Dry Machining and Minimum Quantity Lubrication

Schirsch, 1998, Wirtschaftlichkeit der Trockenbearbeitung, Trockenbearbeitung prismatischer Teile, VDI-Berichte, 1375, 371 Weinert, 1995, Was kostet die Kühlschmierung?, Technica, 44/7, 19 Thamke, D., 1998, Technologische und okonomische Aspekte der Trocken- und Minimalmengenbearbeitung am Beispiel des Einlippentiefbohrens, PhD-thesis, University of Dortmund, Germany. Kissler, 2000, KSS-bedingte Kosten in der spanenden Metallbearbeitung als Anreiz fur die Trockenbearbeitung, 12th International Colloquium Tribology 2000 - Plus, Conference Proc., 2, 901 Chen, 1999, Cutting Fluid Aerosol Generation due to Spin-off in Turning Operation, Symposium on Manufacturing Science and Engineering, Conference Proc. ASME, 10, 285 Gunter, 1999, An Experimental Investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning, Journal of Cleaner Production, 7/5, 341, 10.1016/S0959-6526(99)00150-X Hands, 1996, Comparison of Metalworking Fluid Mist Exposures from Machining with Different Levels of Machine Enclosure, American Industrial Hygiene Association Journal, 57/12, 1173, 10.1080/15428119691014305 Howes, 1991, Environmental Aspects of Grinding Fluids, Annals of the CIRP, 40/2, 623, 10.1016/S0007-8506(07)61138-X Rossmoore, 1995, Microbiology of Metal-working Fluids: Deterioration, Disease, and Disposal, Lubrication Engineering, 51/2, 113 Aronson, 1995, Why Dry Machining?, Manufacturing Engineering, 114/1, 33 Klocke, 1996, Mindermengenkühlschmierung - eine Alternative zur Nassberarbeitung?, VDI-Berichte, 1240, 159 Weinert, K., Biermann, D., Thamke, D., 1996, Möglichkeiten und Grenzen verschiedener Kühlschmierstoffkonzepte bei der spanenden Bearbeitung, DGM-Conference Reibung und Verschleiß, Bad Nauheim, Germany, Mar. 21-22: 97-108. Sutherland, 2000, An Experimental Investigation of Air Quality in Wet and Dry Turning, Annals of the CIRP, 49/1, 61, 10.1016/S0007-8506(07)62896-0 Weinert, 1999 Daniel, C. M., Olson, W. W., Sutherland, J. W., 1997, Research Advances In Dry and Semi-dry Machining, SAE Technical Paper No. 970415 and SAE Transactions, Journal of Materials and Manufacturing, 106: 373-383. Schulte, K., 2000, Stahlbearbeitung mit Wendeschneidplatten-Bohrern bei reduziertem Kuhlschmierstoff-Durchsatz, PhD-thesis, University of Dortmund, Germany. König, 1999 Klocke, F., Schulz, A., Gerschwiler, K., 1996, Saubere Fertigungstechnologien - Ein Wettbe-werbsvorteil von morgen?, Aachener Werkzeug-maschinen-Kolloquium, Conference Proc., June 13-14:4.354.108. Klocke, F., Gerschwiler, K., 2003, Minimalmengenschmierung - Systeme, Medien, Einsatzbeispiele und ökonomische Aspekte der Trockenbearbeitung, Trockenbearbeitung von Metallen, Proc. of the VDI-Seminar, Stuttgart, Mar. 18:2.1-2.20. Aoyama, 2002, Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication, Annals of the CIRP, 51/1, 289, 10.1016/S0007-8506(07)61519-4 Machado, 1997, The Effect of Extremely Low Lubricant Volumes in Machining, Wear, 210, 76, 10.1016/S0043-1648(97)00059-8 Lamers, 2001, Nomen est omen - Kuhlt die Minimalmengen-Kuhlschmierung? Chandrasekaran, 1998, Modelling Tool Stresses and Temperature Evaluation in Turning using FEM, Machining Science and Technology, 1/2, 355, 10.1080/10940349808945676 Eisenblatter, G., 2000, Trockenbohren mit Vollhartmetallwerkzeugen, PhD-thesis, RWTH Aachen, Germany. Klocke, 1997, Dry Cutting, Annals of the CIRP, 46/2, 519, 10.1016/S0007-8506(07)60877-4 Suzuki, 2002, Developments in Oil Supplying Systems for MQL Cutting, Journal of Japanese Society of Tribologists, 47/7, 538 Wakabayashi, 1990, Evaluation of Cutting Fluids by Consumption Energy in Tapping Test, Lubrication Engineering, 46/11, 715 De Chiffre, 1994, Reaming Test for Cutting Fluid Evaluation, Journal of Synthetic Lubrication, 11/1, 17, 10.1002/jsl.3000110103 Haan, 1997, An Experimental Study of Cutting Fluid Effects in Drilling, Journal of Materials Processing Technology, 71, 305, 10.1016/S0924-0136(97)00089-7 De Chiffre, 2000, Comparison of Methods for Cutting Fluid Performance Testing, Annals of the CIRP, 49/1, 57, 10.1016/S0007-8506(07)62895-9 Vieira, 2001, Performance of Cutting Fluids during Face Milling of Steels, Journal of Materials Processing Technology, 116, 244, 10.1016/S0924-0136(01)01010-X Avila, 2001, The Effect of Cutting Fluids on the Machining of Hardened AISI 4340 Steel, Journal of Materials Processing Technology, 119, 21, 10.1016/S0924-0136(01)00891-3 Axinte, 2003, A Multicriteria Model for Cutting Fluid Evaluation, Proc. of Instn. Mechanical Engineers, Part B: Journal of Engineering Manufacturing, 217, 1341, 10.1243/095440503322617117 De Chiffre, 1980, Mechanical Testing and Selection of Cutting Fluids, Journal of the Society of Tribologists and Lubrication Engineers, 36, 514 Suda, 2002, Developments in cutting fluids for MQL cutting, Journal of Japanese Society of Tribologists, 47/7, 550 Routio, 1995, Tool Wear and Failure in the Drilling of Stainless Steel, Journal of Materials Processing Technology, 52, 3543, 10.1016/0924-0136(94)01441-3 Belluco, 2001, Testing of Vegetable-Based Cutting Fluids by Hole Making Operations, Lubrication Engineering, 57/1, 12 Axinte, 2001, Reliable Tool Life Measurements in Turning, International Journal on Machine Tools and Manufacturing, 41/1, 1003, 10.1016/S0890-6955(00)00110-3 Todd, 2003, Evaluation of Aged and Recycled Metalworking Fluids by the Tapping Torque, Lubrication Engineering, 59/2, 10 Suda, 2002, A Synthetic Ester as an Optimal Cutting Fluid for Minimal Quantity Lubrication Machining, Annals of the CIRP, 51/1, 95, 10.1016/S0007-8506(07)61474-7 McCabe, 2001, Performance Experience with Near-Dry Machining of Aluminum, Lubrication Engineering, 57/12, 22 N. N., 1996, Biodegradable Fluids and Lubricants, Industrial Lubrication and Tribology, 48/2, 17 Suda, S., Yokota, H., Komatsu, F., Inasaki, I., Wakabayashi, T., 2001, Evaluation of Machinability with MQL System and Effectiveness in Production Lines, Proc. of the International Tribology Conference, Nagasaki, Japan, Oct. 29 - Nov. 2 2000, 1:203-208. N. N., 2001 Freiler, C., 2004, Kühlschmierstoffe - Trends im Wandel der Zeit, Tribology and Lubrication Engineering, Proc. of the 14. International Colloquium Tribology, Ostfildern, Germany, Jan. 13-15/2: 797-811. Karino, 2002, Developments in Cutting Tools for MQL Cutting, Journal of Japanese Society of Tribologists, 47/7, 544 Klocke, 1998, Minimal-mengenkühlschmierung - Systeme, Werkzeuge und Medien, Trockenbearbeitung prismatischer Teile, VDI-Berichte, 1375, 197 Kammermeier, 2001, Schneidstoff- und Beschichtungsentwicklung für das Trockenbohren, VDI-Z Integrierte Produktion, 2001/11, 23 Hänle, 2003, MMS-gerechte Gestaltung des Bohrerschaftes, Werkstatt und Betrieb, 136/9, 54 Jost, 1966 N. N., 1979 Dreyer, 1997, Schneidstoffe für die Trockenbearbeitung, Werkstatt und Betrieb, 130/6, 420 Byrne, 2003, Advancing Cutting Technology, Annals of the CIRP, 52/2, 483, 10.1016/S0007-8506(07)60200-5 Weinert, K., 2003, Einsatz moderner Schneidstoffe in der Zerspanung, In: Kolaska, H., 2003, Pulvermetallurgie in Wissenschaft und Praxis, 19: 71-95. Ettmayer, 1995, Ti(C,N) Cermets - Metallurgy and Properties, International Journal of Refractory Metals and Hard Materials, 16/6, 343, 10.1016/0263-4368(95)00027-G Porat, 1990, New Approach of Cutting Tool Materials - Cermets, Annals of the CIRP, 39/1, 71, 10.1016/S0007-8506(07)61005-1 Hesterberg, S., 2001, Technological Aspects of Dry Machining, Proc. of the International Conference on Cutting Tools and Machining Systems, Atlanta, USA, May 21-23. Narutaki, 1997, A New Advanced Ceramic for Dry Machining, Annals of the CIRP, 46/1, 4348 Tönshoff, 1995, CBN Grinding with Small Wheels, Annals of the CIRP, 44/1, 311, 10.1016/S0007-8506(07)62332-4 Cselle, 1995, Today's Application and Future Development of Coatings for Drills and Rotating Cutting Tools, Surface & Coating Technology, Proc. of the 22nd International Conference, 76-77/1-3, 712 Cselle, 1999, Tools and Coatings for Dry Machining - Werkzeuge und Beschichtungen fur die Trockenbearbeitung, Proc. of the 1999 Global Powertrain Congress, 12, 86 Klocke, 1999, Coated Tools for Metal Cutting - Features and Applications, Annals of the CIRP, 42/2, 515, 10.1016/S0007-8506(07)63231-4 Van den Berg, H., Westphal, H., Tabersky, R., Sottke, V., Konig, U., 2002, Development and Applications of New Composite and Multilayer Coatings, European Conference on Hard Materials and Diamond Tooling, Lausanne, France, Oct. 7-9. Ducros, 2003, Deposition, Characterization and Machining Performance of Multilayer PVD Coatings on Cemented Carbide Cutting Tools, Surface and Coatings Technology, 163-164/30, 681, 10.1016/S0257-8972(02)00656-4 Cselle, 2003, LARC: Neue, industrielle Beschichtungstechnologie, Werkstatt und Betrieb, 136/3, 12 Kustas, 1997, Nanocoatings on Cutting Tools for Dry Machining, Annals of the CIRP, 46/1, 39, 10.1016/S0007-8506(07)60771-9 Fuss, H.-G., 2002, Neueste Entwicklungen zur Beschichtung von Hochleistungswerkzeugen -Trends und Ergebnisse, Proc. of the 5th Schmalkaldener Werkzeugtagung, Schmalkalden, Germany, Nov. 6-7: 1-6. Erkens, 2003, Supernitrides: A Novel Generation of PVD Hardcoatings to meet the Requirements of High Demanding Cutting Applications, Annals of the CIRP, 52/1, 65, 10.1016/S0007-8506(07)60532-0 Derflinger, 1999, New Hard/Lubricant Coating for Dry Machining, Surface and Coatings Technology, 113/3, 286, 10.1016/S0257-8972(99)00004-3 Uhlmann, 2003, CBN Coatings on Cutting Tools, WGP Annals, X/2, 32 Braga, 2002, Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminum-Silicon Alloys, Journal of Materials Processing Technology, 122/1, 127, 10.1016/S0924-0136(01)01249-3 Uhlmann, E., Brücher, M., 2003, Tribological Behavior of CVD Diamond Tools, Proc. of the 7th Applied Diamond Conference / Third Frontier Carbon Technology Joint Conference, NASNCP-2003-212319, Tsukuba, Japan, Aug. 18-21: 191-196. Uhlmann, 2002, Wear Behavior of CVD-Diamond Tools, Annals of the CIRP, 51/1, 49, 10.1016/S0007-8506(07)61463-2 Uhlmann, E., Kott, R., 2003, Wear Behavior of Thin CVD Diamond Films during the Interrupted Cut, Proc. of the 7th Applied Diamond Conference / Third Frontier Carbon Technology Joint Conference, Tsukuba, Japan, Aug. 18-21: 228-233. Uhlmann, E., Kott, R., 2002, Investigation on the Wear Behavior of Diamond Coated Taps, Proc. of the 3rd International Conference THE Coatings, Thessaloniki, Greece, Nov. 28-29: 149-156. Uhlmann, 2001, Adhasiver VerschleilJ von CVD-Diamant, Industrie Diamanten Rundschau, 35/4, 281 Kelly, 2002, Minimal Lubrication Machining of Aluminum Alloys, Journal of Material Processing Technology, 120/1-3, 327, 10.1016/S0924-0136(01)01126-8 Um, 1995, Experimental Investigation of The Application of the Spray Cooling Method in Stainless Steel Machining, American Society of Mechanical Engineers, Manufacturing Engineering Division, 2-1, 165 Shaw, 1984 Kajdas, 1989, Additives for Metalworking Lubricants - a Review, Lubrication Science, 1/4, 385, 10.1002/ls.3010010406 Cassin, 1965, Lubricating Action of Cutting Fluids, Journal of Mechanical. Engineering Science, 7/1, 67, 10.1243/JMES_JOUR_1965_007_012_02 Smith, 1988, Theoretical Analysis of Cutting Fluid Interaction in Machining, Tribology International, 215, 239, 10.1016/0301-679X(88)90001-1 Rowe, 1963, The Importance of Oxygen in Dry Machining of Metal on a Lathe, British Journal of Applied Physics, 14, 924, 10.1088/0508-3443/14/12/325 Rowe, G. W., Smart, F. F., 1964-65, Experiments on Lubrication Breakdown in Friction Tests and in Cutting of Metal on a Lathe, Proc. of the Instn. Mechanical Engineers, 179/Part3J: 229-245. Rowe, G. W., Smart, F. F., 1966-67, Vapour Lubrication in Friction and Low-speed Metal Cutting, Proc. of the Instn. Mechanical Engineers, 181/Part30: 48-57. Williams, 1977, The Role of Lubricants in Machining, Wear, 43, 275, 10.1016/0043-1648(77)90125-9 Wakabayashi, 1992, 33 Wakabayashi, 1993, The Action of Gaseous Lubricants in the Orthogonal Machining of an Aluminum Alloy by Titanium Nitride Coated Tools, Surface and Coatings Technology, 57, 183, 10.1016/0257-8972(93)90038-P Wakabayashi, 1995, The Kinetics of Gas-phase Lubricants in the Orthogonal Machining of an Aluminum Alloy, Journal of Engineering Tribology, 209, 131 Mori, 1982, Chemisorption of Organic Compounds on a Clean Aluminum Surface Prepared by Cutting under High Vacuum, ASLE Transactions, 25/2, 261, 10.1080/05698198208983089 Wakabayashi, 2003, Tribological Characteristics and Cutting Performance of Lubricant Esters for Semi-Dry Machining, Annals of the CIRP, 52/1/2003, 61, 10.1016/S0007-8506(07)60531-9 Hayashi, 2003, A Controlled Atmosphere Cutting Apparatus for Understanding Tribological Behavior of Lubricants in Near-dry Machining, Advances in Abrasive Technology (ISAAT2003), VI, 9 N. N., 2002, Microlubrication, Metal Machining Operations, WMRC Reports, Machining Xcellence, A Division of TechSolve Inc. Diniz, 2002, Cutting Conditions for Finish Turning Process - Aiming: The Use of Dry Cutting, International Journal of Machine Tools and Manufacture, 42, 899, 10.1016/S0890-6955(02)00028-7 Heisel, 1994, Application of Minimal Quantity Cooling Lubrication Technology in Cutting Process, Production Engineering, 2/1, 49 Inasaki, 2002, Technological Trends in MQL Cutting, Journal of Japanese Society of Tribologists, 47/7, 519 Tönshoff, 1994, Reducing Use of Coolants in Cutting Processes, Production Engineering, 1/2, 5 Adams, C., 2002, Trockenbearbeitung in der industriellen Anwendung, Perspektiven der Zerspantechnik - Entwicklung und Integration der Fertigungsprozesse von morgen, Conference Proc., Aachen, Germany, Oct. 29-30: 67-80. Rahman, 2002, Experimental Evaluation On The Effect of Minimal Quantities of Lubricant in Milling, International Journal of Machine Tools and Manufacture, 425, 539, 10.1016/S0890-6955(01)00160-2 Rahman, 2001, Evaluation of Minimal Quantities of Lubricant in End Milling, International Journal of Advanced Manufacturing Technology, 18/4, 235, 10.1007/s001700170063 Leopold, 2000, Trockenfräsen von Formnuten, VDI-Berichte, 1532, 43 Wang, 1999, The Effect of Tool Flank Wear on the Heat Transfer, Thermal Damage and Cutting Mechanics in Finish Hard Turning, 48/1, 53 Varadarajan, 2002, Investigations on Hard Turning With Minimal Cutting Fluid Application (HTMF) and Its Comparison with Dry and Wet Turning, International Journal of Machine Tools and Manufacture, 42, 193, 10.1016/S0890-6955(01)00119-5 Drews, 2000, Dry Turning of Manual Transmission Shafts, Society of Automotive Engineers, Society of Automotive Engineers, Special Publication, SP-1542, 4144 Wakabaysaki, 1998, Turning Using Extremely Small Amount of Cutting Fluids, JSME, International Journal, Series C, 41/1, 143, 10.1299/jsmec.41.143 Weinert, K., Hesterberg, S., Wittkop, S., 2004, Trockendrehen von Passschrauben - Technologisch umsetzbar und wirtschaftlich sinnvoll, STAHL, 04/1122-24. Weinert, K., Schmidt, J., Klocke, F., Holland-Letz, K., 2003, Erfolgreiche Wege zur Trockenbearbeitung - Beratung und Unterstutzung durch das Technologienetz, Conference Proc., Frankfurt, Germany, Nov. 22. Klocke, 1997, Machinability Investigation of the Drilling Process using Minimal Cooling Lubrication Techniques, Production Engineering, 4, 19 Kammermeier, D., Kauper, H., Borchert, W., 2001, Die zweite Generation der Trockenzerspanung heißt High Performance Cutting (HPC), In: Weinert, K., 2001, Spanende Fertigung, Vulkan-Verlag, Essen, 3: 136-150. N. N., 2003 Kress, 2002 Krause, K., 2003, Drilling, Reaming and Threading - HPC-Machining in CGI, 6th Compacted Graphite Iron Machining Workshop, New Materials and Manufacturing Strategies for Powertrain Applications, Munich, Germany, Sept. 9-10. Palm, I., 2003, Trockenbearbeitung in der industriellen Fertigung, Trockenbearbeitung von Metallen, Proc. of the VDI-Seminar, Stuttgart, Germany, Mar. 18. Klocke, 2003, Trockenzerspanung von Schmiedeteilen - Chancen zur Kostensenkung nutzen, VDI-Z, 145/5, 33 Giessler, 2001, Kostenreduzierung bei der Trockenbearbeitung und Einsatz von Minimal-schmiertechnik (MMS), Konstruieren und Gießen, 26/11, 9 Linß, 2001, Gewindefrasen - ein flexibles Verfahren, Werkstatt und Betrieb, 134/12, 16 Schmidt, 2002, So gelingt das Raumen ohne Kuhlschmierstoff, Werkstatt und Betrieb, 135/12, 4446 Weule, 1999, Dry Machining for Gear Shaping, Production Engineering, VIA, 25 Hafenbraedl, 2000, Environmentally-Conscious Minimum Quantity Lubrication (MQL) for internal Cylindrical Grinding, Transactions of NAMRVSME, 28, 149 Pan, 2003, An ELlD Grinding System with a Minimum Quantity of Liquid, Key Engineering Materials, 238-239, 23, 10.4028/www.scientific.net/KEM.238-239.23 Tönshoff, 1995, Minimal-mengenkühlschmierung bei Schleifprozessen, Maschinenmarkt, 101/45, 30 Brinksmeier, E., Walter, A., 1996, Einsatzbeispiele für Minimalmengenkühlschmierung und Trockenbearbeitung, Proc. of the Conference on Tribology-Solving Friction and Wear Problems, Technische Akademie Esslingen, Ostfildern, Germany, Jan. 9-11:23-43. Brinksmeier, 1997, Bausteine für einen umweltverträglichen Feinbearbeitungs-prozess, Proc. of the IWF, 7, 19.01 Tönshoff, 1997, Particle Emission and Immission in Dry Grinding, Annals of the CIRP, 46/2, 693 Brinksmeier, E., Walter, A., Brockhoff, T., 1997, Minimum Quantity Lubrication in Grinding, 2nd International Machining and Grinding Conference, Dearborn, Michigan, USA, Sept. 8-11, SME-PaperMR97-230. Brockhoff, 1998, Fluid Minimization in Cutting and Grinding, Abrasive Magazine, 10/11, 28 Weck, M., Krell, M., Paepenmüller, F., 2002, Umsetzung innovativer Technologien in modernen Maschinenkonzepten, Perspektiven der Zerspantechnik - Entwicklung und Integration der Fertigungsprozesse von morgen, Conference Proc., Aachen, Germany, Oct. 29-30: 275-300 Johannsen, 1998, Anforderungen an die trockenbearbeitungsgerechte Werkzeug-maschine. Trockenbearbeitung prismatischer Teile, VDI-Berichte, 1375, 399 Konold, T., 2001, Maschinentechnik für die Trockenbearbeitung, VDI-Z lntegrierte Produktion, 143/4:61-63. Konold, 2001, Maschinentechnik für die Trockenbearbeitung, VDI-Z lntegrierte Produktion, 143/4, 61 N. N., 2001, Vertikale Pick-Up-Drehmaschinen, Maschinen Anlagen Verfahren, 3/2001. May, 2000, Technik auf den Kopf stellen, Werkstatt und Betrieb, 133/9, 32 Zeiher, 2000, Ein Konzept zur Trockenbearbeitung, Produktion Landsberg, 39/18, 64 Zielasko, W., Schirsch, R., Krummling, T., 2000, Anforderungen an die trockenbearbeitungsgerechte Werkzeugmaschine, Trockenbearbeitung -Drehen, Frasen, Bohren, Conference Proc., Dortmund, Germany, Mar. 29-30: 175-204. Kohlhase, 2000, Was bringt Mineralguss als Drehmaschinenbett?, Werkstatt und Betrieb, 6, 39 N. N., 2000, Schuss ins Schwarze. Vertikale Drehmaschine fur die trockene Bearbeitung schlanker Teile, Fertigung Landsberg, 28/6, 20 Makiyama, 2002, Developments in Machine Tools for MQL Cutting, Journal of Japanese Society of Tribologists, 47/7, 533 N. N., 1997, 122d Kälberer, 2001, Quasi Trockenbearbeitung im BAZ, Maschinen Anlagen Verfahren, 6, 66 Kainer, 2000 Kastner, J., Obermair, F., Vergara, C., 2002, Druckgussteile aus Magnesium und Magnesium-Legierungen gefahrlos bearbeiten, Austrian HSC-Conference, June 2002. Wassenhoven, J., 2000, Gefahren und Schutz-maßnahmen beim Umgang mit Magnesium, In: Kainer, K. U., 2000, Magnesium - Eigenschaften, Anwendungen, Potenziale, 1: 297-312 Wessel, 2001 Reibetanz, 1999, Trockenbearbeitungsgerechte Bearbeitungszentren und Transfer-maschinen, Praxis der Trockenbearbeitung, VDI-Berichte, 1458, 85 Johannsen, 1999, Die Werkzeugmaschine für die Trockenbearbeitung, Praxis der Trockenbearbeitung, VDI Berichte, 1458, 67 Feinauer, A., Friedrich, W., Haferkorn, W., Hennes, N., Hork, M., Krell, M., Lilla, A., Paepenmüller, F., Stave, H., Walker, B., Weck, M., Winkler, H. H., 2002, Werkzeugmaschinen fur die Produktion von morgen im Spannungsfeld, Aachener Werkzeugmaschinen Kolloquium, Conference Proc., Aachen, Germany, June 6-7: 373-409. Heisel, 2001, Effektive Absaugung bei der Bohr- und Frasbearbeitung, Zeitschrift fur Wirtschaftlichen Fabrikbetrieb, 9, 458, 10.3139/104.100464 Bonk, H, 1997, Brand- und Explosionsschutz bei der Magnesiumbearbeitung - Sicherheit und EG-Binnenmarkt, Bohren und Frasen im modernen Produktionsprozess, Conference Proc., Dortmund, Germany, May 21-22: 165-177. Weck, 2000, Zündender Funke -Nein danke! Maschinenkonzepte fur die sichere Zerspanung von Magnesiumbauteilen, Fertigung, 28/5, 22 Wassenhoven, 2001, Brände und Explosionen im Umgang mit Leichtmetallen, Sichere Handhabung brennbarer Staube, VDI-Berichte, 1601, 365 Christoffel, 2001, Entwicklungstendenz bei Werkzeugen und Schneidstoffen, 203 Westphal, H., Heinloth, M., van den Berg, H., Dreyer, K., Wurfels, A., Sottke, V., Tabersky, R., 2003, Hartmetalle für den Werkzeug und Formenbau, 3D-Erfahrungsforum Werkzeug und Formenbau, Conference Proc., Dortmund, Germany, Feb. 25-26: 223-234 Weinert, K., Loichinger, A., 2003, Cooling Lubricant Flow Analysis of Internally Supplied Machining Tools, 12th International Conference on Fluid Flow Technologies, Conference Proc., Budapest, Hungary, Sept. 3-6/2: 275-280 Stengele, 2003, Specht Xperimental, ein Hochgeschwindigkeits-Bearbeitungszentrum mit neuartiger Hybridkinematik, Innovative Wege in der Produktion, VDI-Berichte, 1762, 145 Köppel, 2003, Die GMX linear-Baureihe. Das innovative Maschinenkonzept für die Komplett-bearbeitung. In: Innovative Wege in der Produktion, VDI-Berichte, 1762, 43 Weck, 2002, Parallel Kinematic Machine Tools - Current State and Future Potentials, Annals of the CIRP, 51/2, 671, 10.1016/S0007-8506(07)61706-5 Schoppe, 2001, Alternative zum klassischen CNC-Zentrum, Werkstatt und Betrieb, 6, 16