A novel ternary mixed matrix membrane containing glycerol-modified poly(ether-block-amide) (Pebax 1657)/copper nanoparticles for CO2 separation

Sanaeepur, 2012, A novel acrylonitrile-butadiene-styrene/poly(ethylene glycol) membrane: preparation, characterization, and gas permeation study, Polym. Adv. Technol., 23, 1207, 10.1002/pat.2031 Jazebizadeh, 2017, Investigation of methane and carbon dioxide gases permeability through PEBAX/PEG/ZnO nanoparticle mixed matrix membrane, Silicon, 9, 775, 10.1007/s12633-016-9435-7 Sanaeepur, 2011, Preparation and characterization of acrylonitrile-butadiene-styrene/poly(vinyl acetate) membrane for CO2 removel, Sep. Purif. Technol., 80, 499, 10.1016/j.seppur.2011.06.003 Kargari, 2015, Application of membrane gas separation processes in petroleum industry, 592 Hassani, 2014, Polyethersulfone/Poly(D,L-lactide) blend membranes: preparation, characterization, and performance, Chem. Eng. Technol., 37, 1065, 10.1002/ceat.201300477 Chen, 2015, New Pebax/zeolite Y composite membranes for CO2 capture from flue gas, J. Membr. Sci., 495, 415, 10.1016/j.memsci.2015.08.045 Ghasemi Estahbanati, 2017, Preparation and characterization of novel Ionic liquid/Pebax membranes for efficient CO2/light gases separation, J. Ind. Eng. Chem., 51, 77, 10.1016/j.jiec.2017.02.017 Ebadi Amooghin, 2016, New advances in polymeric membranes for CO2 separation, 354 Rowe, 2010, Influence of temperature on the upper bound: theoretical considerations and comparison with experimental results, J. Membr. Sci., 360, 58, 10.1016/j.memsci.2010.04.047 Zamani Pedram, 2014, Synthesis and characterization of diethanolamine-impregnated cross-linked polyvinylalcohol/glutaraldehyde membranes for CO2/CH4 separation, J. Ind. Eng. Chem., 20, 74, 10.1016/j.jiec.2013.04.024 Ebadi Amooghin, 2013, Mathematical modeling of mass transfer in multicomponent gas mixture across the synthesized composite polymeric membrane, J. Ind. Eng. Chem., 19, 870, 10.1016/j.jiec.2012.11.003 Rezakazemi, 2014, State-of-the-art membrane based CO2 separation using mixed matrix membranes (MMMs): an overview on current status and future directions, Prog. Polym. Sci., 39, 817, 10.1016/j.progpolymsci.2014.01.003 Sanaeepur, 2018 Ebadi Amooghin, 2015, The effects of aminosilane grafting on NaY zeolite-Matrimid®5218 mixed matrix membranes for CO2/CH4 separation, J. Membr. Sci., 490, 364, 10.1016/j.memsci.2015.04.070 Rabiee, 2015, Gas permeation and sorption properties of poly(amide-12-b-ethyleneoxide)(Pebax 1074)/ SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation, J. Ind. Eng. Chem., 27, 223, 10.1016/j.jiec.2014.12.039 Hosseinkhani, 2014, Facilitated transport of CO2 through Co(II)-S-EPDM ionomer membrane, J. Membr. Sci., 469, 151, 10.1016/j.memsci.2014.06.021 Shen, 2016, Uio-66-polyether block amide mixed matrix membranes for CO2 separation, J. Membr. Sci., 513, 155, 10.1016/j.memsci.2016.04.045 Kim, 2001, Gas permeation properties of poly(amide-6-b-ethylene oxide)-silica hybrid membranes, J. Membr. Sci., 193, 209, 10.1016/S0376-7388(01)00514-2 Zhao, 2017, High CO2 separation performance of Pebax/CNTs/GTA mixed matrix membranes, J. Membr. Sci., 521, 104, 10.1016/j.memsci.2016.08.061 Khalilinejad, 2017, Preparation and characterization of (Pebax 1657+silica nanoparticle)/PVC mixed matrix composite membrane for CO2/N2 separation, Chem. Pap., 71, 803, 10.1007/s11696-016-0084-5 Khalilinejad, 2015, Preparation of poly(ether-6-block amide)/PVC thin film composite membrane for CO2 separation: effect of top layer thickness and operating parameters, J.Membr. Sci. Res., 1, 124 Bondar, 1999, Gas sorption and characterization of poly(ether-b-amide) segmented block copolymers, J. Polym. Sci. B Polym. Phys., 37, 2463, 10.1002/(SICI)1099-0488(19990901)37:17<2463::AID-POLB18>3.0.CO;2-H Car, 2008, PEG modified poly(amide-b-ethylene oxide) membranes for CO2 separation, J. Membr. Sci., 307, 88, 10.1016/j.memsci.2007.09.023 Azizi, 2017, Effects of low and high molecular mass PEG incorporation into different types of poly(ether-b-amide) copolymers on the permeation properties of CO2 and CH4, J. Polym. Res., 24, 1, 10.1007/s10965-017-1297-1 Car, 2008, Pebax/polyethylene glycol blend thin film composite membranes for CO2 separation: performance with mixed gases, Sep. Purif. Technol., 62, 110, 10.1016/j.seppur.2008.01.001 Jomekian, 2017, Ionic liquid-modified Pebax® 1657 membrane filled by ZIF-8 particles for separation of CO2 from CH4,N2 and H2, J. Membr. Sci., 524, 652, 10.1016/j.memsci.2016.11.065 Jindaratsamee, 2011, Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes, J. Chem. Thermodyn., 43, 311, 10.1016/j.jct.2010.09.015 Rabiee, 2015, Gas transport properties of reverse-selective poly(ether-b-amide6)/[Emim][BF4] gel membranes for CO2/light gases separation, J. Membr. Sci., 476, 286, 10.1016/j.memsci.2014.11.037 Mahmoudi, 2015, CO2/CH4 separation through a novel commercializable three-phase PEBA/PEG/NaX nanocomposite membrane, Chem. Eng. Technol., 23, 238 Anthony, 2005, Anion effects on gas solubility in ionic liquids, J. Phys. Chem. B, 109, 6366, 10.1021/jp046404l Li, 2015, Anionic surfactant-doped Pebax membrane with optimal free volume characteristics for efficient CO2 separation, J. Membr. Sci., 493, 460, 10.1016/j.memsci.2015.06.046 Mahdavi, 2017, Performance evaluation of a synthesized and characterized Pebax 1657/PEG1000/γ-Al2O3 membrane for CO2/CH4 separation using response surface methodology, J. Polym. Res., 24, 1, 10.1007/s10965-017-1228-1 Ghasemi Estahbanati, 2017, Interfacial design of ternary mixed matrix membranes containing Pebax 1657/silver nanopowder /[BMIM][BF4] for improved CO2 separarion performance, ACS Appl. Mater. Interfaces, 9, 10094, 10.1021/acsami.6b16539 Mirzaei, 2015, A review of different solvents, mass transfer, and hydrodynamics for postcombustion CO2 capture, Rev. Chem. Eng., 31, 521, 10.1515/revce-2014-0045 Meshkat, 2018, Mixed matrix membranes based on amine and non-amine MIL-53(Al) in Pebax® MH-1657 for CO2 separation, Sep. Purif. Technol., 200, 177, 10.1016/j.seppur.2018.02.038 Rokicki, 2005, Hyperbranched aliphatic Polyethers obtained from environmentally benign monomer: glycerol carbonate, Green Chem., 7, 529, 10.1039/b501597a Reijerkerk, 2010, Polyether based block copolymer membranes for CO2 separation Sanaeepur, 2016, A novel Co2+ exchanged zeolite Y/cellulose acetate mixed matrix membrane for CO2/N2 separation, J. Taiwan Inst. Chem. Eng., 60, 403, 10.1016/j.jtice.2015.10.042 Sanaeepur, 2014, Aminosilane-functionalization of a nanoporous Y-type zeolite for application in a cellulose acetate based mixed matrix membrane for CO2 separation, RSC Adv., 4, 63966, 10.1039/C4RA08783F Azizi, 2017, Synthesis of a new nanocomposite membrane (PEBAX-1074/PEG-400/TiO2) in order to separate CO2 from CH4, J. Nat. Gas Sci. Eng., 37, 39, 10.1016/j.jngse.2016.11.038 Hosseinzadeh Beiragh, 2016, Synthesis and characterization of poly (ether-block-amide) mixed matrix membranes incorporated by nanoporous ZSM-5 particles for CO2/CH4 separation, Asia-Pac. J. Chem. Eng., 11, 522, 10.1002/apj.1973 Kongjao, 2010, Purification of crude glycerol derived from waste used-oil methyl ester plant, Korean J. Chem. Eng., 27, 944, 10.1007/s11814-010-0148-0 Gomez Siurana, 2013, TGA/FTIR study of tobacco and glycerol-tobacco mixtures, Thermochim. Acta, 573, 146, 10.1016/j.tca.2013.09.007 Ghadimi, 2014, Preparation of alloyed poly(ether block amide)/poly(ethylene glycol diacrylate) membranes for separation of CO2/H2 (syngas application), J. Membr. Sci., 458, 14, 10.1016/j.memsci.2014.01.048 Feng, 2013, Poly (amide-12-b-ethylene oxide)/glycerol triacetate blend membranes for CO2 separation, Int. J. Greenh. Gas. Control, 19, 41, 10.1016/j.ijggc.2013.08.012 Rabiee, 2014, Improvement in CO2/H2 separation by fabrication of poly(ether-b-amide6)/glycerol triacetate gel membranes, J. Membr. Sci., 469, 43, 10.1016/j.memsci.2014.06.026 Arabi Shamsabadi, 2017, Efficient CO2-removal using novel mixed-matrix membranes with modified TiO2 nanoparticles, J. Mater. Chem. A, 5, 4011, 10.1039/C6TA09990D Ghadimi, 2015, Gas permeation, sorption and diffusion through PEBA/SiO2 nanocomposite membranes (chemical surface modification of nanoparticles), Int. J. Hydrog. Energy, 40, 9723, 10.1016/j.ijhydene.2015.06.013 Rahman, 2013, PEBAX with PEG functionalized POSS as nanocomposite membranes for CO2 separation, J. Membr. Sci., 437, 286, 10.1016/j.memsci.2013.03.001 Sanaeepur, 2019, Pebax-modified cellulose acetate membrane for CO2/N2 separation, J. Membr. Sci. Res Buera, 1999, DSC confirmation that vitrification is not necessary for stabilization of the restriction enzyme EcoRI dried with saccharides, Biotechnol. Prog., 15, 577, 10.1021/bp990032u Farnam, 2016, An investigation of blended polymeric membranes and their gas separation performance, RSC Adv., 6, 102671, 10.1039/C6RA21574B Pan, 2007, Diffusion behavior of benzene/cyclohexane molecules in poly(vinyl alcohol)-graphite hybrid membranes by molecular dynamics simulation, Chem. Eng. Sci., 62, 703, 10.1016/j.ces.2006.07.046 Isanejad, 2016, Pebax membrane for CO2/CH4 separation: effects of various solvents on morphology and performance, J. Appl. Polym. Sci., 134, 1 van Krevelen, 2009 Hansen, 2007 Dorosti, 2018, Fabrication and investigation of PEBAX/Fe-BTC, a high permeable and CO2 selective mixed matrix membrane, Chem. Eng. Res. Des., 136, 119, 10.1016/j.cherd.2018.01.029 Dehghani, 2017, Molecular dynamics and Monta Carlo simulation of the structural properties, diffusion and adsorption of poly (amide-6-b-ethylene oxide)/ Faujasite mixed matrix membranes, J. Mol. Liq., 242, 404, 10.1016/j.molliq.2017.07.034 Ebadi Amooghin, 2018, Substantial breakthroughs on function-led design of advanced materials used in mixed matrix membranes (MMMs): a new horizon for efficient CO2 separation, Prog. Mater. Sci. Ebadi Amooghin, 2018, "Ship-in-a-bottle”, a new synthesis strategy for preparing novel hybrid host-guest nanocomposites for highly selective membrane gas separation, J. Mater. Chem. A, 6, 1751, 10.1039/C7TA08081F Lee, 2012, Facilitated CO2 transport membranes utilizing positively polarized copper nanoparticles, Chem. Commun., 48, 5298, 10.1039/c2cc17535e Kim, 2009, Facile synthesis of copper nanoparticles by ionic liquids and its application to facilitated olefin transport membranes, Ind. Eng. Chem. Res., 48, 7437, 10.1021/ie900150c Han, 2011, Effect of ionic liquids on dissociation of copper flake into copper nanoparticles and its application to facilitated olefin transport membranes, J. Membr. Sci., 347, 43, 10.1016/j.memsci.2011.03.005 Nasir, 2013, Material advancements in fabrication of mixed-matrix membranes, Chem. Eng. Technol., 36, 717, 10.1002/ceat.201200734 Moore, 2005, Non-ideal effects in organic-inorganic materials for gas separation membranes, J. Mol. Struct., 739, 87, 10.1016/j.molstruc.2004.05.043 Xia, 2006, Preparation, structure and thermal stability of Cu/LDPE nanocomposites, Mater. Chem. Phys., 95, 122, 10.1016/j.matchemphys.2005.05.010 Freund, 1996, Surface chemistry of carbon dioxide, Surf. Sci. Rep., 25, 225, 10.1016/S0167-5729(96)00007-6 Isahak, 2013, Adsorption–desorption of CO2 on different type of copper oxides surfaces: physical and chemical attractions studies, J. CO2 Util., 2, 8, 10.1016/j.jcou.2013.06.002 Yin, 2016, Oxy-fuel combustion of pulverized fuels: combustion fundamentals and modeling, Appl. Energy, 162, 742, 10.1016/j.apenergy.2015.10.149 Wang, 2014, Pebax–PEG–MWCNT hybrid membranes with enhanced CO2 capture properties, J. Membr. Sci., 460, 62, 10.1016/j.memsci.2014.02.036 Li, 2016, Simultaneous enhancement of mechanical properties and CO2 selectivity of ZIF-8 mixed matrix membranes: interfacial toughening effect of ionic liquid, J. Membr. Sci., 511, 130, 10.1016/j.memsci.2016.03.050 Jomekian, 2017, Ionic liquid-modified Pebax® 1657 membrane filled by ZIF-8 particles for separation of CO2 from CH4, N2 and H2, J. Membr. Sci., 524, 652, 10.1016/j.memsci.2016.11.065