Palladium and tantalum aluminide coatings for high-temperature oxidation resistance of titanium alloy IMI 834
Tóm tắt
The present article explains the efforts made in developing new protective coatings based on palladium, tantalum, and aluminum with considerably improved oxidation resistance for effective protection of titanium alloy IMI 834. Systematic characterization was carried out on as-prepared as well as oxidized coatings and these results are presented. The performance of new coatings was evaluated by generating weight-gain data as a function of time followed by detailed characterization in order to confirm the ability of the coatings to prevent oxidation and alpha-case formation. The results showed that tantalum aluminide and simple aluminide coatings exhibit improved oxidation resistance when compared to palladium aluminide. Finally, the advantages of developed new coatings and the necessity of their use in modern gas turbine engines that allow the alloy to be used safely at high temperatures, which in turn would enhance the efficiency of gas-turbine engine-compressor sections, will be stressed.
Tài liệu tham khảo
Williams, JC, “The Development of Advanced Gas Turbines: The Technical and Economic Development.” In: Cputsouradis, D et al (eds.) Materials for Advanced Power Engineering, p. 1831. Kluwer Academic, The Netherlands (1994)
I Gurrappa, AK Gogia, Oxidation Behavior of Titanium Alloy IMI 834 at Elevated Temperatures, Proceedings of the 5th National Convention on Corrosion, New Delhi, India, NACE International India Section, November (1999), pp. 210–219
I Gurrappa (2002) On the Degradation Mechanism of Titanium Aalloy IMI 834 in Oxidizing Atmospheres at Elevated Temperatures, Corr. Prev. & Control, 49, 79
I Gurrappa (2003) Mechanism of Degradation of Ttitanium Aalloy IMI 834 and Its Protection Under Hot Corrosion Conditions, Oxid. Met., 59, 321
Z Yao, Z Jiang, F Wang, G Hao (2007) Oxidation Behavior of Ceramic Coatings on Ti-6Al-4V by Micro-Plasma Oxidation, J. Mater. Process. Tech., 190, 117
H Zhou, F Li, B He, J Wang, B Sun (2007) Wang and B. Sun, Air Plasma Sprayed Thermal Barrier Coatings on Titanium Alloy Substrates, Surf. Coat. Tech., 202, 7360
Riviere, JP, Pichon, L, Drouet, M, Poquillon, D, Galdikas, A, “Silicon Based Coatings Deposited by Dynamic Ion Mixing for Oxidation Protection of a Ti6242 Aalloy.” Surf. Coat. Tech., 201 8343 (2007)
R Siab, G Bonnet, JM Brossard, J Balmain, JF Dinhut (2007) Effect of An Electrodeposited Yttrium Containing Thin Film on the High Temperature Oxidation Behavior of TA6V alloy, Appl. Surf. Sci., 253, 3425
I Gurrappa, D Manova, JW Gerlach, S Mandl, B Rauchenbach (2006) Effect of an Electrodeposited Yttrium Containing Thin Film on the High Temperature Oxidation Behavior of TA6V Alloy, J. Alloys. Comp., 426, 375
M Froehlich, R Braun, C Leyens (2006) Oxidation Resistant Coatings in Combination with Thermal Barrier Coatings on γ–TiAl Alloys for High Temperature Applications, Surf. Coat. Tech., 201, 3911
H P Xiong, W Mao, WL Ma, YH Xie, Y Feng, H Yuan, XH Li (2006) Liquid-Phase Aluminizing and Siliconizing at the Surface of a Ti60 Alloy and Improvement in Oxidation Resistance, Mater. Sci.Eng., A433, 108
H Li, C Costil, V Barnier, R Oltra, O Heintz, C Coddet (2006) Surface Modifications Induced by Nanosecond Pulsed Nd:YAG Laser Irradiation of Metallic Substrates, Surf. Coat. Tech., 201, 1383
Fox-Rabinovich GS, Wilkinson DS, Veldhuis SC, Dosboneva GK, Weatherly GC (2006) Oxidation Resistant Ti–Al–Cr Alloy for Protective Coating Applications, Intermetallics, 14, 189. doi:10.1016/j.intermet.2005.05.011
I Gurrappa, D Manova, JW Gerlach, S Mandl, B Rauchenbach (2006) Influence of Nitrogen Implantation on the High Temperature Oxidation of Titanium-Based Alloys, Surf. Coat. Tech., 201, 3536
HN Lee, ZM Park, MH Oh, KY Kim, DM Wee (1999) Oxidation Behavior and Mechanical Properties of Yttrium-Doped L12 (Al,Cr)3 Ti Coating on TiAl Alloys, Script Met., 41, 1073
I Gurrappa (2001) Platinum Aluminide Coatings for Oxidation Resistance of Titanium Alloys, Platinum Metals Rev., 45, 124
I Gurrappa (2001) Effect of Aluminizing on the Oxidation Behavior of the Titanium Alloy IMI 834, Oxid. Metals, 56, 73