Development of adaptive injection flow rate and pressure control algorithms for resin transfer molding

Seemann WH. Plastic transfer molding techniques for the production of fiber reinforced plastic structures. US Patent 4,902,215. February 20, 1990. Restrepo O, Rodríguez A, Hsiao K-T, Minaie B. Adaptive flow control of RTM using spinal sensors. In: Proceedings of the 50th SAMPE symposium and exhibition, Long Beach, CA, May 2005. Li W. Process analysis and adaptive control of resin transfer molding. PhD dissertation, University of Alabama at Birmingham, Birmingham, Alabama, 2001. Mazumdar, 2002 Walsh, 1999, Sensor-based control of flow fronts in vacuum-assisted RTM, Plast Eng, 55, 29 Parnas, 2005, Vacuum-assisted resin transfer molding model, Polym Compos, 26, 477, 10.1002/pc.20121 Gokce, 2003, Combinatorial search to optimize vent locations in the presence of disturbances in liquid composite molding processes, Mater Manufactur Process, 18, 261, 10.1081/AMP-120018909 Hang, 1993 Hsiao, 2004, Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding—Part I: design and algorithm development, Compos Part A: Appl Sci Manufactur, 35, 1149, 10.1016/j.compositesa.2004.03.010 Devillard, 2005, Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding—Part II: automation and validation, Compos Part A: Appl Sci Manufactur, 36, 1581, 10.1016/j.compositesa.2004.04.009 Panitapu R. Analysis of filling pattern in resin transfer molding. Masters Thesis, Mobile, University of South Alabama, Alabama, 2003. Shojaei, 2006, Numerical simulation of three-dimensional flow and analysis of filling process in compression resin transfer moulding, Compos Part A: Appl Sci Manufactur, 37, 1434, 10.1016/j.compositesa.2005.06.021 Lawrence, 2002, An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding, Compos Part A: Appl Sci Manufactur, 33, 981, 10.1016/S1359-835X(02)00043-X Lawrence, 2006, Experimental validation of dependence map based control in liquid composite molding, J Compos Mater, 40, 1137, 10.1177/0021998305057378 Skordos, 2000, A dielectric sensor for measuring flow in resin transfer moulding, Measure Sci Technol, 11, 25, 10.1088/0957-0233/11/1/304 Kim, 2002, Dielectric cure monitoring for glass/polymer prepreg composites, Compos Struct, 57, 91, 10.1016/S0263-8223(02)00072-7 Hegg MC. Monitoring of resin transfer molding processes with distributed dielectric sensors. Masters thesis, University of Washington, Seattle, Washington, 2004. Stöven, 2003, Continuous monitoring of three-dimensional resin flow through a fiber Preform, Compos Part A: Appl Sci Manufactur, 34, 475, 10.1016/S1359-835X(03)00059-9 Minaie B, Li W, Jiang S, Hsiao K-T, Little R. Adaptive control of non-isothermal filling in resin transfer molding. In: Proceedings of the 49th SAMPE symposium and exhibition, Long Beach, CA, May 2004. Minaie, 2005, Adaptive control of filling pattern in resin transfer molding process, J Compos Mater, 39, 1497, 10.1177/0021998305051082 Niesel, 2002, Closed-loop control in resin transfer molding using real-time numerical process simulations, Compos Sci Technol, 62, 283, 10.1016/S0266-3538(01)00213-5 Johnson R, Pitchumani R. Simulated active flow control in a VARTM process using localized induction heating. In: ICCM-14 proceedings, San Diego, CA, July 14–18, 2003. National Instruments, National Instruments™ LabVIEW™ Getting Started With LabVIEW, Part Number 321527E-01, November 2001.