Additive manufacturing of geopolymer for sustainable built environment

Ahari, 2015, Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials, Cem. Concr. Compos., 59, 26, 10.1016/j.cemconcomp.2015.03.009 ASTM C618-15, 2015 Banfill, 1991, The rheology of fresh mortar, Mag. Concr. Res., 43, 13, 10.1680/macr.1991.43.154.13 Bos, 2016, Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing, Virtual Phys. Prototyp., 11, 209, 10.1080/17452759.2016.1209867 Bos, 2018, 3D printing concrete with reinforcement Choi, 2016, Viscoelastic properties of fresh cement paste to study the flow behavior, Int. J. Concr. Struct. Mater., 10, 65, 10.1007/s40069-016-0158-3 Chua, 2014 Davidovits, 1991, Geopolymers: inorganic polymeric new materials, J. Therm. Analysis Calorim., 37, 1633, 10.1007/BF01912193 Demie, 2013, Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete, Constr. Build. Mater., 41, 91, 10.1016/j.conbuildmat.2012.11.067 Feng, 2015, Mechanical properties of structures 3D printed with cementitious powders, Constr. Build. Mater., 93, 486, 10.1016/j.conbuildmat.2015.05.132 Franchin, 2017, Direct ink writing of geopolymeric inks, J. Eur. Ceram. Soc., 37, 2481, 10.1016/j.jeurceramsoc.2017.01.030 Gibson, 2009 Gosselin, 2016, Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders, Mater. Des., 100, 102, 10.1016/j.matdes.2016.03.097 Habert, 2011, An environmental evaluation of geopolymer based concrete production: reviewing current research trends, J. Clean. Prod., 19, 1229, 10.1016/j.jclepro.2011.03.012 Hambach, 2017, Properties of 3D-printed fiber-reinforced Portland cement paste, Cem. Concr. Compos., 79, 62, 10.1016/j.cemconcomp.2017.02.001 Kazemian, 2017, Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture, Constr. Build. Mater., 145, 639, 10.1016/j.conbuildmat.2017.04.015 Khan, 2016, Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash, Constr. Build. Mater., 125, 809, 10.1016/j.conbuildmat.2016.08.097 Khoshnevis, 2004, Automated construction by contour crafting - related robotics and information technologies, Automation Constr., 13, 5, 10.1016/j.autcon.2003.08.012 Khoshnevis, 2006, Mega-scale fabrication by contour crafting, Int. J. Industrial Syst. Eng., 1, 301, 10.1504/IJISE.2006.009791 Kittusamy, 2004, Whole-body vibration and postural stress among operators of construction equipment: a literature review, J. Saf. Res., 35, 255, 10.1016/j.jsr.2004.03.014 Kovler, 2011, Properties of fresh and hardened concrete, Cem. Concr. Res., 41, 775, 10.1016/j.cemconres.2011.03.009 Kreiger, 2015, The current state of 3D printing for use in construction Labonnote, 2016, Additive construction: state-of-the-art, challenges and opportunities, Automation Constr., 72, 347, 10.1016/j.autcon.2016.08.026 Le, 2012, Hardened properties of high-performance printing concrete, Cem. Concr. Res., 42, 558, 10.1016/j.cemconres.2011.12.003 Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct., 45, 1221, 10.1617/s11527-012-9828-z Lim, 2012, Developments in construction-scale additive manufacturing processes, Automation Constr., 21, 262, 10.1016/j.autcon.2011.06.010 Nazari, 2015, Synthesis of geopolymer from industrial wastes, J. Clean. Prod., 99, 297, 10.1016/j.jclepro.2015.03.003 Panda, 2017, Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material, Mater. Lett., 10.1016/j.matlet.2017.07.123 Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct., 49, 1213, 10.1617/s11527-015-0571-0 Provis, 2007, Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry, Chem. Eng. Sci., 62, 2309, 10.1016/j.ces.2007.01.027 Rushing, 2017, Investigation of concrete mixtures for additive construction, Rapid Prototyp. J., 23, 74, 10.1108/RPJ-09-2015-0124 Salet, 2018, 3D concrete printing – a structural engineering perspective D Shape: www.d-shape.com. (accessed on 5th July 2017). Tay, 2016, Processing and properties of construction materials for 3D printing, vol. 861, 177 Tay, 2017, 3D printing trends in building and construction industry: a review, Virtual Phys. Prototyp., 1 Tibaut, 2016, Interoperability requirements for automated manufacturing systems in construction, J. Intell. Manuf., 27, 251, 10.1007/s10845-013-0862-7 Wallevik, 2009, Rheological properties of cement paste: thixotropic behavior and structural breakdown, Cem. Concr. Res., 39, 14, 10.1016/j.cemconres.2008.10.001 2016 Wu, 2016, A critical review of the use of 3-D printing in the construction industry, Automation Constr., 68, 21, 10.1016/j.autcon.2016.04.005 Xia, 2016, Method of formulating geopolymer for 3D printing for construction applications, Mater. Des., 110, 382, 10.1016/j.matdes.2016.07.136