Using Discrete Element method (DEM) simulations to reveal the differences in the γ-Al2O3 to α-Al2O3 mechanically induced phase transformation between a planetary ball mill and an attritor mill

Al’myasheva, 2005, Preparation of nanocrystalline alumina under hydrothermal conditions, Inorg. Mater., 41, 460, 10.1007/s10789-005-0152-7

Alex, 2014, Mechanically induced reactivity of gibbsite: Part 1. Planetary milling, Powder Technol., 264, 105, 10.1016/j.powtec.2014.05.028

Baláž, 2013, Hallmarks of mechanochemistry: from nanoparticles to technology, Chem. Soc. Rev., 42, 7571, 10.1039/c3cs35468g

Baláž, 2009, Fine milling in applied mechanochemistry, Miner. Eng., 22, 681, 10.1016/j.mineng.2009.01.014

Blair, 2014, The scalability in the mechanochemical syntheses of edge functionalized graphene materials and biomass-derived chemicals, Faraday Discuss., 10.1039/C4FD00007B

Blonski, 1993, Molecular dynamics simulations of α-alumina and γ-alumina surfaces, Surf. Sci., 295, 263, 10.1016/0039-6028(93)90202-U

Boldyrev, 1993, Mechanochemistry and mechanical activation of solids, Solid State Ionics, 63–65, 537, 10.1016/0167-2738(93)90157-X

Boumaza, 2009, Transition alumina phases induced by heat treatment of boehmite: An X-ray diffraction and infrared spectroscopy study, J. Solid State Chem., 182, 1171, 10.1016/j.jssc.2009.02.006

Buerger, 1961, Polymorphism and phase transformations., 39

Busca, 2014, Chapter three - structural, surface, and catalytic properties of aluminas, 319, 10.1016/B978-0-12-800127-1.00003-5

Chandran, 2019, Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters, Chem. Soc. Rev., 48, 134, 10.1039/C8CS00321A

Chauruka, 2015, Effect of mill type on the size reduction and phase transformation of gamma alumina, Chem. Eng. Sci., 134, 774, 10.1016/j.ces.2015.06.004

Chen, 2018, Enhanced performance arising from low-temperature preparation of α-alumina membranes via titania doping assisted sol-gel method, J. Membr. Sci., 559, 19, 10.1016/j.memsci.2018.04.032

Cleary, 1998, Predicting charge motion, power draw, segregation and wear in ball mills using discrete element methods, Miner. Eng., 11, 1061, 10.1016/S0892-6875(98)00093-4

Cleary, 2001, Charge behaviour and power consumption in ball mills: sensitivity to mill operating conditions, liner geometry and charge composition, Int. J. Miner. Process., 63, 79, 10.1016/S0301-7516(01)00037-0

Cleary, 2011, Understanding fine ore breakage in a laboratory scale ball mill using DEM, Miner. Eng., 24, 352, 10.1016/j.mineng.2010.12.013

Cundall, 1979, A discrete numerical model for granular assemblies, Géotechnique., 29, 47, 10.1680/geot.1979.29.1.47

Daraio, 2019, Investigating grinding media dynamics inside a vertical stirred mill using the discrete element method: effect of impeller arm length, Powder Technol.

Daraio, 2019, Validation of a Discrete Element Method (DEM) model of the grinding media dynamics within an attritor mill using positron emission particle tracking (PEPT) measurements, Appl. Sci., 9, 10.3390/app9224816

Duevel, 2011, Mechanically induced phase transformation of γ-Al2O3 into α-Al2O3. Access to structurally disordered γ-Al2O3 with a controllable amount of pentacoordinated Al sites, J. Phys. Chem. C, 115, 22770, 10.1021/jp206077r

Jayasundara, 2012, Effect of the size of media on grinding performance in stirred mills, Miner. Eng., 33, 66, 10.1016/j.mineng.2011.10.012

Kano, 2000, Application of dry grinding to reduction in transformation temperature of aluminum hydroxides, Int. J. Miner. Process., 60, 91, 10.1016/S0301-7516(00)00005-3

Karouia, 2016, The impact of nanocrystallite size and shape on phase transformation: application to the boehmite/alumina transformation, Adv. Powder Technol., 27, 1814, 10.1016/j.apt.2016.06.014

Kwade, A., Schwedes, J., 2007. Wet Grinding in Stirred Media Mills. In: Salman, A.D., Ghadiri, M., Hounslow, M.J. (Eds.), Handbook of Powder Technology. Elsevier Science B.V., pp. 251–382. https://doi.org/10.1016/S0167-3785(07)12009-1 (Chapter 6).

Lamouri, 2017, Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification, Boletín de La Sociedad Española de Cerámica y Vidrio, 56, 47, 10.1016/j.bsecv.2016.10.001

Laubengayer, 1943, A hydrothermal study of equilibria in the system alumina—water1, J. Am. Chem. Soc., 65, 247, 10.1021/ja01242a031

Lee, 2019, Effect of number and properties of specific sites on alumina surfaces for Pt-Al2O3 catalysts, Appl. Catal. A, 569, 8, 10.1016/j.apcata.2018.10.004

Li, 1993, Evaluation o biocompatibility of various ceramic powders with human fibroblasts in vitro, Clin. Mater., 12, 197, 10.1016/0267-6605(93)90073-G

Lv, 2019, Preparation of low-shrinkage and high-performance alumina ceramics via incorporation of pre-sintered alumina powder based on Isobam gelcasting, Ceram. Int., 45, 11654, 10.1016/j.ceramint.2019.03.039

Marigo, 2013, Application of positron emission particle tracking (PEPT) to validate a Discrete Element Method (DEM) model of granular flow and mixing in the Turbula mixer, Int. J. Pharm., 446, 46, 10.1016/j.ijpharm.2013.01.030

McHale, 1997, Surface energies and thermodynamic phase stability in nanocrystalline aluminas, Science, 277, 788, 10.1126/science.277.5327.788

Michálek, 2018, Strength of pure alumina ceramics above 1GPa, Ceram. Int., 44, 3255, 10.1016/j.ceramint.2017.11.098

Mucsi, 2019, A review on mechanical activation and mechanical alloying in stirred media mill, Chem. Eng. Res. Des., 10.1016/j.cherd.2019.06.029

Naga, 2019, Characterization of physico- mechanical properties of Alumina/YAG/Ceria composites, Ceram. Int., 45, 1634, 10.1016/j.ceramint.2018.10.040

Panchula, 1997, Mechanical synthesis of nanocrystalline α-Al2O3 seeds for enhanced transformation kinetics, Nanostruct. Mater., 9, 161, 10.1016/S0965-9773(97)00043-3

Pantaleev, 2017, An experimentally validated DEM study of powder mixing in a paddle blade mixer, Powder Technol., 311, 287, 10.1016/j.powtec.2016.12.053

Powell, 2008, Applying DEM outputs to the unified comminution model, Miner. Eng., 21, 744, 10.1016/j.mineng.2008.06.010

Prziwara, 2018, Impact of the powder flow behavior on continuous fine grinding in dry operated stirred media mills, Miner. Eng., 128, 215, 10.1016/j.mineng.2018.08.032

Ruys, A., 2019. 4 - Processing, structure, and properties of alumina ceramics. In: Ruys, A. (Ed.), Alumina Ceramics. Woodhead Publishing, pp. 71–121. https://doi.org/10.1016/B978-0-08-102442-3.00004-X.

Saalfeld, 1958, The dehydration of gibbsite and the structure of a tetragonal γ—Al2O3, Clay Min. Bull., 3, 249, 10.1180/claymin.1958.003.19.08

Sadrai, 2011, Energy efficient comminution under high velocity impact fragmentation, Miner. Eng., 24, 1053, 10.1016/j.mineng.2011.05.006

Schaper, 1984, A quantitative investigation of the phase transformation of gamma to alpha alumina with high temperature DTA, Thermochim. Acta, 77, 383, 10.1016/0040-6031(84)87077-X

Shi, 2015, DEM investigation of weathered rocks using a novel bond contact model, J. Rock Mech. Geotech. Eng., 7, 327, 10.1016/j.jrmge.2015.01.005

Sing, 1982, Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity, Pure Appl. Chem., 54, 2201, 10.1351/pac198254112201

Sinnott, 2006, Analysis of stirred mill performance using DEM simulation: Part 1– media motion, energy consumption and collisional environment, Miner. Eng., 19, 1537, 10.1016/j.mineng.2006.08.012

Stender, 2004, Stress energy distribution in different stirred media mill geometries, Int. J. Miner. Process., 74, S103, 10.1016/j.minpro.2004.07.003

Suryanarayana, 2001, Mechanical alloying and milling, Prog. Mater Sci., 46, 1, 10.1016/S0079-6425(99)00010-9

Takahashi, 2017, Influence of addition of functionalized alumina particles on CO2 stripping from amine solvents, Energy Procedia, 114, 2024, 10.1016/j.egypro.2017.03.1336

Tateishi, 1993, Research and development of alumina and zirconia artificial hip joint, Clin. Mater., 12, 219, 10.1016/0267-6605(93)90076-J

Terzić, 2014, Assessment of intensive grinding effects on alumina as refractory compound: acceleration of γ to α phase transformation mechanism, Ceram. Int., 40, 14851, 10.1016/j.ceramint.2014.06.080

Tomac, 2017, Coupled hydro-thermo-mechanical modeling of hydraulic fracturing in quasi-brittle rocks using BPM-DEM, J. Rock Mech. Geotech. Eng., 9, 92, 10.1016/j.jrmge.2016.10.001

Trivino, 2015, Assessment of crack initiation and propagation in rock from explosion-induced stress waves and gas expansion by cross-hole seismometry and FEM–DEM method, Int. J. Rock Mech. Min. Sci., 77, 287, 10.1016/j.ijrmms.2015.03.036

Tsuchida, 1990, Hydrothermal synthesis and characterization of diaspore, β-Al2O3 · H2O, J. Mater. Sci., 25, 4423, 10.1007/BF00581103

Wang, 2005, Phase transformation in nanometer-sized γ-alumina by mechanical milling, J. Am. Ceram. Soc., 88, 780, 10.1111/j.1551-2916.2005.00105.x

Wang, 2012, DEM investigation of energy distribution and particle breakage in tumbling ball mills, Powder Technol., 223, 83, 10.1016/j.powtec.2011.07.024

Weerasekara, 2013, The contribution of DEM to the science of comminution, Powder Technol., 248, 3, 10.1016/j.powtec.2013.05.032

Wefers, 1972

Wilkinson, 2017, A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: a discrete element method (DEM) study, Comput. Chem. Eng., 97, 161, 10.1016/j.compchemeng.2016.11.034

Wilson, 1980, A kinetic study of the system γ-AlOOHAl2O3, J. Solid State Chem., 34, 315, 10.1016/0022-4596(80)90429-6

Wu, 2019, HF/HCl acid resistance mechanisms of alumina ceramics in the Al2O3-MgO-CaO-SiO2-Y2O3 system, Ceram. Int., 45, 4455, 10.1016/j.ceramint.2018.11.124

Yamamoto, 2014, Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill, Particuology, 14, 103, 10.1016/j.partic.2013.06.002

Yan, 2016, Investigating mixing and segregation using discrete element modelling (DEM) in the Freeman FT4 rheometer, Int. J. Pharm., 513, 38, 10.1016/j.ijpharm.2016.08.065

Yang, 2003, Microdynamic analysis of particle flow in a horizontal rotating drum, Powder Technol., 130, 138, 10.1016/S0032-5910(02)00257-7

Yang, 2006, DEM simulation of the flow of grinding media in IsaMill, Miner. Eng., 19, 984, 10.1016/j.mineng.2006.05.002

Zhang, 2019, Thermal and hydrothermal stability of pure and silica-doped mesoporous aluminas, Micropor. Mesopor. Mater., 10.1016/j.micromeso.2019.04.005

Zhou, 1999, Rolling friction in the dynamic simulation of sandpile formation, Physica A, 269, 536, 10.1016/S0378-4371(99)00183-1