Investigation on the changes of pressure and temperature in high pressure filling of hydrogen storage tank

Ciatti, 2007, Establishing combustion temperature in a hydrogen-fuelled engine using spectroscopic measurements, Proc. Inst. Mech. Eng. - Part D J. Automob. Eng., 221, 699, 10.1243/09544070JAUTO399 Li, 2019, Review on the research of hydrogen storage system fast refueling in fuel cell vehicle, Int. J. Hydrogen Energy, 44, 10677, 10.1016/j.ijhydene.2019.02.208 Xiao, 2016, Charge-discharge cycle thermodynamics for compression hydrogen storage system, Int. J. Hydrogen Energy, 12, 5531, 10.1016/j.ijhydene.2015.12.136 Verhelst, 2007, A comprehensive overview of hydrogen engine design features, Proc. Inst. Mech. Eng. - Part D J. Automob. Eng., 221, 911, 10.1243/09544070JAUTO141 Wellnitz, 2008, Hydrogen storage systems for automotive applications: project Storhy, Int. J. Sustain. Des, 1, 93 Tomioka, 2011, Influence of temperature on the fatigue strength of compressed-hydrogen tanks for vehicles, Int. J. Hydrogen Energy, 36, 2513, 10.1016/j.ijhydene.2010.04.120 Reddi, 2014, Hydrogen refueling station compression and storage optimization with tube-trailer deliveries, Int. J. Hydrogen Energy, 39, 19169, 10.1016/j.ijhydene.2014.09.099 Elgowainy, 2014, Tube-trailer consolidation strategy for reducing hydrogen refueling station costs, Int. J. Hydrogen Energy, 39, 20197, 10.1016/j.ijhydene.2014.10.030 Rothuizen, 2013, Optimization of hydrogen vehicle refueling via dynamic simulation, Int. J. Hydrogen Energy, 38, 4221, 10.1016/j.ijhydene.2013.01.161 Rothuizen, 2013 Rothuizen, 2014, Optimization of the overall energy consumption in cascade fueling stations for hydrogen vehicles, Int. J. Hydrogen Energy, 39, 582, 10.1016/j.ijhydene.2013.10.066 Matsuno, 2011, Attained temperature during gas fuelling and defueling cycles of compressed hydrogen tanks for FCV.2011 Melideo, 2015, CFD analysis of fast filling strategies for hydrogen tanks and their effects on key-parameters, Int. J. Hydrogen Energy, 40, 735, 10.1016/j.ijhydene.2014.10.138 Heitsch, 2011, Numerical investigations on the fast filling of hydrogen tanks, Int. J. Hydrogen Energy, 36, 2606, 10.1016/j.ijhydene.2010.04.134 Acosta-Iborra, 2011, Hydrogen tank filling experiments at the JRC-IE GASTEF facility Galassi, 2011, Validation of CFD models for hydrogen fast filling simulations Wang, 2018, Research on the design of hydrogen supply system of 70 MPa hydrogen storage cylinder for vehicles, Int. J. Hydrogen Energy, 43, 19189, 10.1016/j.ijhydene.2018.08.138 Monde, 2012, Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressures of 35 and 70 MPa, Int. J. Hydrogen Energy, 7, 5723, 10.1016/j.ijhydene.2011.12.136 Liu, 2020, Numerical study on the fast filling of on-bus gaseous hydrogen storage cylinder, Int. J. Hydrogen Energy, 45, 9241, 10.1016/j.ijhydene.2020.01.033 Li, 2020, A theoretical analysis of temperature rise of hydrogen in high-pressure storage cylinder during fast filling process, Adv. Mech. Eng., 12, 10.1177/1687814020971920 Li, 2012, Effects of geometry and inconstant mass flow rate on temperatures within a pressurized hydrogen cylinder during refueling, Int. J. Hydrogen Energy, 37, 6043, 10.1016/j.ijhydene.2011.12.020 Li, 2020, A study on the prediction of the temperature and mass of hydrogen gas inside a tank during fast filling process, Energies, 13, 6428, 10.3390/en13236428 Suryan, 2013, Numerical analysis on thermo-fluid dynamic behavior of hydrogen gas during fast high pressure filling, J. Mech. Sci. Technol., 27, 567, 10.1007/s12206-012-1233-6 Melideo, 2019, Effects of some key-parameters on the thermal stratification in hydrogen tanks during the filling process, Int. J. Hydrogen Energy, 44, 13569, 10.1016/j.ijhydene.2019.03.187 Suryan, 2013, Comparative study of turbulence models performance for refueling of compressed hydrogen tanks, Int. J. Hydrogen Energy, 38, 9562, 10.1016/j.ijhydene.2012.07.055 Zheng, 2013, Experimental and numerical study on temperature rise within a 70 MPa type III tank during fast refueling, Int. J. Hydrogen Energy, 38, 10956, 10.1016/j.ijhydene.2013.02.053 Wang, 2015, Thermo-mechanical investigation of composite high-pressure hydrogen storage cylinder during fast filling, Int. J. Hydrogen Energy, 40, 6853, 10.1016/j.ijhydene.2015.04.018