Small-strain stiffness of sand subjected to stress anisotropy

Bellotti, 1996, Anisotropy of small strain stiffness in Ticino sand, Geotechnique, 46, 115, 10.1680/geot.1996.46.1.115 Cho, 2006, Particle shape effects on packing density, stiffness, and strength: natural and crushed sands, J Geotech Geoenviron Eng, 132, 591, 10.1061/(ASCE)1090-0241(2006)132:5(591) Edil, 1978, Dynamic modulus and damping relationships for sands, Soil Dyn Earthq Eng, 1, 394 Hardin, 1968, Sand stiffness under various triaxial stresses, J Soil Mech Found Div, 94, 353, 10.1061/JSFEAQ.0001100 Hardin, 1989, Elasticity of particulate materials, J Geotech Eng, 115, 788, 10.1061/(ASCE)0733-9410(1989)115:6(788) Hardin, 1963, Elastic wave velocities in granular soils, J Soil Mech Found Div, 89, 33, 10.1061/JSFEAQ.0000493 Iwasaki, 1977, Effects of grain size and grading on dynamic shear moduli of sands, Soils Found, 17, 19, 10.3208/sandf1972.17.3_19 Jovičić, 1998, The measurement of stiffness anisotropy in clays with bender element tests in the triaxial apparatus, Geotech Test J, 21, 3, 10.1520/GTJ10419J Jovičić, 1996, Objective criteria for determining Gmax from bender element tests, Geotechnique, 46, 357, 10.1680/geot.1996.46.2.357 Kramer, 1990, Analysis of membrane penetration in triaxial test, J Eng Mech, 116, 773, 10.1061/(ASCE)0733-9399(1990)116:4(773) Krumbein, 1963 Lee, 2005, Bender elements: performance and signal interpretation, J Geotech Geoenviron Eng, 131, 1063, 10.1061/(ASCE)1090-0241(2005)131:9(1063) Lo Presti D, O’Neill DA. Laboratory investigation of small strain modulus anisotropy in sand. In: calibration chamber testing: proc., first int. symp. on calibration chamber testing/ISOCCT1. Elsevier, New York; 1991, p. 213–24. Menq, 2003 Ni SH. Dynamic properties of sand under true triaxial stress states from resonant column and torsion shear tests [Ph.D. thesis]. 1987, The University of Texas in Austin. Payan M, Khoshghalb A, Senetakis K, Khalili N. Effect of particle shape and validity of Gmax models for sand: a critical review and a new expression. 2016, Computers and Geotechnics. vol. 72, p. 28–41. Rampello, 1997, Small-strain stiffness of reconstituted clay compressed along constant triaxial effective stress ratio paths, Geotechnique, 47, 475, 10.1680/geot.1997.47.3.475 Roesler, 1979, Anisotropic shear modulus due to stress anisotropy, J Geotech Eng Div, 105, 871, 10.1061/AJGEB6.0000835 Santamarina, 1996, Stress anisotropy and wave propagation: a micromechanical view, Can Geotech J, 33, 770, 10.1139/t96-102-323 Senetakis, 2012, Small strain shear modulus and damping ratio of quartz and volcanic sands, Geotech Test J, 35, 1, 10.1520/GTJ20120073 Stokoe KH II, Hwang SK, Lee JNK, Andrus RD. Effects of various parameters on the stiffness and damping of soils at small to medium strains. In: prefailure deformation of geomaterials: proc., int. symp. on pre-failure deformation characteristics of geomaterials. Balkema, Rotterdam; 1995, p. 785–816. Viggiani, 1995, Stiffness of fine-grained soil at very small strains, Geotechnique, 45, 249, 10.1680/geot.1995.45.2.249 Viggiani, 1995, Interpretation of bender element tests, Geotechnique, 45, 149, 10.1680/geot.1995.45.1.149 Wang, 2008, Mechanisms of small-strain shear modulus anisotropy in soils, J Geotech Geoenviron Eng, 134, 1516, 10.1061/(ASCE)1090-0241(2008)134:10(1516) Wichtmann, 2009, Influence of the grain-size distribution curve of quartz sand on the small strain shear modulus Gmax, J Geotech Geoenviron Eng, 135, 1404, 10.1061/(ASCE)GT.1943-5606.0000096 Yamashita, 2005, Effects of initial and induced anisotropy on initial stiffness of sand by triaxial and bender elements tests, 350 Yu, 1984, Stress ratio effects on shear modulus of dry sands, J Geotech Eng, 110, 331, 10.1061/(ASCE)0733-9410(1984)110:3(331) Zeng, 1999, Stress-induced anisotropic Gmax of sands and its measurement, J Geotech Geoenviron Eng, 125, 741, 10.1061/(ASCE)1090-0241(1999)125:9(741)