Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete

Mehta, 2006 Guo, 2009, Current situation and comprehensive utilization of iron ore tailings resources in our country, Mod Min, 30, 23 Richard, 1995, Composition of reactive powder concretes, Cem Concr Res, 25, 1501, 10.1016/0008-8846(95)00144-2 Yazıcı, 2009, Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes, Constr Build Mater, 23, 1223, 10.1016/j.conbuildmat.2008.08.003 Yazıcı, 2010, Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag, Cem Concr Compos, 32, 639, 10.1016/j.cemconcomp.2010.07.005 Rong, 2012, Experimental and numerical investigation on the dynamic tensile behavior of ultra-high performance cement based composites, Constr Build Mater, 31, 168, 10.1016/j.conbuildmat.2011.12.058 Yang, 2009, Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC), Constr Build Mater, 23, 2291, 10.1016/j.conbuildmat.2008.11.012 Katz, 2003, Properties of concrete made with recycled aggregate from partially hydrated old concrete, Cem Concr Res, 33, 703, 10.1016/S0008-8846(02)01033-5 Khatib, 2005, Properties of concrete incorporating fine recycled aggregate, Cem Concr Res, 35, 763, 10.1016/j.cemconres.2004.06.017 Torkittikul, 2010, Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes, Cem Concr Compos, 32, 440, 10.1016/j.cemconcomp.2010.02.004 GB175-2007. Common portland cements; 2007. [in Chinese]. Miller, 2008, Surface roughness criteria for cement paste nanoindentation, Cem Concr Res, 38, 467, 10.1016/j.cemconres.2007.11.014 GB/T 2419–2005. Test method for fluidity of cement mortar; 2005. [in Chinese]. Westerholm, 2008, Influence of fine aggregate characteristics on the rheological properties of mortars, Cem Concr Compos, 30, 274, 10.1016/j.cemconcomp.2007.08.008 GB/T17671-1999. Method of testing cements – determination of strength; 1999. [in Chinese]. Washburn, 1921, Note on a method of determining the distribution of pore sizes in porous materials, Proc Natl Acad Sci, USA, 7, 115, 10.1073/pnas.7.4.115 Diamond, 2000, Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials, Cem Concr Res, 30, 1517, 10.1016/S0008-8846(00)00370-7 Garboczi, 1999, Percolation aspects of cement paste and concrete-properties and durability, Am Concr Inst Spring Convent, Spec Publ, 189, 147 Zain, 2000, Physical properties of high-performance concrete with admixtures to a medium temperature range 20 °C to 50 °C, Cem Concr Res, 30, 1283, 10.1016/S0008-8846(00)00294-5 Donza, 2002, High-strength concrete with different fine aggregate, Cem Concr Res, 32, 1755, 10.1016/S0008-8846(02)00860-8 Toutanji, 1999, Effect of curing procedures on properties of silica fume concrete, Cem Concr Res, 29, 497, 10.1016/S0008-8846(98)00197-5 Cao, 2000, The analysis on strength and fly ash effect of roller-compacted concrete with high volume fly ash, Cem Concr Res, 30, 71, 10.1016/S0008-8846(99)00203-3 Naaman AE. Strain hardening and deflection hardening fiber reinforced cement composites. In: Proceedings of the international RILEM workshop high performance fiber reinforced cementitious composites HPFRCC4, Ann Arbor, MI; 2003. pp. 95–113. De Koker D, Van Zijl G. Extrusion of engineered cement-based composite material. In: 6th RILEM symposium on fiber-reinforced concretes, September 20–22, Varenna, Italy; 2004. pp. 1301–10. Scrivener, 2004, The interfacial transition zone (ITZ) between cement paste and aggregate in concrete, Interface Sci, 12, 411, 10.1023/B:INTS.0000042339.92990.4c Sun W, Zhao S. Characterizing the microstructure of UHPCC with high-volume fly ash addition by nanoindentation. In: Proceedings of the 13th international congress on the chemistry of cement (13th ICCC), July 3–8, Madrid; 2011. (CD). Scrivener, 1988, Quantitative characterization of the transition zone in high strength concretes, Adv Cem Res, 1, 230, 10.1680/adcr.1988.1.4.230