Analytical model for force prediction when machining metal matrix composite

Brun MK, Lee M. Wear characteristics of various hard materials for machining SiC reinforced aluminium alloy. The American Society of Mechanical Engineering, Int. Conf. Wear of Mater., Vancouver Canada. 14.4.18.4.1988, S.539–44. Chandrasekaran, 1977, Influence of flank wear on the stresses in a cutting tool, Trans. ASME Davim, 2003, Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays, J.Mater.Process.Technol., 132, 340, 10.1016/S0924-0136(02)00946-9 Kishawy, 2004, An energy based analytical force model for orthogonal cutting of metal matrix composites, CIRP Ann. Manuf. Technol., 53, 91, 10.1016/S0007-8506(07)60652-0 Pramanik, 2008, Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation, Int. J. Mach. Tools Manuf., 48, 1613, 10.1016/j.ijmachtools.2008.07.008 Dabade, 2009, Modeling of chip–tool interface friction to predict cutting forces in machining of Al/SiCp composites, Int. J. Mach. Tools Manuf., 49, 690, 10.1016/j.ijmachtools.2009.03.003 Hung, 1998, Chip formation in machining particle-reinforced metal matrix composites, Mater. Manuf. Process, 13, 85, 10.1080/10426919808935221 El-Gallab, 1998, Machining of Al/SiC particulate metal-matrix composites: Part I: tool performance, J. Mater. Process. Technol., 83, 151, 10.1016/S0924-0136(98)00054-5 Lin, 1998, Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites, Compos. Sci.Technol., 58, 285, 10.1016/S0266-3538(97)00126-7 Johnson GR, Cook WH, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proc. 7th Int. Symp. Ball. Hague, The Netherlands. (1983) 541–547. Oxley, 1989 Kronenberg, 1966 Colwell, 1954, Predicting the angle of chip flow for single-point cutting tool, Trans. ASME, 76, 199 Sahin, 2004, The effect of Al2O3, TiN and TiC, N-based CVD coatings on tool wear in machining metal matrix composites, Surf. Coat. Technol., 179, 349, 10.1016/S0257-8972(03)00802-8 Li, 2001, Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites, Wear, 247, 161, 10.1016/S0043-1648(00)00524-X Jiang, 1998, Modelling of two-body abrasive wear under multiple contact conditions, Wear, 217, 35, 10.1016/S0043-1648(98)00161-6 Venkatachalam, 2007, Effects of Ploughing forces and friction coefficient in microscale machining, J. Manuf. Sci. Eng., 129, 274, 10.1115/1.2673449 Sin, 1979, Abrasive wear mechanisms and the grit size effect, Wear, 55, 163, 10.1016/0043-1648(79)90188-1 Waldorf, 2006, A simplified model for ploughing forces in turning, J. Manufac. Processes, 8, 76, 10.1016/S1526-6125(07)00005-9 Fang, 2005, A new quantitative sensitivity analysis of the flow stress of 18 Engineering materials in machining, Trans. ASME, J. Eng. Mater. Technol., 127, 192, 10.1115/1.1857935 Whitney, 1994