Morphology, rheology, and physical properties of polymer-modified asphalt binders

Carreau, 2000, The viscoelastic properties of polymer-modified asphalts, Can. J. Chem. Eng., 78, 495, 10.1002/cjce.5450780308 Isacsson, 1997, Relationships between bitumen chemistry and low temperature behaviour of asphalt, Constr. Build. Mater., 11, 83, 10.1016/S0950-0618(97)00008-1 Di Benedetto, 2004, Linear viscoelastic behaviour of bituminous materials: from binders to mixes, Road Mater. Pavement Des., 5, 163, 10.1080/14680629.2004.9689992 Khattak, 2008, Viscoelastic behavior of hydrated lime-modified asphalt matrix and hot-mix asphalt under moisture damage conditions, Transp. Res. Rec. J. Transp. Res. Board., 2057, 64, 10.3141/2057-08 Xiao, 2009, Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives, Constr. Build. Mater., 23, 3144, 10.1016/j.conbuildmat.2009.06.036 Delgadillo, 2010, The relationship between nonlinearity of asphalt binders and asphalt mixture permanent deformation, Road Mater. Pavement Des., 11, 653, 10.1080/14680629.2010.9690298 Alataş, 2012, Comparison of permanent deformation and fatigue resistance of hot mix asphalts prepared with the same performance grade binders, Constr. Build. Mater., 30, 66, 10.1016/j.conbuildmat.2011.12.021 Ameri, 2012, Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates, Constr. Build. Mater., 26, 475, 10.1016/j.conbuildmat.2011.06.047 Hasaninia, 2017, The characteristics of hot mixed asphalt modified by nanosilica, Pet. Sci. Technol., 35, 351, 10.1080/10916466.2016.1258412 J.S. Coplantz, M.T. Yapp, F.N. Finn, Review of Relationships between Modified Asphalt Properties and Pavement Performance, SHRP-A-631, 1993, p. 243. Isacsson, 1995, Testing and appraisal of polymer modified road bitumens—state of the art, Mater. Struct., 28, 139, 10.1007/BF02473221 Al-Dubabe, 1998, Polymer modification of arab asphalt, J. Mater. Civ. Eng., 10, 161, 10.1061/(ASCE)0899-1561(1998)10:3(161) Özen, 2008, Laboratory performance comparison of the elastomer-modified asphalt mixtures, Build. Environ., 43, 1270, 10.1016/j.buildenv.2007.03.010 González, 2010, Thermomechanical properties of bitumen modified with crumb tire rubber and polymeric additives, Fuel Process. Technol., 91, 1033, 10.1016/j.fuproc.2010.03.009 González, 2012, A study into the processing of bitumen modified with tire crumb rubber and polymeric additives, Fuel Process. Technol., 95, 137, 10.1016/j.fuproc.2011.11.018 Yao, 2013, Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy, Constr. Build. Mater., 38, 327, 10.1016/j.conbuildmat.2012.08.004 Behnood, 2017, Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA), Constr. Build. Mater., 151, 464, 10.1016/j.conbuildmat.2017.06.115 Behnood, 2017, Stress-dependent behavior and rutting resistance of modified asphalt binders: an MSCR approach, Constr. Build. Mater., 157, 635, 10.1016/j.conbuildmat.2017.09.138 Behnood, 2016 Behnood, 2012, Experimental investigation of stone matrix asphalt mixtures containing steel slag, Sci. Iran., 19, 1214, 10.1016/j.scient.2012.07.007 Behnood, 2016 Behnood, 2015, Effects of copper slag and recycled concrete aggregate on the properties of CIR mixes with bitumen emulsion, rice husk ash, Portland cement and fly ash, Constr. Build. Mater., 96, 172, 10.1016/j.conbuildmat.2015.08.021 Bahia, 2006, Modified asphalt binders for paving applications, 84 Sureshkumar, 2010, Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites, Eur. Polym. J., 46, 621, 10.1016/j.eurpolymj.2009.12.024 Lesueur, 1998, Polymer modified asphalts as viscoelastic emulsions, Rheology, 42, 1059, 10.1122/1.550918 Vlachovicova, 2007, Creep characteristics of asphalt modified by radial styrene–butadiene–styrene copolymer, Constr. Build. Mater., 21, 567, 10.1016/j.conbuildmat.2005.09.006 Stastna, 2003, Viscosity function in polymer-modified asphalts, J. Colloid Interface Sci., 259, 200, 10.1016/S0021-9797(02)00197-2 King, 1993, Influence of asphalt grade and polymer concentration on the low temperature performance of polymer modified asphalt, J. Assoc. Asph. Paving Technol., 62, 1 Khakimullin, 2000, Properties of bitumens modified by thermoplastic elastomers, Mech. Compos. Mater., 36, 417, 10.1023/A:1026659520096 Behnood, 2016, High temperature properties of asphalt binders: comparison of multiple stress creep recovery and performance grading systems, Transp. Res. Rec. J. Transp. Res. Board., 2574, 131, 10.3141/2574-15 Bahia, 1995, Strategic highway research program binder rheological parameters: background and compariosn with conventional properties, Transp. Res. Rec., 32–39 Becker, 2001, Polymer modified asphalt, Vis. Tecnol., 9, 39 Rostler, 1960, Influence of chemical composition of asphalts on performance, particularly durability, 64 Griffin, 1959, Influence of composition of paving asphalt on viscosity, viscosity-temperature susceptibility, and durability, J. Chem. Eng. Data., 4, 349, 10.1021/je60004a019 Petersen, 2000, Chapter 14 chemical composition of asphalt as related to asphalt durability, Dev. Pet. Sci., 40, 363 Lesueur, 2009, The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification, Adv. Colloid Interface Sci., 145, 42, 10.1016/j.cis.2008.08.011 Ait-Kadi, 1996, Polymer blends for enhanced asphalt binders, Polym. Eng. Sci., 36, 1724, 10.1002/pen.10568 Bouldin, 1991, Rheology and microstructure of polymer/asphalt blends, Rubber Chem. Technol., 64, 577, 10.5254/1.3538574 Sergeant, 1994, The effect of aging on the viscosity of bitumens produced from shale oil, Fuel Process. Technol., 37, 67, 10.1016/0378-3820(94)90006-X Wei, 1996, Characterization of asphalt binders based on chemical and physical properties, Int. J. Polym. Anal. Charact., 3, 33, 10.1080/10236669608032753 Read, 2003, 460 Errera, 1923, The sensitiveness to light of asphalt as a function of its degree of dispersion, Trans. Faraday Soc., 19, 314, 10.1039/tf9231900314 Ray, 1957, A Study of the colloidal characteristics of petroleum using the ultracentrifuge, J. Phys. Chem., 61, 1296, 10.1021/j150556a009 Zanzotto, 1996, Characterization of regular and modified bitumens via their complex modulus, J. Appl. Polym. Sci., 59, 1897, 10.1002/(SICI)1097-4628(19960321)59:12<1897::AID-APP12>3.0.CO;2-P Browarzik, 1999, Asphaltene flocculation in crude oil systems, Fluid Phase Equilib., 154, 285, 10.1016/S0378-3812(98)00434-8 Rosinger, 1914, Beiträge zur Kolloidchemie des Asphalts, Kolloid-Zeitschrift, 15, 177, 10.1007/BF01427821 F.J. Nellensteyn, Bereiding en Constitutie van Asphalt, Delft, 1923. Nellensteyn, 1924, The constitution of asphalt, J. Instit. Pet. Technol., 10, 310 Pfeiffer, 1940, Asphaltic bitumen as colloid system, J. Phys. Chem., 44, 139, 10.1021/j150398a001 Boduszynski Mieczyslaw, 2013, Asphaltenes in petroleum asphalts, Chem. Asph. Am. Chem. Soc., 119 Murgich, 1996, Molecular recognition and molecular mechanics of micelles of some model asphaltenes and resins, Energy Fuels, 10, 68, 10.1021/ef950112p Traxler, 1961, 294 Anderson, 1991, Physical properties of asphalt cement and the development of performance-related specifications, J. Assoc. Asph. Paving Technol., 60, 437 Redelius, 2006, The structure of asphaltenes in bitumen, Road Mater. Pavement Des., 7, 143, 10.1080/14680629.2006.9690062 Redelius, 2009, Asphaltenes in bitumen, what they are and what they are not, Road Mater. Pavement Des., 10, 25, 10.1080/14680629.2009.9690234 Branthaver, 1996, Relationships between molecular weights and rheological properties of asphalts, Transp. Res. Rec. J. Transp. Res. Board., 1535, 10, 10.1177/0361198196153500102 Paul Maruska, 1987, The role of polar species in the aggregation of asphaltenes, Fuel Sci. Technol. Int., 5, 119, 10.1080/08843758708915850 Yang, 2005, Asphaltenes and waxes do not interact synergistically and coprecipitate in solid organic deposits, Energy & Fuels., 19, 1360, 10.1021/ef050022c T.W. Kennedy, R.J. Cominsky, Hypothesisand models employed in the SHRP asphalt research program, SHRO-A/WP-90-008, Washington DC, 1990, 66 p. Pauli, 1996, Asphalt compatibility testing using the automated Heithaus titration test, 1276 Usmani, 1997, 544 Giavarini, 2000, Macrostructure and rheological properties of chemically modified residues and bitumens, Energy Fuels., 14, 495, 10.1021/ef9902045 Bonemazzi, 1999, Shifting the bitumen structure from sol to gel, J. Pet. Sci. Eng., 22, 17, 10.1016/S0920-4105(98)00052-7 Callister, 2012 Kumar, 2001, Biodegradable block copolymers, Adv. Drug Deliv. Rev., 53, 23, 10.1016/S0169-409X(01)00219-8 Polacco, 2015, A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility, Adv. Colloid Interface Sci., 224, 72, 10.1016/j.cis.2015.07.010 Hou, 2018, Identification of asphalt aging characterization by spectrophotometry technique, Fuel, 226, 230, 10.1016/j.fuel.2018.04.030 tur Rasool, 2017, Improving the aging resistance of SBS modified asphalt with the addition of highly reclaimed rubber, Constr. Build. Mater., 145, 126, 10.1016/j.conbuildmat.2017.03.242 Li, 2018, Variations in strength and deformation of compacted loess exposed to wetting-drying and freeze-thaw cycles, Cold Reg. Sci. Technol., 151, 159, 10.1016/j.coldregions.2018.03.021 Pérez-Lepe, 2007, High temperature stability of different polymer-modified bitumens: a rheological evaluation, J. Appl. Polym. Sci., 103, 1166, 10.1002/app.25336 M. Stroup-Gardiner, D.E. Newcomb, Polymer Literature Review, Minnesota Department of Transportation, Minneapolis, Minnesota, 1995, p. 231. Key Facts about Polymer-Modified Asphalts, BetterRoads, 1989, 39–41. Masson, 2003, Thermodynamics, phase diagrams, and stability of bitumen−polymer blends, Energy Fuels, 17, 714, 10.1021/ef0202687 Polacco, 2006, Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts, Curr. Opin. Colloid Interface Sci., 11, 230, 10.1016/j.cocis.2006.09.001 Daly, 1993, Preparation and characterization of asphalt-modified polyethylene blends, Transp. Res. Rec., 1391, 56 Brule, 1988, Paving asphalt polymer blends: relationships between composition, structure and properties, 41 Polacco, 2008, Rheological properties of asphalt/SBS/clay blends, Eur. Polym. J., 44, 3512, 10.1016/j.eurpolymj.2008.08.032 Wloczysiak, 1997, Relationships between rheological properties, morphological characteristics, and composition of bitumen–styrene butadiene styrene copolymers mixes. I. A three-phase system, J. Appl. Polym. Sci., 65, 1595, 10.1002/(SICI)1097-4628(19970822)65:8<1595::AID-APP16>3.0.CO;2-V García-Morales, 2006, Effect of waste polymer addition on the rheology of modified bitumen, Fuel, 85, 936, 10.1016/j.fuel.2005.09.015 Ho, 1997, Microstructure of triblock copolymers in asphalt oligomers, J. Polym. Sci. Part B Polym. Phys., 35, 2857, 10.1002/(SICI)1099-0488(199712)35:17<2857::AID-POLB10>3.0.CO;2-6 Engel, 1991, Synthesis and thermal stability of bitumen–polymer ionomers, J. Appl. Polym. Sci., 43, 227, 10.1002/app.1991.070430202 Gaylord, 1992, Maleation of linear low-density polyethylene by reactive processing, J. Appl. Polym. Sci., 44, 1941, 10.1002/app.1992.070441109 Yeh, 1999, Flow properties of asphalt cements by compounding with synthetic polymers, ACS Div. Fuel Chem. Prepr., 44, 1025 Nien, 2008, Investigation of flow properties of asphalt binders containing polymer modifiers, Polym. Compos., 29, 518, 10.1002/pc.20404 Jun, 2008, The research of GMA-g-LDPE modified Qinhuangdao bitumen, Constr. Build. Mater., 22, 1067, 10.1016/j.conbuildmat.2007.03.007 Singh, 2013, Polymer-modified bitumen of recycled LDPE and maleated bitumen, J. Appl. Polym. Sci., 127, 67, 10.1002/app.36810 Liang, 1993, In situ steric stabilization of polyethylene emulsions in asphalt binders for hot-mix pavement applications, Colloids Surf. A Physicochem. Eng. Asp., 81, 239, 10.1016/0927-7757(93)80251-9 Polacco, 2004, Rheology of asphalts modified with glycidylmethacrylate functionalized polymers, J. Colloid Interface Sci., 280, 366, 10.1016/j.jcis.2004.08.043 Wang, 2007, Characterization of end-functionalized styrene–butadiene–styrene copolymers and their application in modified asphalt, J. Appl. Polym. Sci., 103, 8, 10.1002/app.23867 Rojas, 2010, Rheology and microstructure of functionalized polymer-modified asphalt, J. Appl. Polym. Sci., 115, 15, 10.1002/app.28953 Nadkarni, 1985, Thermomechanical behavior of modified asphalts, Ind. Eng. Chem. Prod. Res. Dev., 24, 478, 10.1021/i300019a029 Herrington, 1999, Rheological modification of bitumen with maleic anhydride and dicarboxylic acids, Fuel, 78, 101, 10.1016/S0016-2361(98)00120-3 Singh, 2006, Bituminous polyurethane network: preparation, properties, and end use, J. Appl. Polym. Sci., 101, 217, 10.1002/app.23198 Kang, 2010, Reaction of asphalt and maleic anhydride: kinetics and mechanism, Chem. Eng. J., 164, 230, 10.1016/j.cej.2010.08.020 Singh, 2003, Use of isocyanate production waste in the preparation of improved waterproofing bitumen, J. Appl. Polym. Sci., 90, 1365, 10.1002/app.12808 Varma, 2002, Miscibility studies on blends of Kraton block copolymer and asphalt, Polymer (Guildf), 43, 4667, 10.1016/S0032-3861(02)00303-8 Isacsson, 1999, Laboratory investigations of polymer modified bitumens, 35 Haddadi, 2008, Effects of the manufacturing process on the performances of the bituminous binders modified with EVA, Constr. Build. Mater., 22, 1212, 10.1016/j.conbuildmat.2007.01.028 Airey, 2002, Rheological evaluation of ethylene vinyl acetate polymer modified bitumens, Constr. Build. Mater., 16, 473, 10.1016/S0950-0618(02)00103-4 Rahman, 2005, The mechanical properties of the dry process CRM asphalt mixtures following short-term and long-term ageing Kalantar, 2012, A review of using waste and virgin polymer in pavement, Constr. Build. Mater., 33, 55, 10.1016/j.conbuildmat.2012.01.009 Wegan, 2001, 57 Pérez-Lepe, 2003, Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen, Fuel, 82, 1339, 10.1016/S0016-2361(03)00065-6 Larsen, 2009, Micro-structural and rheological characteristics of SBS-asphalt blends during their manufacturing, Constr. Build. Mater., 23, 2769, 10.1016/j.conbuildmat.2009.03.008 Khattak, 2001, Fatigue and permanent deformation models for polymer-modified asphalt mixtures, Transp. Res. Rec. J. Transp. Res. Board., 1767, 135, 10.3141/1767-17 Navarro, 2007, Influence of processing conditions on the rheological behavior of crumb tire rubber-modified bitumen, J. Appl. Polym. Sci., 104, 1683, 10.1002/app.25800 Tan, 2013, Performance optimization of composite modified asphalt sealant based on rheological behavior, Constr. Build. Mater., 47, 799, 10.1016/j.conbuildmat.2013.05.015 Kriz, 2008, Glass transition and phase stability in asphalt binders, Road Mater. Pavement Des., 9, 37, 10.1080/14680629.2008.9690158 Lu, 1997, Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens, Constr. Build. Mater., 11, 23, 10.1016/S0950-0618(96)00033-5 Partal, 1999, Rheological characterisation of synthetic binders and unmodified bitumens, Fuel, 78, 1, 10.1016/S0016-2361(98)00121-5 Singh, 2003, Mastic of polymer-modified bitumen and poly(vinyl chloride) wastes, J. Appl. Polym. Sci., 90, 1347, 10.1002/app.12795 Fawcett, 2003, Polystyrene and asphaltene micelles within blends with a bitumen of an SBS block copolymer and styrene and butadiene homopolymers, Colloid Polym. Sci., 281, 203, 10.1007/s00396-002-0762-4 Fuentes-Audén, 2007, Formulation of new synthetic binders: thermo-mechanical properties of recycled polymer/oil blends, Polym. Test., 26, 323, 10.1016/j.polymertesting.2006.11.002 Dessouky, 2011, Effect of pre-heating duration and temperature conditioning on the rheological properties of bitumen, Constr. Build. Mater., 25, 2785, 10.1016/j.conbuildmat.2010.12.058 J.J. Breen, J.E. Stephens, The Glass Transition Temperature and the Mechanical Properties of Asphalt: in Canadian Technical Asphalt Association, 12, 1967, 137–144. Ponniah, 1996, Polymer-modified asphalt pavements in Ontario: performance and cost-effectiveness, Transp. Res. Rec., 151, 10.1177/0361198196154500120 Anderson, 1999, Physical hardening of asphalt binders relative to their glass transition temperatures, Transp. Res. Rec., 27, 10.3141/1661-05 Masson, 2002, Time-dependent microstructure of bitumen and its fractions by modulated differential scanning calorimetry, Energy Fuels, 16, 470, 10.1021/ef010233r Planche, 1998, Using thermal analysis methods to better understand asphalt rheology, Thermochim. Acta, 324, 223, 10.1016/S0040-6031(98)00539-5 Brandrup, 1999, 2336 Shivokhin, 2012, Rheological behaviour of polymer-modified bituminous mastics: a comparative analysis between physical and chemical modification, Constr. Build. Mater., 27, 234, 10.1016/j.conbuildmat.2011.07.055 Zhu, 2014, Polymer modification of bitumen: advances and challenges, Eur. Polym. J., 54, 18, 10.1016/j.eurpolymj.2014.02.005 Alataş, 2013, The effects of using Styrene-Butadiene-Styrene and fly ash together on the resistance to moisture-induced damage, permanent deformation and fatigue of hot mixture asphalt, KSCE J. Civ. Eng., 17, 1030, 10.1007/s12205-013-0404-z Kok, 2009, The effects of using lime and styrene–butadiene–styrene on moisture sensitivity resistance of hot mix asphalt, Constr. Build. Mater., 23, 1999, 10.1016/j.conbuildmat.2008.08.019 Sengoz, 2008, Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen, Constr. Build. Mater., 22, 1897, 10.1016/j.conbuildmat.2007.07.013 Masson, 2005, Glass transitions and amorphous phases in SBS–bitumen blends, Thermochim. Acta, 436, 96, 10.1016/j.tca.2005.02.017 Lu, 1998, Low-temperature properties of styrene–butadiene–styrene polymer modified bitumens, Constr. Build. Mater., 12, 405, 10.1016/S0950-0618(98)00032-4 Bonati, 2012, Ignitability and thermal stability of asphalt binders and mastics for flexible pavements in highway tunnels, Constr. Build. Mater., 37, 660, 10.1016/j.conbuildmat.2012.07.096 Mohammed, 2011, Amjad, Influence of styrene butadiene rubber on the mechanical properties of asphalt concrete mixtures, Al-Qadisiya J. Eng. Sci., 4, 364 Marasteanu, 1901, High-temperature rheological properties of asphalt binders, Transp. Res. Rec. J. Transp. Res. Board., 2005, 52 Hınıslıoğlu, 2004, Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix, Mater. Lett., 58, 267, 10.1016/S0167-577X(03)00458-0 Pérez-Lepe, 2005, Influence of polymer concentration on the microstructure and rheological properties of high-density polyethylene (HDPE)-modified Bitumen, Energy Fuels, 19, 1148, 10.1021/ef0497513 Saoula, 2009, Improvement of the performances of modified bituminous concrete with EVA and EVA-waste, Phys. Procedia, 2, 1319, 10.1016/j.phpro.2009.11.098 González, 2004, Rheology and stability of bitumen/EVA blends, Eur. Polym. J., 40, 2365, 10.1016/j.eurpolymj.2004.06.001 Ameri, 2012, Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology, Constr. Build. Mater., 36, 1001, 10.1016/j.conbuildmat.2012.04.137 Ameri, 2013, Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters, Constr. Build. Mater., 40, 438, 10.1016/j.conbuildmat.2012.09.109 Champion-Lapalu, 2001, Cryo-scanning electron microscopy: a new tool for interpretation of fracture studies in bitumen/polymer blends, Energy Fuels, 16, 143, 10.1021/ef010122s Al-Hadidy, 2009, Mechanistic approach for polypropylene-modified flexible pavements, Mater. Des., 30, 1133, 10.1016/j.matdes.2008.06.021 Casey, 2008, Development of a recycled polymer modified binder for use in stone mastic asphalt, Resour. Conserv. Recycl., 52, 1167, 10.1016/j.resconrec.2008.06.002 Kök, 2011, Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt, Constr. Build. Mater., 25, 3204, 10.1016/j.conbuildmat.2011.03.005 Tayfur, 2007, Investigation of rutting performance of asphalt mixtures containing polymer modifiers, Constr. Build. Mater., 21, 328, 10.1016/j.conbuildmat.2005.08.014 Mokhtari, 2012, Mechanistic approach for fiber and polymer modified SMA mixtures, Constr. Build. Mater., 36, 381, 10.1016/j.conbuildmat.2012.05.032 Anjan kumar, 2011, Dynamic mechanical characterization of asphalt concrete mixes with modified asphalt binders, Mater. Sci. Eng. A, 528, 6445, 10.1016/j.msea.2011.05.008 Aglan, 1993, Effect of styrene-butadiene styrene block copolymer on fatigue crack propagation behavior of asphalt concrete mixtures, Transp. Res. Rec., 1417, 178 Lundström, 2004, Linear viscoelastic and fatigue characteristics of styrene–butadiene–styrene modified asphalt mixtures, J. Mater. Civ. Eng., 16, 629, 10.1061/(ASCE)0899-1561(2004)16:6(629) Kim, 2013, Fatigue performance evaluation of SBS modified mastic asphalt mixtures, Constr. Build. Mater., 48, 908, 10.1016/j.conbuildmat.2013.07.100 Kim, 2003, Fracture toughness of polymer-modified asphalt concrete at low temperatures, Can. J. Civ. Eng., 30, 406, 10.1139/l02-101 Ho, 2005, The low temperature properties of conventional and modified asphalt binders evaluated by the failure energy and secant modulus from direct tension tests, Mater. Struct., 38, 137, 10.1007/BF02480586 Kök, 2013, Evaluation of low-temperature and elastic properties of crumb rubber– and SBS-modified bitumen and mixtures, J. Mater. Civ. Eng., 25, 257, 10.1061/(ASCE)MT.1943-5533.0000590 Iskender, 2012, Indirect performance comparison for styrene–butadiene–styrene polymer and fatty amine anti-strip modified asphalt mixtures, Constr. Build. Mater., 30, 117, 10.1016/j.conbuildmat.2011.11.027 Sengul, 2013, Evaluation of SBS modified stone mastic asphalt pavement performance, Constr. Build. Mater., 41, 777, 10.1016/j.conbuildmat.2012.12.065 Sirin, 2008, Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testing, Constr. Build. Mater., 22, 286, 10.1016/j.conbuildmat.2006.08.018 Kök, 2011, Evaluation of high temperature performance of SBS + Gilsonite modified binder, Fuel, 90, 3093, 10.1016/j.fuel.2011.05.021 de Almeida Júnior, 2012, Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil, J. Clean. Prod., 33, 236, 10.1016/j.jclepro.2012.03.039 Wen, 2002, Rheological characterization of storage-stable SBS-modified asphalts, Polym. Test., 21, 295, 10.1016/S0142-9418(01)00086-1 Oliver, 2012, The effect of SBS morphology on field performance and test results, Road Mater. Pavement Des., 13, 104, 10.1080/14680629.2011.644113 Class, 1985, The effect of modifying resins on the viscoelastic properties of styrenic block copolymers, Rubber Chem. Technol., 58, 973, 10.5254/1.3536108 Blanco, 1996, Rheological properties of styrene-butadiene copolymer–reinforced asphalt, J. Appl. Polym. Sci., 61, 1493, 10.1002/(SICI)1097-4628(19960829)61:9<1493::AID-APP9>3.0.CO;2-E Fawcett, 2001, Blends of bitumen with polymers having a styrene component, Polym. Eng. Sci., 41, 1251, 10.1002/pen.10826 Adedeji, 1996, Asphalt modified by SBS triblock copolymer: structures and properties, Polym. Eng. Sci., 36, 1707, 10.1002/pen.10567 Chen, 2002, Asphalt modified by styrene-butadiene-styrene triblock copolymer: morphology and model, J. Mater. Civ. Eng., 14, 224, 10.1061/(ASCE)0899-1561(2002)14:3(224) Chen, 2002, Evaluation and optimization of the engineering properties of polymer-modified asphalt, Pract. Fail. Anal., 2, 75, 10.1007/BF02719194 Sengoz, 2008, Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods, J. Hazard. Mater., 150, 424, 10.1016/j.jhazmat.2007.04.122 Sengoz, 2009, Morphology and image analysis of polymer modified bitumens, Constr. Build. Mater., 23, 1986, 10.1016/j.conbuildmat.2008.08.020 Lu, 2000, Modification of road bitumens with thermoplastic polymers, Polym. Test., 20, 77, 10.1016/S0142-9418(00)00004-0 Hanyu, 2005, Effect of the morphology of SBS modified asphalt on mechanical properties binder and mixture, J. East. Asia Soc. Transp. Stud., 6, 1153 Sun, 2006, Phase morphology of polymer modified road asphalt, Pet. Sci. Technol., 24, 839, 10.1081/LFT-200043780 Khattak, 1998, Engineering properties of polymer-modified asphalt mixtures, Transp. Res. Rec., 12, 10.3141/1638-02 Vural Kok, 2008, Investigation of mechanical properties of asphalt concrete containing styrene butadiene styrene, J. Eng Nat. Sci., 26, 13 Khodaii, 2009, Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test, Constr. Build. Mater., 23, 2586, 10.1016/j.conbuildmat.2009.02.015 Topal, 2011, Evaluation of rheological and image properties of styrene-butadiene-styrene and ethylene-vinyl acetate polymer modified bitumens, J. Appl. Polym. Sci., 122, 3122, 10.1002/app.34282 Kalyoncuoglu, 2011, A model for dynamic creep evaluation of SBS modified HMA mixtures, Constr. Build. Mater., 25, 859, 10.1016/j.conbuildmat.2010.06.101 Ouyang, 2006, Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of antioxidants, Polym. Degrad. Stab., 91, 795, 10.1016/j.polymdegradstab.2005.06.009 Li, 2009, Improving the aging resistance of styrene-butadiene-styrene tri-block copolymer and application in polymer-modified asphalt, J. Appl. Polym. Sci., 116, 754 Lu, 1999, Phase separation of SBS polymer modified bitumens, J. Mater. Civ. Eng., 11, 51, 10.1061/(ASCE)0899-1561(1999)11:1(51) J. Oliver, K.Y. Khoo, Ensuring the quality of SBS modified binders, in: 2012: p. 17p. Al-Hadidy, 2009, Mechanistic analysis of ST and SBS-modified flexible pavements, Constr. Build. Mater., 23, 2941, 10.1016/j.conbuildmat.2009.02.023 Giavarini, 1996, Production of stable polypropylene-modified bitumens, Fuel, 75, 681, 10.1016/0016-2361(95)00312-6 Zhang, 2009, The resarch for asphalt modified with phosphorus trichloride/SBS, Int. Polym. Process., 24, 148, 10.3139/217.2216 Jianying, 2007, Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen, Polym. Eng. Sci., 47, 1289, 10.1002/pen.20802 Galooyak, 2010, Rheological properties and storage stability of bitumen/SBS/montmorillonite composites, Constr. Build. Mater., 24, 300, 10.1016/j.conbuildmat.2009.08.032 Jasso, 2012, Conventional asphalt modified by physical mixtures of linear SBS and montmorillonite, Appl. Clay Sci., 70, 37, 10.1016/j.clay.2012.09.004 Zhang, 2012, Effect of montmorillonite organic modification on ultraviolet aging properties of SBS modified bitumen, Constr. Build. Mater., 27, 553, 10.1016/j.conbuildmat.2011.07.008 Wen, 2004, Improved properties of SBS-modified asphalt with dynamic vulcanization, Polym. Eng. Sci., 42, 1070, 10.1002/pen.11013 Chen, 2007, Fundamental characterization of SBS-modified asphalt mixed with sulfur, J. Appl. Polym. Sci., 103, 2817, 10.1002/app.24621 Jin, 2002, Improved properties of polystyrene-modified asphalt through dynamic vulcanization, Polym. Test., 21, 633, 10.1016/S0142-9418(01)00135-0 Ouyang, 2005, Preparation and properties of styrene–butadiene–styrene copolymer/kaolinite clay compound and asphalt modified with the compound, Polym. Degrad. Stab., 87, 309, 10.1016/j.polymdegradstab.2004.08.014 Ahmedzade, 2007, Laboratory investigation of the properties of asphalt concrete mixtures modified with TOP–SBS, Constr. Build. Mater., 21, 626, 10.1016/j.conbuildmat.2005.12.003 Cordella, 2003, Functionalization of styrene–butadiene–styrene (SBS) triblock copolymer with glycidyl methacrylate (GMA), J. Appl. Polym. Sci., 87, 2074, 10.1002/app.11455 Wang, 2003, SBS/carbon black compounds give asphalts with improved high-temperature storage stability, Polym. Polym. Compos., 11, 477 Xiao-qing, 2009, Rheological property of bitumen modified by the mixture of the mechanochemically devulcanized tire rubber powder and SBS, J. Mater. Civ. Eng., 21, 699, 10.1061/(ASCE)0899-1561(2009)21:11(699) Rossi, 2013, Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts, J. Appl. Polym. Sci., 129, 3341, 10.1002/app.39057 Maurano, 2001, Functionalization of styrene-butadiene-styrene (SBS) triblock copolymer with maleic anhydride, Polym. Bull., 46, 491, 10.1007/s002890170037 Sun, 2006, Storage stability of SBS-modified road asphalt: preparation, morphology, and rheological properties, Pet. Sci. Technol., 24, 1067, 10.1081/LFT-200048186 Wen, 2001, Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur, J. Appl. Polym. Sci., 82, 989, 10.1002/app.1932 Sung-Hyo, 2018, Kinetics of sulfur vulcanization of NR, BR, SBR, and their blends using a rheometer and DSC, J. Appl. Polym. Sci., 61, 449 Zhang, 2011, Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts, Constr. Build. Mater., 25, 129, 10.1016/j.conbuildmat.2010.06.048 Xiang, 2011, Outdoor aging of road asphalt and SBS modified asphalt, Front. Chem. Sci. Eng., 5, 35, 10.1007/s11705-010-0551-4 Zhang, 2010, Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts, J. Hazard. Mater., 182, 507, 10.1016/j.jhazmat.2010.06.061 Wu, 2009, Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen, Constr. Build. Mater., 23, 1005, 10.1016/j.conbuildmat.2008.05.004 Ruan, 2003, The effect of long-term oxidation on the rheological properties of polymer modified asphalts, Fuel, 82, 1763, 10.1016/S0016-2361(03)00144-3 Gao, 2013, Thermal oxidative aging characterization of SBS modified asphalt, J. Wuhan Univ. Technol. Sci. Ed., 28, 88, 10.1007/s11595-013-0646-0 Lu, 1999, Chemical and rheological characteristics of styrene-butadiene-styrene polymer-modified bitumens, Transp. Res. Rec. J. Transp. Res. Board., 1661, 83, 10.3141/1661-13 Cortizo, 2004, Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts, Polym. Degrad. Stab., 86, 275, 10.1016/j.polymdegradstab.2004.05.006 Zhao, 2010, Analysis of aging mechanism of SBS polymer modified asphalt based on Fourier transform infrared spectrum, J. Wuhan Univ. Technol. Sci. Ed., 25, 1047, 10.1007/s11595-010-0147-3 Zhang, 2013, The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur, Constr. Build. Mater., 43, 461, 10.1016/j.conbuildmat.2013.03.001 Collins, 2006, Ordering and steric-hardening in SBS-modified bitumen, Energy Fuels, 20, 1266, 10.1021/ef050403q Shin, 1996, Microstructure, morphology, and failure modes of polymer-modified asphalts, Transp. Res. Rec. J. Transp. Res. Board., 1535, 61, 10.1177/0361198196153500109 Kim, 1829, Effect of styrene butadiene styrene modifier on cracking resistance of asphalt mixture, Transp. Res. Rec. J. Transp. Res. Board., 2003, 8 Allen, 2000, Degradation and stabilisation of styrene–ethylene–butadiene–styrene (SEBS) block copolymer, Polym. Degrad. Stab., 71, 113, 10.1016/S0141-3910(00)00162-2 Vargas, 2005, Asphalt modified by partially hydrogenated SBS tri-block copolymers, Rubber Chem. Technol., 78, 620, 10.5254/1.3547902 Peinado, 2006, Chemiluminescence from poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS) block copolymers, Polym. Degrad. Stab., 91, 862, 10.1016/j.polymdegradstab.2005.06.020 Polacco, 2006, Effect of composition on the properties of SEBS modified asphalts, Eur. Polym. J., 42, 1113, 10.1016/j.eurpolymj.2005.11.024 Becker, 2003, Use of rheological compatibility criteria to study SBS modified asphalts, J. Appl. Polym. Sci., 90, 1772, 10.1002/app.12764 Socal da Silva, 2004, Study of rheological properties of pure and polymer-modified Brazilian asphalt binders, J. Mater. Sci., 39, 539, 10.1023/B:JMSC.0000011509.84156.3b Elseifi, 2003, Quantitative effect of elastomeric modification on binder performance at intermediate and high temperatures, J. Mater. Civ. Eng., 15, 32, 10.1061/(ASCE)0899-1561(2003)15:1(32) Ouyang, 2006, Thermo-rheological properties and storage stability of SEBS/kaolinite clay compound modified asphalts, Eur. Polym. J., 42, 446, 10.1016/j.eurpolymj.2005.07.004 Bhurke, 1997, Fracture morphology and fracture thoughness measurement of polymer-modified asphalt concrete, Transp. Res. Rec., 23–33 Hawley, 1997, 251 Yousefi, 2002, Rubber-modified bitumens, Iran. Polym. J., 11, 303 Yousefi, 2009, Polymer-modifiedbitumen from the wastes of petrochemical plants, Iran. Polym. J., 18, 207 Zhang, 2009, Thermal behaviour and improved properties of SBR and SBR/Natural bitumen modified bitumens, Iran. Polym. J., 18, 465 Ling, 1997, Quantitative analysis of polymers and crumb rubber in hot-mix asphalts, Transp. Res. Rec. J. Transp. Res. Board., 1586, 57, 10.3141/1586-08 Newman, 1998, Dynamic shear rheological properties of polymer-modified asphalt binders, J. Elastomers Plast., 30, 245, 10.1177/009524439803000305 Zhang, 2009, The effect of styrene–butadiene–rubber/montmorillonite modification on the characteristics and properties of asphalt, Constr. Build. Mater., 23, 3112, 10.1016/j.conbuildmat.2009.06.011 Zhang, 2009, Investigation on thermo-rheological properties and stability of SBR modified asphalts containing palygorskite clay, J. Appl. Polym. Sci., 113, 2524, 10.1002/app.30223 Zhang, 2007, Improved properties of weathered coal and SBR/weathered coal compound modified asphalt, Iran. Polym. J., 16, 251 Zhang, 2009, Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black, Constr. Build. Mater., 23, 2678, 10.1016/j.conbuildmat.2008.12.020 Zhang, 2010, The research for high-performance SBR compound modified asphalt, Constr. Build. Mater., 24, 410, 10.1016/j.conbuildmat.2009.10.003 Liang, 2017, Improving thermo-rheological behavior and compatibility of SBR modified asphalt by addition of polyphosphoric acid (PPA), Constr. Build. Mater., 139, 183, 10.1016/j.conbuildmat.2017.02.065 Zhang, 2012, Influence of ageing on rheology of SBR/sulfur-modified asphalts, Polym. Eng. Sci., 52, 71, 10.1002/pen.22047 González, 2002, Rheological techniques as a tool to analyze polymer−bitumen interactions: bitumen modified with polyethylene and polyethylene-based Blends, Energy Fuels, 16, 1256, 10.1021/ef020049l García-Morales, 2004, The rheology of recycled EVA/LDPE modified bitumen, Rheol. Acta, 43, 482, 10.1007/s00397-004-0385-4 Tapkın, 2009, Repeated creep behavior of polypropylene fiber-reinforced bituminous mixtures, J. Transp. Eng., 135, 240, 10.1061/(ASCE)0733-947X(2009)135:4(240) Fawcett, 2002, An attempt at engineering the bulk properties of blends of a bitumen with polymers, Adv. Polym. Technol., 21, 275, 10.1002/adv.10032 Fawcett, 2000, Blends of bitumen with various polyolefins, Polymer (Guildf), 41, 5315, 10.1016/S0032-3861(99)00733-8 Miłkowski, 1985, Catalytic modification of road asphalt by polyethylene, J. Transp. Eng., 111, 54, 10.1061/(ASCE)0733-947X(1985)111:1(54) Kim, 2013, Comprehensive evaluation of polymer-modified SMA mixture produced with new polyethylene wax-based WMA additive with adhesion promoter Abdel-Goad, 2009, Waste plastic-modified bitumen: rheological study, J. Eng. Res., 6, 76, 10.24200/tjer.vol6iss1pp76-81 Jeong, 2011, Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film, Constr. Build. Mater., 25, 1890, 10.1016/j.conbuildmat.2010.11.068 Ouyang, 2012, Compatibilizer in waste tire powder and low-density polyethylene blends and the blends modified asphalt, J. Appl. Polym. Sci., 123, 485, 10.1002/app.34634 Baghaee Moghaddam, 2014, Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test, Mater. Des., 53, 317, 10.1016/j.matdes.2013.07.015 Polacco, 2005, Asphalt modification with different polyethylene-based polymers, Eur. Polym. J., 41, 2831, 10.1016/j.eurpolymj.2005.05.034 Fang, 2008, Combined modification of asphalt by waste PE and rubber, Polym. Compos., 29, 1183, 10.1002/pc.20424 Li, 2003, Melt grafting of maleic anhydride onto low-density polyethylene/polypropylene blends, Polym. Test., 22, 191, 10.1016/S0142-9418(02)00079-X Vargas, 2013, Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling, Constr. Build. Mater., 45, 243, 10.1016/j.conbuildmat.2013.03.064 Morrison, 1994, Chlorinated polyolefins for asphalt binder modification, J. Appl. Polym. Sci., 54, 231, 10.1002/app.1994.070540209 Daly, 1995 Yousefi, 2003, Polyethylene dispersions in bitumen: the effects of the polymer structural parameters, J. Appl. Polym. Sci., 90, 3183, 10.1002/app.12942 Hussein, 2005, Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt, Rheol. Acta, 45, 92, 10.1007/s00397-005-0455-2 Jew, 1986, Polyethlene-modified bitumen for paving applications, J. Appl. Polym. Sci., 31, 2685, 10.1002/app.1986.070310824 Qi, 1995, Evaluation of polymer-modified asphalt concrete mixtures, J. Mater. Civ. Eng., 7, 117, 10.1061/(ASCE)0899-1561(1995)7:2(117) Murphy, 2001, Recycled polymers for use as bitumen modifiers, J. Mater. Civ. Eng., 13, 306, 10.1061/(ASCE)0899-1561(2001)13:4(306) Punith, 2007, Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive, J. Mater. Civ. Eng., 19, 500, 10.1061/(ASCE)0899-1561(2007)19:6(500) Aschuri, 2010, Modification of a 14mm asphalt concrete surfacing using RAP and waste HDPE plastic, Int. J. Pavements, 9, 70 Yuanyuan, 2011, Application and performance of polyethylene modifying additive in asphalt mixture, 1915 Punith, 2011, Evaluation of reclaimed polyethylene modified asphalt concrete mixtures, Int. J. Pavement Res. Technol., 4, 1 Punith, 2011, Laboratory investigation of open-graded friction-course mixtures containing polymers and cellulose fibers, J. Transp. Eng., 138, 67, 10.1061/(ASCE)TE.1943-5436.0000304 Ahmadinia, 2012, Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt, Constr. Build. Mater., 36, 984, 10.1016/j.conbuildmat.2012.06.015 Baghaee Moghaddam, 2012, Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles, Constr. Build. Mater., 34, 236, 10.1016/j.conbuildmat.2012.02.054 Fuentes-Audén, 2008, Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen, Polym. Test., 27, 1005, 10.1016/j.polymertesting.2008.09.006 Punith, 2010, Behavior of reclaimed polyethylene modified asphalt cement for paving purposes, J. Mater. Civ. Eng., 23, 833, 10.1061/(ASCE)MT.1943-5533.0000235 Fang, 2013, Preparation, characterization and hot storage stability of asphalt modified by waste polyethylene packaging, J. Mater. Sci. Technol., 29, 434, 10.1016/j.jmst.2013.02.016 Fang, 2012, Combined modification of asphalt with polyethylene packaging waste and organophilic montmorillonite, Polym. Test., 31, 276, 10.1016/j.polymertesting.2011.11.008 Yousefi, 2000, Composite asphalt binders: effect of modified RPE on asphalt, J. Mater. Civ. Eng., 12, 113, 10.1061/(ASCE)0899-1561(2000)12:2(113) Fang, 2009, UV-aging resistance of packaging waste PE modified asphalts, Polym. Plast. Technol. Eng., 48, 945, 10.1080/03602550902995059 Ho, 2006, Study of recycled polyethylene materials as asphalt modifiers, Can. J. Civ. Eng., 33, 968, 10.1139/l06-044 Fawcett, 1999, Blends of bitumen with polyethylenes, Polymer (Guildf), 40, 6337, 10.1016/S0032-3861(98)00779-4 Yousefi, 2000, Effect of used-tire-derived pyrolytic oil residue on the properties of polymer-modified asphalts, Fuel, 79, 975, 10.1016/S0016-2361(99)00216-1 Panda, 2002, Utilization of reclaimed polyethylene in bituminous paving mixes, J. Mater. Civ. Eng., 14, 527, 10.1061/(ASCE)0899-1561(2002)14:6(527) Yousefi, 2004, Rubber-polyethylene modified bitumens, Iran. Polym. J., 13, 101 González, 2006, Bitumen/polyethylene blends: using m-LLDPEs to improve stability and viscoelastic properties, Rheol. Acta, 45, 603, 10.1007/s00397-005-0009-7 Kumar, 2006, Strength characteristics of polymer modified mixes, Int. J. Pavement Eng., 7, 63, 10.1080/10298430500495147 Pérez-Lepe, 2006, Destabilization mechanism of polyethylene-modified bitumen, J. Appl. Polym. Sci., 100, 260, 10.1002/app.23091 Yeh, 2010, Evaluation of thermal and viscoelastic properties of asphalt binders by compounding with polymer modifiers, Polym. Compos., 31, 1738, 10.1002/pc.20964 Awwad, 2007, The use of polyethylene in hot asphalt mixtures, Am. J. Appl. Sci., 4, 390, 10.3844/ajassp.2007.390.396 Al-Hadidy, 2009, Effect of polyethylene on life of flexible pavements, Constr. Build. Mater., 23, 1456, 10.1016/j.conbuildmat.2008.07.004 Al-Hadidy, 2009, Evaluation of pyrolisis LDPE modified asphalt paving materials, J. Mater. Civ. Eng., 21, 618, 10.1061/(ASCE)0899-1561(2009)21:10(618) Panda, 1999, Engineering properties of EVA-modified bitumen binder for paving mixes, J. Mater. Civ. Eng., 11, 131, 10.1061/(ASCE)0899-1561(1999)11:2(131) Henderson, 1993, Ethylene-vinyl acetate (EVA) copolymers: a general review, Electr. Insul. Mag. IEEE, 9, 30, 10.1109/57.249923 Kumar, 2010, Comparative study of rheological behavior of modified binders for high-temperature areas, J. Mater. Civ. Eng., 22, 978, 10.1061/(ASCE)MT.1943-5533.0000099 Valkering, 1990, Thermoplastic rubbers for the modification of bitumens: improved elastic recovery for high deformation resistance of asphalt mixes, 1 Behbahani, 2009, Comparison of performance of asphalt mixtures containing polymer modifiers, J. Test. Eval., 37, 431 Ralph, 2011, Rheological properties of the polymer modified bitumen with emphasis on SBS polymer and its microstructure, 41 Gorkem, 2009, Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime, Constr. Build. Mater., 23, 2227, 10.1016/j.conbuildmat.2008.12.001 Zanzotto, 2000, Thermomechanical properties of several polymer modified asphalts, Appl. Rheol., 10, 185, 10.1515/arh-2000-0012 Luo, 2011, Preparation and properties of bitumen modified by EVA graft copolymer, Constr. Build. Mater., 25, 1830, 10.1016/j.conbuildmat.2010.11.079 Isacsson, 1999, Characterization of bitumens modified with SEBS, EVA and EBA polymers, J. Mater. Sci., 34, 3737, 10.1023/A:1004636329521 Y. Jiang, R.S. McDaniel, Application of Cracking and Seating and Use of Fibers to Control Reflective Cracking, 1993. Tapkın, 2008, The effect of polypropylene fibers on asphalt performance, Build. Environ., 43, 1065, 10.1016/j.buildenv.2007.02.011 Huang, 1996, Dynamic properties of fiber-modified overlay mixture, Transp. Res. Rec. J. Transp. Res. Board., 1545, 98, 10.1177/0361198196154500113 Kim, 1999, Mode I reflection cracking resistance of strengthened asphalt concretes, Constr. Build. Mater., 13, 243, 10.1016/S0950-0618(99)00032-X Tapkın, 2009, Accumulated strain prediction of polypropylene modified marshall specimens in repeated creep test using artificial neural networks, Expert Syst. Appl., 36, 11186, 10.1016/j.eswa.2009.02.089 Othman, 2010, Impact of polypropylene application method on long-term aging of polypropylene-modified HMA, J. Mater. Civ. Eng., 22, 1012, 10.1061/(ASCE)MT.1943-5533.0000105 Ghaly, 2008, Combined effect of polypropylene and styrene-butadiene styrene on asphalt and asphalt mixture performance, J. Appl. Sci. Res., 4, 1297 Dessouky, 2013, Influence of hindered phenol additives on the rheology of aged polymer-modified bitumen, Constr. Build. Mater., 38, 214, 10.1016/j.conbuildmat.2012.07.089 Golestani, 2012, Performance evaluation of linear and nonlinear nanocomposite modified asphalts, Constr. Build. Mater., 35, 197, 10.1016/j.conbuildmat.2012.03.010 Jasso, 2013, Preparation and properties of conventional asphalt modified by physical mixtures of linear SBS and montmorillonite clay, Constr. Build. Mater., 38, 759, 10.1016/j.conbuildmat.2012.09.043 Zhang, 2011, Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen, Mater. Chem. Phys., 129, 769, 10.1016/j.matchemphys.2011.04.078 Pei-Hung, 2005, Thermal and rheological properties of maleated polypropylene modified asphalt, Polym. Eng. Sci., 45, 1152, 10.1002/pen.20386 Fu, 2007, Storage stability and compatibility of asphalt binder modified by SBS graft copolymer, Constr. Build. Mater., 21, 1528, 10.1016/j.conbuildmat.2006.03.008 Hesp, 2002, Low-temperature fracture in reactive-ethylene-terpolymer-modified asphalt binders, Int. J. Pavement Eng., 3, 153, 10.1080/1029843021000067809 Navarro, 2007, Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer, Fuel., 86, 2291, 10.1016/j.fuel.2007.01.023 Martín-Alfonso, 2008, Use of a MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing applications, Eur. Polym. J., 44, 1451, 10.1016/j.eurpolymj.2008.02.026 Navarro, 2009, Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: a comparative analysis, J. Ind. Eng. Chem., 15, 458, 10.1016/j.jiec.2009.01.003 Martín-Alfonso, 2009, Effect of processing temperature on the bitumen/MDI-PEG reactivity, Fuel Process. Technol., 90, 525, 10.1016/j.fuproc.2009.01.007 Carrera, 2009, Influence of bitumen colloidal nature on the design of isocyanate-based bituminous products with enhanced rheological properties, Ind. Eng. Chem. Res., 48, 8464, 10.1021/ie9004404 Carrera, 2010, Novel bitumen/isocyanate-based reactive polymer formulations for the paving industry, Rheol. Acta, 49, 563, 10.1007/s00397-009-0399-z Shi, 2018, Effects of nano-silica and rock asphalt on rheological properties of modified bitumen, Constr. Build. Mater., 161, 705, 10.1016/j.conbuildmat.2017.11.162 Bala, 2018, Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance, Case Stud. Constr. Mater., 8, 447 Saltan, 2017, Examination of hot mix asphalt and binder performance modified with nano silica, Constr. Build. Mater., 156, 976, 10.1016/j.conbuildmat.2017.09.069 Yusoff, 2014, The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures, Constr. Build. Mater., 72, 139, 10.1016/j.conbuildmat.2014.09.014 Shafabakhsh, 2015, Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates, Constr. Build. Mater., 98, 692, 10.1016/j.conbuildmat.2015.08.083 Siddig, 2018, Effects of ethylene vinyl acetate and nanoclay additions on high-temperature performance of asphalt binders, Constr. Build. Mater., 169, 276, 10.1016/j.conbuildmat.2018.03.012 Zare-Shahabadi, 2010, Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticles, Constr. Build. Mater., 24, 1239, 10.1016/j.conbuildmat.2009.12.013 Fang, 2016, Preparation and properties of isocyanate and nano particles composite modified asphalt, Constr. Build. Mater., 119, 113, 10.1016/j.conbuildmat.2016.04.099 Chen, 2018, Laboratory investigation of using acrylated epoxidized soybean oil (AESO) for asphalt modification, Constr. Build. Mater., 187, 267, 10.1016/j.conbuildmat.2018.07.204 Podolsky, 2017, Effect of bio-derived/chemical additives on warm mix asphalt compaction and mix performance at low temperature, Cold Reg. Sci. Technol., 136, 52, 10.1016/j.coldregions.2017.02.003 Yang, 2014, Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources, Constr. Build. Mater., 51, 424, 10.1016/j.conbuildmat.2013.11.017 Nabizadeh, 2017, Effects of rejuvenators on high-RAP mixtures based on laboratory tests of asphalt concrete (AC) mixtures and fine aggregate matrix (FAM) mixtures, Constr. Build. Mater., 152, 65, 10.1016/j.conbuildmat.2017.06.101 Król, 2016, Effect of bitumen fluxing using a bio-origin additive, Constr. Build. Mater., 114, 194, 10.1016/j.conbuildmat.2016.03.086 Sun, 2016, Properties of asphalt binder modified by bio-oil derived from waste cooking oil, Constr. Build. Mater., 102, 496, 10.1016/j.conbuildmat.2015.10.173 Lei, 2015, Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders, Constr. Build. Mater., 86, 95, 10.1016/j.conbuildmat.2015.03.106 Ezzat, 2016, Evaluation of asphalt binders modified with nanoclay and nanosilica, Procedia Eng., 143, 1260, 10.1016/j.proeng.2016.06.119 Liu, 2018, Evaluation of cracking properties of SBS-modified binders containing organic montmorillonite, Constr. Build. Mater., 175, 196, 10.1016/j.conbuildmat.2018.04.185 Omar, 2018, Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods, Constr. Build. Mater., 167, 391, 10.1016/j.conbuildmat.2018.02.011 de Melo, 2017, Evaluation of properties and fatigue life estimation of asphalt mixture modified by organophilic nanoclay, Constr. Build. Mater., 140, 364, 10.1016/j.conbuildmat.2017.02.143 Fallahi Abandansari, 2017, Investigating effects of using nanomaterial on moisture susceptibility of hot-mix asphalt using mechanical and thermodynamic methods, Constr. Build. Mater., 131, 667, 10.1016/j.conbuildmat.2016.11.052 Ahmedzade, 2013, The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen, Constr. Build. Mater., 38, 285, 10.1016/j.conbuildmat.2012.07.090 Crossley, 2000, New class of reactive polymer modifiers for asphalt: mitigation of moisture damage, Transp. Res. Rec. J. Transp. Res. Board., 1728, 52, 10.3141/1728-08 Selvavathi, 2002, Modifications of bitumen by elastomer and reactive polymer-A comparative study, Pet. Sci. Technol., 20, 535, 10.1081/LFT-120003577 Pazzagli, 2000, Reactive compatibilization of polyolefin/PET blends by melt grafting with glycidyl methacrylate, Macromol. Symp., 149, 225, 10.1002/1521-3900(200001)149:1<225::AID-MASY225>3.0.CO;2-8 Loyens, 2002, Ultimate mechanical properties of rubber toughened semicrystalline PET at room temperature, Polymer (Guildf), 43, 5679, 10.1016/S0032-3861(02)00472-X Minkova, 2002, Characterization of blends of LDPE and PA6 with functionalized polyethylenes, Polymer (Guildf), 43, 6195, 10.1016/S0032-3861(02)00532-3 Chiono, 2003, Reactive compatibilizer precursors for LDPE/PA6 blends. III: ethylene–glycidylmethacrylate copolymer, Polymer (Guildf), 44, 2423, 10.1016/S0032-3861(03)00134-4 Saltan, 2018, Performance analysis of nano modified bitumen and hot mix asphalt, Constr. Build. Mater., 173, 228, 10.1016/j.conbuildmat.2018.04.014 Vargas, 2017, Effects of montmorillonite (Mt) and two different organo-Mt additives on the performance of asphalt, Appl. Clay Sci., 139, 20, 10.1016/j.clay.2017.01.009 Zhang, 2018, Effects of ZnO particle size on properties of asphalt and asphalt mixture, Constr. Build. Mater., 159, 578, 10.1016/j.conbuildmat.2017.11.016 Fang, 2013, Nanomaterials applied in asphalt modification: a review, J. Mater. Sci. Technol., 29, 589, 10.1016/j.jmst.2013.04.008 Nazari, 2018, Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles, Constr. Build. Mater., 170, 591, 10.1016/j.conbuildmat.2018.03.107 Jamshidi, 2015, Characterization of the rate of change of rheological properties of nano-modified asphalt, Constr. Build. Mater., 98, 437, 10.1016/j.conbuildmat.2015.08.069 Zhang, 2016, High and low temperature properties of nano-particles/polymer modified asphalt, Constr. Build. Mater., 114, 323, 10.1016/j.conbuildmat.2016.03.118 Li, 2017, Developments of nano materials and technologies on asphalt materials – a review, Constr. Build. Mater., 143, 633, 10.1016/j.conbuildmat.2017.03.158 de Melo, 2018, Experimental evaluation of the influence of reinforcement with Multi-Walled Carbon Nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt, Constr. Build. Mater., 162, 369, 10.1016/j.conbuildmat.2017.12.033 Yu, 2007, Preparation and properties of montmorillonite modified asphalts, Mater. Sci. Eng. A, 447, 233, 10.1016/j.msea.2006.10.037 Khattak, 2012, The impact of carbon nano-fiber modification on asphalt binder rheology, Constr. Build. Mater., 30, 257, 10.1016/j.conbuildmat.2011.12.022 Jin, 2018, Structure characteristics of organic bentonite and the effects on rheological and aging properties of asphalt, Powder Technol., 329, 107, 10.1016/j.powtec.2018.01.047 El-Shafie, 2012, The addition effects of macro and nano clay on the performance of asphalt binder, Egypt. J. Pet., 21, 149, 10.1016/j.ejpe.2012.11.008 Yu, 2009, Effect of organo-montmorillonite on aging properties of asphalt, Constr. Build. Mater., 23, 2636, 10.1016/j.conbuildmat.2009.01.007 Jianying, 2010, Effect of various organomodified montmorillonites on the properties of montmorillonite/bitumen nanocomposites, J. Mater. Civ. Eng., 22, 788, 10.1061/(ASCE)MT.1943-5533.0000012 Sinha Ray, 2003, Polymer/layered silicate nanocomposites: a review from preparation to processing, Prog. Polym. Sci., 28, 1539, 10.1016/j.progpolymsci.2003.08.002 You, 2011, Nanoclay-modified asphalt materials: preparation and characterization, Constr. Build. Mater., 25, 1072, 10.1016/j.conbuildmat.2010.06.070 Nazzal, 2013, Fundamental characterization of asphalt clay nanocomposites, J. Nanomech. Micromech., 3, 1, 10.1061/(ASCE)NM.2153-5477.0000050 Sinha Ray, 2005, Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world, Prog. Mater. Sci., 50, 962, 10.1016/j.pmatsci.2005.05.002 Kosma, 2018, Bitumen nanocomposites with improved performance, Constr. Build. Mater., 160, 30, 10.1016/j.conbuildmat.2017.11.024 Golestani, 2015, Nanoclay application to asphalt concrete: characterization of polymer and linear nanocomposite-modified asphalt binder and mixture, Constr. Build. Mater., 91, 32, 10.1016/j.conbuildmat.2015.05.019 Behnood, 2018, Soil and clay stabilization with calcium- and non-calcium-based additives: a state-of-the-art review of challenges, approaches and techniques, Transp. Geotech., 17, 14, 10.1016/j.trgeo.2018.08.002 Sharma, 2006, Addition polymers from natural oils—a review, Prog. Polym. Sci., 31, 983, 10.1016/j.progpolymsci.2006.09.003 Su, 2018, Productions and applications of bio-asphalts – a review, Constr. Build. Mater., 183, 578, 10.1016/j.conbuildmat.2018.06.118 Metwally, 2010 Lei, 2018, Shear property, high-temperature rheological performance and low-temperature flexibility of asphalt mastics modified with bio-oil, Constr. Build. Mater., 174, 30, 10.1016/j.conbuildmat.2018.04.094 Fini, 2011, Chemical characterization of biobinder from swine manure: sustainable modifier for asphalt binder, J. Mater. Civ. Eng., 23, 1506, 10.1061/(ASCE)MT.1943-5533.0000237 Fini, 2016, Fractional viscoelastic study of low-temperature characteristics of biomodified asphalt binders, J. Mater. Civ. Eng., 28, 4016078, 10.1061/(ASCE)MT.1943-5533.0001525 Seidel, 2014, Rheological characterization of asphalt binders modified with soybean fatty acids, Constr. Build. Mater., 53, 324, 10.1016/j.conbuildmat.2013.11.087 Podolsky, 2018, Effect of corn and soybean oil derived additives on polymer-modified HMA and WMA master curve construction and dynamic modulus performance, Int. J. Pavement Res. Technol., 11, 541, 10.1016/j.ijprt.2018.01.002 Sun, 2017, Formulation and aging resistance of modified bio-asphalt containing high percentage of waste cooking oil residues, J. Clean. Prod., 161, 1203, 10.1016/j.jclepro.2017.06.155 Elkashef, 2017, Preliminary examination of soybean oil derived material as a potential rejuvenator through Superpave criteria and asphalt bitumen rheology, Constr. Build. Mater., 149, 826, 10.1016/j.conbuildmat.2017.05.195 Portugal, 2017, Rheological properties of asphalt binders prepared with maize oil, Constr. Build. Mater., 152, 1015, 10.1016/j.conbuildmat.2017.07.077 Cao, 2018, Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil, Constr. Build. Mater., 180, 455, 10.1016/j.conbuildmat.2018.06.001 Elkashef, 2017, Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator, Constr. Build. Mater., 151, 345, 10.1016/j.conbuildmat.2017.06.099 Elkashef, 2018, Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures, Int. J. Fatigue, 108, 90, 10.1016/j.ijfatigue.2017.11.013 Wang, 2018, Laboratory investigation on chemical and rheological properties of bio-asphalt binders incorporating waste cooking oil, Constr. Build. Mater., 167, 348, 10.1016/j.conbuildmat.2018.02.038 Lei, 2018, Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt, Constr. Build. Mater., 191, 692, 10.1016/j.conbuildmat.2018.10.064 Zhang, 2017, High temperature performance of SBS modified bio-asphalt, Constr. Build. Mater., 144, 99, 10.1016/j.conbuildmat.2017.03.103 Gao, 2018, Research on properties of bio-asphalt binders based on time and frequency sweep test, Constr. Build. Mater., 160, 786, 10.1016/j.conbuildmat.2018.01.048 Luo, 2017, Investigation on physical and high temperature rheology properties of asphalt binder adding waste oil and polymers, Constr. Build. Mater., 144, 13, 10.1016/j.conbuildmat.2017.03.105 Zhang, 2018, Using bio-based rejuvenator derived from waste wood to recycle old asphalt, Constr. Build. Mater., 189, 568, 10.1016/j.conbuildmat.2018.08.201 Zargar, 2012, Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen, J. Hazard. Mater., 233–234, 254, 10.1016/j.jhazmat.2012.06.021 Gong, 2016, Physical–chemical properties of aged asphalt rejuvenated by bio-oil derived from biodiesel residue, Constr. Build. Mater., 105, 35, 10.1016/j.conbuildmat.2015.12.025 Zaumanis, 2014, Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures, Constr. Build. Mater., 71, 538, 10.1016/j.conbuildmat.2014.08.073 Oldham, 2015, Application of a bio-binder as a rejuvenator for wet processed asphalt shingles in pavement construction, Constr. Build. Mater., 86, 75, 10.1016/j.conbuildmat.2015.03.085