A model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu alloys
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science - Tập 34 - Trang 899-911 - 2003
Tóm tắt
A physically based model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu (7xxx series) alloys is presented. The model includes calculations of the η- and the S-phase solvus (using a regular-solution model), taking account of the capillary effect and η coarsening. It takes account of the conductivity of grains (incorporating dissolved alloying elements, undissolved particles, and precipitates) and solute-depleted areas at the grain boundaries. Data from optical microscopy, differential scanning calorimetry (DSC), scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometry (EDS), and transmission electron microscopy (TEM) are consistent with the model and its predictions. The model has been successfully used to fit and predict the conductivity data of a set of 7xxx alloys including both Zr-containing alloys and Cr-containing alloys under various aging conditions, achieving an accuracy of about 1 pct in predicting unseen conductivity data from this set of alloys.
Tài liệu tham khảo
I.J. Polmear: Light Alloys—Metallurgy of the Light Metals, 3rd ed., St. Edmundsbury Press Ltd., Bury St Edmunds, Suffolk, United Kingdom, 1995.
B. Sarkar, M. Marek, and E.A. Starke: Metall. Trans. A, 1981, vol. 12A, pp. 1939–43.
T.C. Tsai and T.H. Chuang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2617–27.
T.C. Tsai, J.C. Chuang, and T.H. Chuang: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2113–21.
W. Hepples: Ph.D. Thesis, University of Newcastle Upon Tyne, United Kingdom, 1987.
T.C. Tsai and T.H. Chuang: Corrosion, 1996, vol. 6, pp. 414–16.
J.R. Davis: Aluminium and Aluminium Alloys, ASM Specialty Handbook, 3rd ed., ASM INTERNATIONAL, Materials Park, OH, 1993.
J.K. Park and A.J. Ardell: Acta Metall. Mater., 1991, vol. 39, pp. 591–98.
D.H. Bratland, O. Grong, H. Shercliff, O.R. Myhr, and S. Tjotta: Acta Mater., 1997, vol. 45, pp. 1–22.
P. Guyot and L. Cottignies: Acta Mater., 1996, vol. 44, pp. 4161–67.
R.C. Dorward: Mater. Sci. Technol., 1999, vol. 15, pp. 1133–38.
O.P. Femminella, M.J. Starink, M. Brown, I., Sinclair, C.J. Harris, and P.A.S. Reed: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 1027–37.
O.P. Femminella, M.J. Starink, S.R. Gunn, C.J. Harris, and P.A.S. Reed: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1255–60.
F.L. Cumbrera and F. Sanchez-Bajo: Thermochim. Acta, 1995, vol. 266, pp. 315–30.
R.W. Cahn, P. Haasen, and E.J. Kramer: Materials Science and Technology—Structure and Properties of Nonferrous Alloys, VCH Publishers Inc., New York, 1996.
A. Deschamps, F. Livet, and Y. Brechet: Acta Mater., 1998, vol. 47, pp. 281–92.
A. Deschamps and Y. Brechet: Acta Mater., 1998, vol. 47, pp. 293–305.
C.H.J. Davies, N. Raghunathan, and T. Sheppard: Acta Metall. Mater., 1994, vol. 42, pp. 309–18.
J.A. Wert: Scripta Metall., 1981, vol. 15, pp. 445–47.
S.K. Maloney, K. Hono, I.J. Polmear, and S.P. Ringer: Scripta Mater., 1999, vol. 41, pp. 1031–38.
A. Deschamps, Y. Brechet, P. Guyot, and F. Livet: Z. Metallkd., 1997, vol. 88, pp. 601–06.
X. Li and M.J. Starink: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1071–76.
R. Machler, P.J. Uggowitzer, C. Solenthaler, R.M. Pedrazzoli, and M.O. Speidel: J. Inst. Met., 1990, pp. 447–51.
J.E. Hatch: Aluminium: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1983.
P. Olafsson, R. Sandstrom, and A. Karlsson: Mater. Sci. Forum., 1996, vols. 217–222, pp. 981–86.
R.H. Brown and L.A. Willey: in Aluminium, K.R. Van Horn, ed., ASM, Metals Park, OH, 1967, vol. 1.
X. Li and M.J. Starink: Mater. Sci. Technol., 2001, vol. 17, pp. 1324–28.
L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworth & Co. Ltd, London, 1976.
M.J. Starink: J. Mater. Sci., 2001, vol. 36, pp. 4433–41.
M.J. Starink, L.M.P. Starink, and A.R. Chambers: J. Mater. Sci., 2002, vol. 37, pp. 287–94.
A.J. Morris, R.F. Robey, P.D. Couch, and E.D.L. Rios: Mater. Sci. Forum, 1997, vol. 242, pp. 181–86.
T.J. Warner, R.A. Shahani, P. Lassince, and G.M. Raynaud: 3rd ASM Conf. on Synthesis, Processing and Modelling of Advanced Materials, Paris, 1997.
H. Liang, S.L. Chen, and Y.A. Chang, Metall. Mater. Trans. A, vol. 28, 1997, pp. 1725–34.
P. Liang, T. Tarfa, J.A. Robinson, S. Wagner, P. Ochin, M.G. Harmelin, H.J. Seifert, H.L. Lukas, and F. Aldinger: Thermochim. Acta., 1998, vol. 314, pp. 87–110.
P. Villars, A. Prince, and H. Okamoto: ASM Handbook of Ternary Alloy Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995.
X. Li: Ph.D. thesis, University of Southampton, Southampton 2002.
M.J. Starink and P.J. Gregson: Scripta Metall. Mater., 1995, vol. 33, pp. 893–900.
M.J. Starink and P.J. Gregson: Mater. Sci. Forum, 1996, vols. 217–222, pp. 673–78.
D.J. Strawbridge, W. Hume-Rothery, and A.T. Little: J. Inst. Met., 1948, vol. 74, p. 191.
L. Rayleigh: Phil. Mag., 1892, vol. 34, p. 481.
M. Gupta, G. Karunasiri, and M.O. Lai: Mater. Sci. Eng. A., 1996, vol. A219, pp. 133–41.
A. Bigot, F. Danoix, P. Auger, D. Blavette, and A. Reeves: Mater. Sci. Forum, 1996, vols. 217–222, pp. 695–700.
K. Stiller, P.J. Warren, V. Hansen, J. Angenette, and J. Gjønnes: Mater. Sci. Eng., 1999, vol. A270, pp. 55–36.
A. Deschamps, A. Bigot, F. Livet, P. Auger, Y. Brechet, and D. Blavette: Phil. Mag., 2001, vol. 81, pp. 2391–2414.
X.Z. Li, V. Hansen, J. Gjonnes, and L.R. Wallenberg: Acta Mater., 1999, vol. 47, pp. 2651–59.
M.J. Starink, I. Sinclair, P.A.S. Reed, and P.J. Gregson: Mater. Sci. Forum, 2000, vols. 331–337, pp. 97–110.
R. Poduri and L.-Q. Chen: Acta Mater., 1998, vol. 46, pp. 3915–28.
M.J. Starink and A.M. Zahra: Thermochim. Acta, 1997, vol. 292, pp. 159–68.
M.J. Starink and A.M. Zahra: Phil. Mag., 1998, vol. A77, pp. 187–99.
M.J. Starink and A.M. Zahra: Acta Mater., 1998, vol. 46, pp. 3381–97.
N. Kamp, I. Sinclair, and M.J. Starink: Metall. Mater. Trans. A, 2001, vol. 33A, pp. 1125–36
J.K. Park and A.J. Ardell: Metall. Trans. A., 1983, vol. 14A, pp. 1957–65.
A. Deschamps and Y. Brechet: Scripta Mater., 1998, vol. 39, pp. 1517–22.
M. Kanno, I. Iraki, and Q. Cui: Mater. Sci. Technol., 1994, vol. 10, pp. 599–603.
A.K. Mukhopadhyay, G.J. Shiflet, and E.A. Starke, Jr.: Scripta Metall. Mater., 1990, vol. 24, p. 307.
ASM Specialty Handbook: Aluminum and Aluminum Alloys, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1993.