Numerical study of the premixed propane/air flame characteristics in a partially filled micro porous combustor

Waitz, 1998, Combustors for micro-gas turbine engines, J Fluid Eng, 120, 109, 10.1115/1.2819633 Wang, 2016, Miniaturization limitations of rotary internal combustion engines, Energy Convers Manag, 112, 101, 10.1016/j.enconman.2016.01.002 Aichlmayr, 2001, Miniature freepiston homogenous charge compression ignition engine compressor concept-part I: performance estimation and design considerations unique to small dimensions, Chem Eng Sci, 57, 4161, 10.1016/S0009-2509(02)00256-7 Federici, 2006, Catalytic microcombustions with integrated thermoelectric elements for portable power production, J Power Sources, 161, 1469, 10.1016/j.jpowsour.2006.06.042 Yang, 2003, Microscale combustion research for application to micro thermophotoltaic systems, Energy Convers Manag, 44, 2625, 10.1016/S0196-8904(03)00024-4 Gauthier, 2014, Burning rates and temperatures of flames in excess-enthalpy burners: a numerical study of? ame propagation in small heat-recirculating tubes, Combust Flame, 161, 2348, 10.1016/j.combustflame.2014.02.011 Gauthier, 2016, Effects of external heat loss on the propagation and quenching of flames in small heat-recircalation tubes, Combust Flame, 173, 27, 10.1016/j.combustflame.2016.07.030 Norton, 2003, Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures, Chem Eng Sci, 58, 4871, 10.1016/j.ces.2002.12.005 Norton, 2004, A CFD study of propane/air microflame stability, Combust Flame, 138, 97, 10.1016/j.combustflame.2004.04.004 Vijayan, 2010, Combustion and heat transfer at meso-scale with thermal recuperation, Appl Energy, 87, 2628, 10.1016/j.apenergy.2010.03.011 Min, 2010, Scale and material effects on flame characteristics in small heat recirculation combustors of a counter-current channel type, Appl Therm Eng, 30, 2227, 10.1016/j.applthermaleng.2010.06.003 Zuo, 2017, Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for microthermophotovoltaic system, Energy, 122, 408, 10.1016/j.energy.2017.01.079 Vijayan, 2011, Thermal performance of a meso-scale liquid-fuel combustor, Appl Energy, 88, 2335, 10.1016/j.apenergy.2011.01.012 Kim, 2007, Development and scale effects of small Swiss-roll combustors, Proc Combust Inst, 31, 3243, 10.1016/j.proci.2006.08.077 Yang, 2012, An advanced micro modular combustor-radiator with heat recuperation for micro-TPV system application, Appl Energy, 97, 749, 10.1016/j.apenergy.2011.12.024 Baigmohammadi, 2013, Numerical study of the effects of wire insertion on CH4(methane)/AIR pre-mixed flame in a micro combustor, Energy, 54, 271, 10.1016/j.energy.2013.01.047 Yang, 2015, Combustion process and entropy generation in a novel microcombustor with a block insert, Chem Eng J, 274, 231, 10.1016/j.cej.2015.04.034 Yang, 2002, Combustion in micro-cylindrical combustors with and without a backward facing step, Appl Therm Eng, 22, 1777, 10.1016/S1359-4311(02)00113-8 Wan, 2015, Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities, Energy Convers Manag, 96, 605, 10.1016/j.enconman.2015.03.030 Fan, 2017, Numerical investigation on flame blow-off limit of a novel microscale Swiss-roll combustor with a bluff-body, Energy, 123, 252, 10.1016/j.energy.2017.02.003 Tang, 2017, Combustion characteristics of premixed propane/hydrogen/air in the micro-planar combustor with different channel-heights, Appl Energy, 203, 635, 10.1016/j.apenergy.2017.05.187 Yang, 2011, Research on modular micro combustor-radiator with and without porous medium, Chem Eng J, 168, 799, 10.1016/j.cej.2010.12.083 Pan, 2015, Hydrogen/oxygen premixed combustion characteristics in micro porous medium combustor, Appl Energy, 160, 802, 10.1016/j.apenergy.2014.12.049 Li, 2015, Dynamic behaviors of premixed hydrogen-air flames in a planar micro-combustor filled with porous medium, Fuel, 145, 70, 10.1016/j.fuel.2014.12.070 Li, 2016, Experimental study on standing wave regimes of premixed H2-air combustion in planar micro-combustors partially filled with porous medium, Fuel, 167, 98, 10.1016/j.fuel.2015.11.033 Li, 2016, Numerical study on heat recirculation in a porous micro-combustor, Combust Flame, 171, 152, 10.1016/j.combustflame.2016.06.007 Liu, 2015, Numerical investigation of filtration gas combustion in a mesoscale combustor filled with inert fibrous porous medium, Int J Heat Mass Tran, 91, 18, 10.1016/j.ijheatmasstransfer.2015.07.100 Ning, 2017, Experimental investigation on non-premixed methane/air combustion in Y-shaped meso-scale combustors with/without fibrous porous medium, Energy Convers Manag, 138, 22, 10.1016/j.enconman.2017.01.065 Donoso-Garcĺła, 2015, Numerical study of turbulent porous medium combustion coupled with thermoelectric generation in a recuperative reactor, Energy, 93, 1189, 10.1016/j.energy.2015.09.123 Wang, 2014, Numerical and experimental studies of mixing enhancement and flame stabilization in a MesoScale TPV combustor with a porous-medium injector and a heat-regeneration reverse tube, Heat Tran Eng, 35, 336, 10.1080/01457632.2013.810968 Marbach, 2007, Investigation of a miniature combustor using porous medium surface stabilized flame, Combust Sci Technol, 179, 1901, 10.1080/00102200701385034 Mikami, 2013, Combustion of gaseous and liquid fuels in meso-scale tubes with wire mesh, Proc Combust Inst, 34, 3387, 10.1016/j.proci.2012.05.064 Macdonald, 1979, Flow through porous medium Ergun equation revisited, Ind Eng Chem Fund, 18, 199, 10.1021/i160071a001 ANSYS, ANSYS FLUENT Release 15.0. Canonsburg, PA153172011. Chua, 2012, Fundamental experiment and numerical analysis of a modular microcombustor with silicon carbide porous medium, Ind Eng Chem Res, 51, 6327, 10.1021/ie203017g Barra, 2004, Heat recirculation and heat transfer in porous burners, Combust Flame, 137, 230, 10.1016/j.combustflame.2004.02.007 Yang, 2009, Filtration combustion of methane in high-porosity micro-fibrous medium, Combust Sci Technol, 181, 654, 10.1080/00102200802646748 Combustion Research Group, University of California at San Diego (http://combustion.ucsd.edu). Chemical-Kinetic Mechanisms for Combustion Applications, http://web.eng.ucsd.edu/mae/groups/combustion/sdmech/sand-iego20030430/sandiego20030430.mech/; 2018 [accessed 10 April 2018]. Wan, 2015, Effect of solid material on the blow-off limit of CH4/air flames in a micro combustor with a plate flame holder and preheating channels, Energy Convers Manag, 101, 552, 10.1016/j.enconman.2015.06.010 Kang, 2015, Experimental investigation of flame stability limits of a mesoscale combustor with thermally orthotropic walls, Appl Therm Eng, 85, 234, 10.1016/j.applthermaleng.2015.04.017 Kee, 1985 Barra, 2004, Heat recirculation and heat transfer in porous burners, Combust Flame, 137, 230, 10.1016/j.combustflame.2004.02.007 Sabia, 2015, CO2 and H2O effect on propane auto-ignition delay times under mild combustion operative conditions, Combust Flame, 162, 533, 10.1016/j.combustflame.2014.08.009