Engineering properties of self-cured normal and high strength concrete produced using polyethylene glycol and porous ceramic waste as coarse aggregate

Agwa, 2020, Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete, Constr. Build. Mater., 235, 10.1016/j.conbuildmat.2019.117541 Tayeh, 2019, Properties of concrete containing recycled seashells as cement partial replacement: a review, J. Cleaner Prod., 237, 10.1016/j.jclepro.2019.117723 Wyrzykowski, 2016, Effect of relative humidity decrease due to self-desiccation on the hydration kinetics of cement, Cem. Concr. Res., 85, 75, 10.1016/j.cemconres.2016.04.003 Hayri, 2011, The effect of curing temperature and relative humidity on the strength development of Portland cement mortar, Sci. Res. Essays, 6, 2504 Neville, 2011 Saengsoy, 2008, Influence of relative humidity on compressive strength of fly ash cement paste, J. Struct. Constr. Eng., 73, 1433, 10.3130/aijs.73.1433 W.-C. Jau, Self-curing concrete, Google Patents, 2011. Han, 2017 Bentz, 2005, Mixture proportioning for internal curing, Concr. Int., 27, 35 Al Saffar, 2019, Effect of internal curing on behavior of high performance concrete: an overview, Case Stud. Constr. Mater., 10 Malathy, 2020, Characteristics of fly ash based concrete prepared with bio admixtures as internal curing agents, Constr. Build. Mater., 262, 10.1016/j.conbuildmat.2020.120596 V. Chaitanya, K. Deepthi, An experimental study on mechanica properties of M25 grade self curing concrete with fly ash as partial replacement of cement, (2019). El-Dieb, 2020, Performance of self-curing concrete as affected by different curing regimes, Adv. Concr. Constr., 9, 33 Ogawa, 2020, Effects of porous ceramic roof tile waste aggregate on strength development and carbonation resistance of steam-cured fly ash concrete, Constr. Build. Mater., 236, 10.1016/j.conbuildmat.2019.117462 Bui, 2017, Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate, Mater. Struct., 50, 203, 10.1617/s11527-017-1073-z M. Safan, M. Afify, A. Ibrahim, Performance of Self-curing Concrete Cast using Super Absorbent Polymers as a Curing Agent under Several Curing Conditions, Journal of Structural Engineering, its Applications and Analysis 2(1, 2, 3) (2019). K. Gopala krishna sastry, P.m. kumar, Self-curing concrete with different self-curing agents, IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2018, p. 012120. Rizzuto, 2020, Effect of self-curing admixture on concrete properties in hot climate Conditions, Constr. Build. Mater., 261, 10.1016/j.conbuildmat.2020.119933 Liu, 2017, An overview on the effect of internal curing on shrinkage of high performance cement-based materials, Constr. Build. Mater., 146, 702, 10.1016/j.conbuildmat.2017.04.154 Savva, 2018, Highly absorptive normal weight aggregates for internal curing of concrete, Constr. Build. Mater., 179, 80, 10.1016/j.conbuildmat.2018.05.205 Bashandy, 2017, Comparative study on the using of PEG and PAM as curing agents for self-curing concrete, Challenge J. Concr. Res. Lett., 8, 1, 10.20528/cjcrl.2017.01.001 Mehrinejad Khotbehsara, 2017, Durability characteristics of self-compacting concrete incorporating pumice and metakaolin, J. Mater. Civ. Eng., 29, 04017218, 10.1061/(ASCE)MT.1943-5533.0002068 Zeyad, 2018, Workability, setting time and strength of high-strength concrete containing high volume of palm oil fuel ash, Open Civ. Eng. J., 12, 10.2174/1874149501812010035 N.V. Tuan, G. Ye, K. van Breugel, Mitigation of early age shrinkage of ultra high performance concrete by using rice husk ash, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials: Ultra-High Performance Concrete and Nanotechnology in Construction (HIPERMAT-2012), Kasse University Press GmbH, 2012, pp. 341-348. Huang, 2015, Effect of porous superfine powder on the performance of ultra-high performance concrete, Bull. Chin. Ceram. Soc., 7, 22 Al Saffar, 2018, Influence of pottery clay in cement mortar and concrete mixture: a review, Int. J. Eng. Technol., 7, 67, 10.14419/ijet.v7i4.20.25852 Sathanandham, 2013, Preliminary studies of self curing concrete with the addition of polyethylene glycol, Int. J. Eng. Res. Technol., 2, 313 U. Choubey, G. Raghuvanshi, A STUDY ON PROPERTIES OF SELF-CURING CONCRETE USING POLYETHYLENE GLYCOL-400, International Journal of Research in Engineering and Technology, eISSN (2017) 2395-0056. Troli, 2005, Self-compacting/curing/compressing concrete, admixtures-enhancing concrete performance, 113 Vijayan, 2020, An experimental study on mechanical and durable properties of self-curing concrete by adding admixture, Mater. Today:. Proc. Madduru, 2020, Hydrophilic and hydrophobic chemicals as self curing agents in self compacting concrete, J. Build. Eng., 28 El-Dieb, 2007, Self-curing concrete: water retention, hydration and moisture transport, Constr. Build. Mater., 21, 1282, 10.1016/j.conbuildmat.2006.02.007 Jensen, 2006, Techniques and materials for internal water curing of concrete, Mater. Struct., 39, 817, 10.1617/s11527-006-9136-6 Abid, 2018, Expansion and strength properties of concrete containing contaminated recycled concrete aggregate, Case Stud. Constr. Mater., 9 Wu, 2017, Internal curing effect on strength of recycled concrete and its enhancement in concrete-filled thin-wall steel tube, Constr. Build. Mater., 153, 824, 10.1016/j.conbuildmat.2017.07.117 Zeyad, 2020, Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers, J. Mater. Res. Technol., 9, 806, 10.1016/j.jmrt.2019.11.021 Zeyad, 2019, Strength and transport characteristics of volcanic pumice powder based high strength concrete, Constr. Build. Mater., 216, 314, 10.1016/j.conbuildmat.2019.05.026 Shen, 2017, Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate, Constr. Build. Mater., 135, 420, 10.1016/j.conbuildmat.2016.12.187 Amin, 2020, Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures, Case Stud. Constr. Mater., 13 Cusson, 2008, Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking, Cem. Concr. Res., 38, 757, 10.1016/j.cemconres.2008.02.001 Abed, 2020, Properties of self-compacting high-strength concrete containing multiple use of recycled aggregate, J. King Saud Univ.-Eng. Sci., 32, 108 Tayeh, 2017, Investigating the effect of sulfate attack on compressive strength of recycled aggregate concrete, J. Eng. Res. Technol., 4 Ghourchian, 2013, An investigation on the use of zeolite aggregates for internal curing of concrete, Constr. Build. Mater., 40, 135, 10.1016/j.conbuildmat.2012.10.009 Lura, 2014, Internal curing with lightweight aggregate produced from biomass-derived waste, Cem. Concr. Res., 59, 24, 10.1016/j.cemconres.2014.01.025 Ranjbar, 2013 Haido, 2021, Experimental and numerical studies on flexural behavior of high strength concrete beams containing waste glass, Adv. Concr. Constr., 11, 239 Zeyad, 2021, The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete, Constr. Build. Mater., 280, 10.1016/j.conbuildmat.2021.122409 Zeyad, 2021, Influence of steam curing regimes on the properties of ultrafine POFA-based high-strength green concrete, J. Build. Eng., 38 Faried, 2021, The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties, Constr. Build. Mater., 290, 10.1016/j.conbuildmat.2021.123279 Faried, 2021, Mechanical and durability properties of ultra-high performance concrete incorporated with various nano waste materials under different curing conditions, J. Build. Eng., 43 Abdullah, 2019, Influence of palm oil fuel ash on properties of high-strength green concrete, Sci. J. King Faisal Univ. (Basic Appl. Sci.), 20, 10 Mohammed, 2014, Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash, J. Adv. Concr. Technol., 12, 127, 10.3151/jact.12.127 Zeyad, 2016, Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete, Constr. Build. Mater., 125, 1066, 10.1016/j.conbuildmat.2016.08.065 Zeyad, 2017, Pozzolanic reactivity of ultrafine palm oil fuel ash waste on strength and durability performances of high strength concrete, J. Cleaner Prod., 144, 511, 10.1016/j.jclepro.2016.12.121 Thomas, 2006, Chloride diffusion in high-performance lightweight aggregate concrete, Special Publ., 234, 797 Geiker, 2004, Mitigating autogenous shrinkage by internal curing, ACI Special Publ., 143 Zeng, 2012, Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data, Cem. Concr. Compos., 10.1016/j.cemconcomp.2012.06.005 Bentur, 2001, Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates, Cem. Concr. Res., 31, 1587, 10.1016/S0008-8846(01)00608-1 Zhutovsky, 2002, Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage, Mater. Struct., 35, 97, 10.1007/BF02482108 Jensen, 2002, Water-entrained cement-based materials: II. Experimental observations, Cem. Concr. Res., 32, 973, 10.1016/S0008-8846(02)00737-8 Lopez, 2010, High-strength self-curing low-shrinkage concrete for pavement applications, Int. J. Pavement Eng., 11, 333, 10.1080/10298436.2010.488731 Tayeh, 2020, The utilization of recycled aggregate in high performance concrete: a review, J. Mater. Res. Technol., 9, 8469, 10.1016/j.jmrt.2020.05.126 Bashandy, 2017, Recycled aggregate self-curing high-strength concrete, Civ. Eng. J, 3, 427, 10.28991/cej-2017-00000102 A.A. Bashandy, M. Safaan, M.M. ELLyien, Feasibility of using Recycled-Aggregates in Self-Curing Concrete, The 9th Alexandria International Conference on Structural and Geotechnical Engineering (Alexandria 2016), Faculty of Engineering, Alexandria University, Alexandria, Egypt, 2016. Amin, 2020, Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete, J. Cleaner Prod., 273, 10.1016/j.jclepro.2020.123073 Khaliq, 2017, Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures, Constr. Build. Mater., 150, 747, 10.1016/j.conbuildmat.2017.06.039 A.A. Bashandy, Performance of self-curing concrete at elevated temperatures, (2015). Elsanadedy, 2019, Residual compressive strength of high-strength concrete exposed to elevated temperatures, Adv. Mater. Sci. Eng., 2019, 10.1155/2019/6039571 Mindeguia, 2010, Temperature, pore pressure and mass variation of concrete subjected to high temperature—experimental and numerical discussion on spalling risk, Cem. Concr. Res., 40, 477, 10.1016/j.cemconres.2009.10.011 Phan, 2008, Pore pressure and explosive spalling in concrete, Mater. Struct., 41, 1623, 10.1617/s11527-008-9353-2 Real, 2020, Influence of the treatment temperature on the microstructure and hydration behavior of thermoactivated recycled cement, Materials, 13, 3937, 10.3390/ma13183937 He, 2018, Dehydration Characteristics of CSH with Ca/Si Ratio 1.0 Prepared Via Precipitation, J. Wuhan Univ. Technol.-Mater. Sci. Ed., 33, 619, 10.1007/s11595-018-1869-x Yao, 2020, An elastoplastic damage constitutive model of concrete considering the effects of dehydration and pore pressure at high temperatures, Mater. Struct., 53, 19, 10.1617/s11527-020-1450-x ASTM, Standard Specification for Portland Cement ASTM C150 American Society for Testing and Materials, West Conshohocken, 2020, p. 5. ASTM, Standard Specification for Concrete Aggregates ASTM C33 / C33M, ASTM International, West Conshohocken, 2018, p. 8. ASTM, Standard Specification for Chemical Admixtures for Concrete ASTM C494/C494M, 100 Barr Harbor Drive, West Conshohocken, 2019, p. 15. Prasad, 2019, Effect of LECA on mechanical properties of self-curing concrete, Mater. Today:. Proc., 19, 484 Kamal, 2018, Experimental investigation on the behavior of normal strength and high strength self-curing self-compacting concrete, J. Build. Eng., 16, 79, 10.1016/j.jobe.2017.12.012 Mousa, 2015, Mechanical properties of self-curing concrete (SCUC), HBRC J., 11, 311, 10.1016/j.hbrcj.2014.06.004 ASTM, Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM C 143/C 143M 100 Barr Harbor, West Conshohocken, 2015, p. 3. BSI, Testing hardened concrete. Compressive strength of test specimens, BS EN 12390-3, British Standards Institution, London,UK, 2019, p. 24. ASTM, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496 / C496M, ASTM International, West Conshohocken, USA, 2017, p. 5. C. ASTM, Standard test method for flexural strength of concrete (using simple beam with third-point loading), ASTM C78 / C78M, ASTM International, West Conshohocken, PA, 2018, p. 5. T. RILEM, CPC 18 Measurement of hardened concrete carbonation depth, 1988, RILEM Recommendations for the Testing and Use of Constructions Materials. e (1994) 56-58. ASTM, Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM C1202, ASTM International, West Consonance, PA, 2019, p. 8. ASTM, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ATM C.P.A. / BC ATM International, West Conshohocken, PA, 2017, p. 8. Joseph, 2016, Studies on properties of self-curing concrete using polyethylene glycol, Int. Conf. Emerg. Trends Eng. Manage., 12 E. Knapen, D.J.C. Van Gemert, c. Research, Cement hydration and microstructure formation in the presence of water-soluble polymers, 39(1) (2009) 6-13. Suzuki, 2009, Use of porous ceramic waste aggregates for internal curing of high-performance concrete, Cem. Concr. Res., 39, 373, 10.1016/j.cemconres.2009.01.007 S. Zhang, L.J.A.i.M.S. Zong, Engineering, Evaluation of relationship between water absorption and durability of concrete materials, 2014 (2014). Bui, 2015, Effects of porous ceramic waste aggregate as an internal curing agent on steam-cured high strength fly ash concrete, 66 M. Nematollahzade, A. Tajadini, I. Afshoon, F.J.C. Aslani, B. Materials, Influence of different curing conditions and water to cement ratio on properties of self-compacting concretes, 237 (2020) 117570. Yamamoto, 2007, Experimental explanation of compacting effect on hydration phases and strength development mechanism derived from pozzolanic reaction of fly ash, J. JSCE, 63, 52 Mousa, 2015, Physical properties of self-curing concrete (SCUC), HBRC J., 11, 167, 10.1016/j.hbrcj.2014.05.001 Castro, 2011, Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures, Cem. Concr. Compos., 33, 1001, 10.1016/j.cemconcomp.2011.07.006 Mousa, 2015, Self-curing concrete types; water retention and durability, Alexandria Eng. J., 54, 565, 10.1016/j.aej.2015.03.027 Lopez, 2006, Pre-wetted lightweight coarse aggregate reduces long-term deformations of high-performance lightweight concrete, Special Publ., 234, 661 Assmann, 2014, Tensile creep and shrinkage of SAP modified concrete, Cem. Concr. Res., 58, 179, 10.1016/j.cemconres.2014.01.014 Kong, 2015, Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete, Mater. Struct., 48, 2741, 10.1617/s11527-014-0351-2 Mönnig, 2006, Results of a comparative study of the shrinkage behaviour of concrete and mortar mixtures with different internal water sources, 67 Dong, 2009, Influence of lightweight aggregate on shrinkage reducing efficiency of concrete, J. Chinese Ceramic Soc., 3 J. Liu, C. Shi, X. Ma, K.H. Khayat, J. Zhang, D.J.C. Wang, B. Materials, An overview on the effect of internal curing on shrinkage of high performance cement-based materials, 146 (2017) 702-712. N. Yadav, S. Deo, G.J.I.J.o.C.E. Ramtekkar, Technology, Mechanism and Benefits of Internal Curing of Concrete Using Light Weight Aggregates and its Future Prospects in Indian Construction Industry, 8(5) (2017) 323-334. Laneyrie, 2016, Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures, Constr. Build. Mater., 111, 368, 10.1016/j.conbuildmat.2016.02.056 Salahuddin, 2019, Effects of elevated temperature on performance of recycled coarse aggregate concrete, Constr. Build. Mater., 202, 415, 10.1016/j.conbuildmat.2019.01.011 Baradaran-Nasiri, 2017, The effect of elevated temperatures on the mechanical properties of concrete with fine recycled refractory brick aggregate and aluminate cement, Constr. Build. Mater., 147, 865, 10.1016/j.conbuildmat.2017.04.138 O. Arioz, Effects of elevated temperatures on properties of concrete, Fire safety journal 42(8) (2007) 516-522. J. Tao, Y. Yuan, L.J.J.o.m.i.c.e. Taerwe, Compressive strength of self-compacting concrete during high-temperature exposure, 22(10) (2010) 1005-1011. G.-F. Peng, W.-W. Yang, J. Zhao, Y.-F. Liu, S.-H. Bian, L.-H.J.C. Zhao, C. Research, Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures, 36(4) (2006) 723-727. Y.-S. Tai, H.-H. Pan, Y.-N.J.N.E. Kung, Design, Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800 C, 241(7) (2011) 2416-2424. Zhang, 2011, Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures, Fire Saf. J., 46, 543, 10.1016/j.firesaf.2011.07.010 Guo, 2014, Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures, J. Cleaner Prod., 72, 193, 10.1016/j.jclepro.2014.02.036 Al-Attar, 2020, Investigating the behaviour of hybrid fibre-reinforced reactive powder concrete beams after exposure to elevated temperatures, J. Mater. Res. Technol., 9, 1966, 10.1016/j.jmrt.2019.12.029 Annerel, 2009, Revealing the temperature history in concrete after fire exposure by microscopic analysis, Cem. Concr. Res., 39, 1239, 10.1016/j.cemconres.2009.08.017 H. Akbarzadeh Bengar, A.A. Shahmansouri, N. Akkas Zangebari Sabet, K. Kabirifar, V. W.Y. Tam, Impact of elevated temperatures on the structural performance of recycled rubber concrete: Experimental and mathematical modeling, Construction and Building Materials 255 (2020) 119374. Abdul-Rahman, 2020, Microstructure and structural analysis of polypropylene fibre reinforced reactive powder concrete beams exposed to elevated temperature, J. Build. Eng., 29 Q. Ma, R. Guo, Z. Zhao, Z. Lin, K.J.C. He, B. Materials, Mechanical properties of concrete at high temperature—A review, 93 (2015) 371-383.