Promothes Saha1, Khaled Ksaibati1, Rebecca Atadero2
1Department of Civil and Architectural Engineering, University of Wyoming, Dept. 3295, 1000 E. University Ave, Laramie, WY 82071, USA
2Department of Civil and Environmental Engineering, Colorado State University, Fort Collins, CO 80523-1372, USA
Tóm tắt
In the state of Colorado, the Colorado Department of Transportation (CDOT) utilizes their pavement management system (PMS) to manage approximately 9,100 miles of interstate, highways, and low-volume roads. Three types of deterioration models are currently being used in the existing PMS: site-specific, family, and expert opinion curves. These curves are developed using deterministic techniques. In the deterministic technique, the uncertainties of pavement deterioration related to traffic and weather are not considered. Probabilistic models that take into account the uncertainties result in more accurate curves. In this study, probabilistic models using the discrete-time Markov process were developed for five distress indices: transverse, longitudinal, fatigue, rut, and ride indices, as a case study on low-volume roads. Regression techniques were used to develop the deterioration paths using the predicted distribution of indices estimated from the Markov process. Results indicated that longitudinal, fatigue, and rut indices had very slow deterioration over time, whereas transverse and ride indices showed faster deterioration. The developed deterioration models had the coefficient of determination (R2) above 0.84. As probabilistic models provide more accurate results, it is recommended that these models be used as the family curves in the CDOT PMS for low-volume roads.
