadiene–styrene copolymer composite, Compos. Part A: Appl. Sci. Manuf., 64, 203, 10.1016/j.compositesa.2014.04.015

Vahabi, 2018, Flame retardant epoxy/halloysite nanotubes nanocomposite coatings: exploring low-concentration threshold for flammability compared to expandable graphite as superior fire retardant, Prog. Org. Coat., 119, 8, 10.1016/j.porgcoat.2018.02.005

Vahabi, 2018, Short-lasting fire in partially and completely cured epoxy coatings containing expandable graphite and halloysite nanotube additives, Prog. Org. Coat., 123, 160, 10.1016/j.porgcoat.2018.07.014

Vahabi, 2017, Novel nanocomposites based on poly (ethylene-co-vinyl acetate) for coating applications: the complementary actions of hydroxyapatite, MWCNTs and ammonium polyphosphate on flame retardancy, Prog. Org. Coat., 113, 207, 10.1016/j.porgcoat.2017.08.009