Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products

Abbate, 2004, Understanding autoclaved aerated concrete, Constr. Specif., 57, 66

Ahmari, 2012, Production of eco-friendly bricks from copper mine tailings through geopolymerization, Constr. Build. Mater, 29, 323, 10.1016/j.conbuildmat.2011.10.048

Ahmari, 2013, Durability and leaching behavior of mine tailings-based geopolymer bricks, Constr. Build. Mater, 44, 743, 10.1016/j.conbuildmat.2013.03.075

Alexanderson, 1979, Relations between structure and mechanical properties of autoclaved aerated concrete, Cem. Concr. Res., 9, 507, 10.1016/0008-8846(79)90049-8

Andre, 1999, Fly ash from cellulose industry as secondary raw material in autoclaved aerated concrete, Cem. Concr. Res., 29, 297, 10.1016/S0008-8846(98)00207-5

Bensted, 2002

Bonaccorsi, 2005, The crystal structure of tobermorite 14 Å (Plombierite), a C-S-H phase, J. Am. Ceram. Soc., 88, 505, 10.1111/j.1551-2916.2005.00116.x

da Silvaa, 2014, Study of the recovery and recycling of tailings from the concentration of iron ore for the production of ceramic, Ceram. Int., 40, 16085, 10.1016/j.ceramint.2014.07.145

Das, 2000, Exploitation of iron ore for the development of ceramic tiles, Waste Manag., 20, 725, 10.1016/S0956-053X(00)00034-9

Das, 2002, Recovery of iron values from tailing dumps adopting hydrocyclone and magnetic separation techniques, Australas. Inst. Min. Metallurg. Publ. Ser., 2, 285

Du, 2014, Preparation and characteristics of steam-autoclaved bricks produced from electrolytic manganese solid waste, Constr. Build. Mater, 50, 291, 10.1016/j.conbuildmat.2013.09.055

Dudka, 1997, Environmental impacts of metal ore mining and processing: a review, J. Environ. Qual., 26, 590, 10.2134/jeq1997.00472425002600030003x

Fan, 2014, Synthesis and microstructure analysis of autoclaved aerated concrete with carbide slag addition, J. Wuhan Univ. Technol., 10, 1005, 10.1007/s11595-014-1034-0

Huang, 2012, Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag, Constr. Build. Mater, 27, 1, 10.1016/j.conbuildmat.2011.08.034

Isu, 1995, Influence of quartz particle size on the chemical and mechanical properties of autoclaved aerated concrete (I) tobermorite formation, Cem. Concr. Res., 25, 243, 10.1016/0008-8846(95)00003-8

Jerman, 2013, Hygric, thermal and durability properties of autoclaved aerated concrete, Constr. Build. Mater, 41, 352, 10.1016/j.conbuildmat.2012.12.036

Karakurt, 2010, Utilization of natural zeolite in aerated concrete production, Cem. Concr. Compos, 32, 1, 10.1016/j.cemconcomp.2009.10.002

Klimesch, 1999, DTA-TGA evaluations of the CaO -Al2O3 -SiO2 -H2O system treated hydrothermally, Thermochim. Acta, 334, 115, 10.1016/S0040-6031(99)00140-9

Kumar, 2013, Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization, Constr. Build. Mater, 38, 865, 10.1016/j.conbuildmat.2012.09.013

Kurama, 2009, Properties of the autoclaved aerated concrete produced from coal bottom ash, J. Mater Process Technol., 209, 767, 10.1016/j.jmatprotec.2008.02.044

Licsk, 1999, Tailings as a source of environmental pollution, Water Sci. Technol., 39, 333, 10.2166/wst.1999.0677

Li, 2011, Phase transformation of iron ore tailings during autoclaved curing, J. Chin. Ceram. Soc., 39, 708

Mirza, 1986, Utilisation of Saudi sands for aerated concrete production, Int. J. Cem. Compos. Lightweight Concr., 8, 81, 10.1016/0262-5075(86)90002-3

Moreno, 2006, Long-term environmental impact of tailings deposits, Hydrometallurgy, 83, 176, 10.1016/j.hydromet.2006.03.052

Mostafa, 2005, Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete, Cem. Concr. Res., 35, 1349, 10.1016/j.cemconres.2004.10.011

Narayanan, 2000, Structure and properties of aerated concrete: a review, Cem. Concr. Compos, 22, 321, 10.1016/S0958-9465(00)00016-0

Oh, 2012, Experimental determination of bulk modulus of 14 Å tobermorite using high pressure synchrotron X-ray diffraction, Cem. Concr. Res., 42, 397, 10.1016/j.cemconres.2011.11.004

Sirkeci, 2006, Recovery of Co, Ni, and Cu from the tailings of divrigi iron ore concentrator, Mineral Process. Extr. Metallurg. Rev., 27, 131, 10.1080/08827500600563343

Tanrıverdi, 2006, Toxic elements leach ability tests on autoclaved fly ash-lime bricks, Asian J. Chem., 18, 2310

The State Environmental Protection Administration of the People's Republic of China, 2007

Yang, 2000

Yang, 2014, Characteristics of the fired bricks with low-silicon iron tailings, Constr. Build. Mater, 70, 36, 10.1016/j.conbuildmat.2014.07.075

Zhang, 2013, Production of bricks from waste materials–A review, Constr. Build. Mater, 47, 643, 10.1016/j.conbuildmat.2013.05.043

Zhang, 2006, Current situation and comprehensive utilization of iron ore tailing resources, J. Min. Sci., 4, 403

Zhao, 2014, Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete, Constr. Build. Mater, 50, 540, 10.1016/j.conbuildmat.2013.10.019

Zhao, 2009, Autoclaved brick from low-silicon tailings, Constr. Build. Mater, 23, 538, 10.1016/j.conbuildmat.2007.10.013