Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

Sharma, 2014, Tribological and mechanical behavior of particulate aluminum matrix composites, J Reinf Plast Compos, 33, 2192, 10.1177/0731684414556012

Surappa, 2003, Aluminium matrix composites: challenges and opportunities, Sadhana, 28, 319, 10.1007/BF02717141

Abdizadeh, 2008, Comparing the effect of processing temperature on microstructure and mechanical behavior of (ZrSiO 4 or TiB 2)/aluminum composites, Mater Sci Eng, A, 498, 53, 10.1016/j.msea.2008.07.009

Karbalaei Akbari, 2015, Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites, Mater Des, 66, 150, 10.1016/j.matdes.2014.10.048

Karbalaei, 2015, Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: a comparative study focusing on particle capture in matrix, J Compos Mater, 49, 3665, 10.1177/0021998314568327

Shirvanimoghaddam, 2015, Investigation of discontinuously reinforced aluminium metal matrix composite fabricated by two different micron ceramic reinforcements (ZrSiO 4, B 4 C): comparative study, Kovove Materialy, 53, 139, 10.4149/km_2015_3_139

Shirvanimoghaddam, 2016, Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: experimental investigation and predictive modelling, Ceram Int, 42, 6206, 10.1016/j.ceramint.2015.12.181

Shirvanimoghaddam, 2016, Boron carbide reinforced aluminium matrix composite: physical, mechanical characterization and mathematical modelling, Mater Sci Eng, A, 658, 135, 10.1016/j.msea.2016.01.114

Abdizadeh, 2011, Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method, Materials & Design, 32, 4417, 10.1016/j.matdes.2011.03.071

Ashuri, 2016, Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter, Nanoscale, 8, 74, 10.1039/C5NR05116A

Ramakrishna, 2001, Biomedical applications of polymer-composite materials: a review, Compos Sci Technol, 61, 1189, 10.1016/S0266-3538(00)00241-4

Drechsler, 2009, Carbon fiber reinforced composites, Ullmann’s Encyclopedia Ind Chem, 10.1002/14356007.m05_m02

Kelly, 2006, Composite materials after seventy years, J Mater Sci, 41, 905, 10.1007/s10853-006-6569-9

Ramesh, 2013, Tribological characteristics of innovative Al6061-carbon fiber rod metal matrix composites, Mater Des, 50, 597, 10.1016/j.matdes.2013.03.031

Zweben, 1998, Advances in composite materials for thermal management in electronic packaging, JOM, 50, 47, 10.1007/s11837-998-0128-6

Luedtke, 2004, Thermal management materials for high-performance applications, Adv Eng Mater, 6, 142, 10.1002/adem.200300552

Prieto, 2008, Fabrication and properties of graphite flakes/metal composites for thermal management applications, Scr Mater, 59, 11, 10.1016/j.scriptamat.2008.02.026

Molina, 2008, Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution, Mater Sci Eng, A, 480, 483, 10.1016/j.msea.2007.07.026

Qu, 2011, Review of metal matrix composites with high thermal conductivity for thermal management applications, Prog Nat Sci: Mater Int, 21, 189, 10.1016/S1002-0071(12)60029-X

Liu, 2008, Pressureless infiltration of liquid aluminum alloy into SiC preforms to form near-net-shape SiC/Al composites, J Alloys Compd, 465, 239, 10.1016/j.jallcom.2007.10.055

Schubert, 2008, Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications, Scr Mater, 58, 263, 10.1016/j.scriptamat.2007.10.011

Weber, 2007, On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X = Cr, B) diamond composites, Scr Mater, 57, 988, 10.1016/j.scriptamat.2007.08.007

Chu, 2010, Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles, J Alloys Compd, 490, 453, 10.1016/j.jallcom.2009.10.040

Lalet, 2014, Thermal expansion coefficient and thermal fatigue of discontinuous carbon fiber-reinforced copper and aluminum matrix composites without interfacial chemical bond, J Mater Sci, 49, 397, 10.1007/s10853-013-7717-7

Cho, 2008, Heat dissipation effect of Al plate embedded substrate in network system, Microelectron Reliab, 48, 1696, 10.1016/j.microrel.2008.04.018

Mathias, 2009, Architectural optimization for microelectronic packaging, Appl Therm Eng, 29, 2391, 10.1016/j.applthermaleng.2008.12.037

Silvain, 2009, Novel processing and characterization of Cu/CNF nanocomposite for high thermal conductivity applications, Compos Sci Technol, 69, 2474, 10.1016/j.compscitech.2009.06.023

Lee, 2014, Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process, Compos Sci Technol, 97, 1, 10.1016/j.compscitech.2014.03.022

Veillère, 2012, Influence of the interface structure on the thermo-mechanical properties of Cu–X (X=Cr or B)/carbon fiber composites, Mater Res Bull, 47, 375, 10.1016/j.materresbull.2011.11.004

Jun, 2009, Wear performance of the lead free tin bronze matrix composite reinforced by short carbon fibers, Appl Surf Sci, 255, 6647, 10.1016/j.apsusc.2009.02.063

Liu, 2008, Fabrication and properties of short carbon fibers reinforced copper matrix composites, J Mater Sci, 43, 974, 10.1007/s10853-007-2089-5

Park, 2000, Effect of anti-oxidative filler on the interfacial mechanical properties of carbon–carbon composites measured at high temperature, Carbon, 38, 1053, 10.1016/S0008-6223(99)00210-9

Chand, 2000, Review Carbon fibers for composites, J Mater Sci, 35, 1303, 10.1023/A:1004780301489

Xia, 2009, Wear and mechanical properties of carbon fiber reinforced copper alloy composites, Mater Charact, 60, 363, 10.1016/j.matchar.2008.10.008

Zhu, 1997, Fabrication and properties of carbon fibre-reinforced copper composite by controlled three-step electrodeposition, J Mater Sci, 32, 1061, 10.1023/A:1018542809294

Edie, 1998, The effect of processing on the structure and properties of carbon fibers, Carbon, 36, 345, 10.1016/S0008-6223(97)00185-1

Rodríguez-Guerrero, 2006, Pressure infiltration of Al-12 wt.% Si-X (X = Cu, Ti, Mg) alloys into graphite particle preforms, Acta Mater, 54, 1821, 10.1016/j.actamat.2005.11.041

Naji, 2008, The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites, Mater Sci Eng, A, 486, 413, 10.1016/j.msea.2007.09.030

Ramesh, 2009, Friction and wear behavior of graphite-carbon short fiber reinforced Al–17%Si alloy hybrid composites, J Tribol, 131, 014501, 10.1115/1.2991124

Liu, 2009, Friction and wear properties of short carbon fiber reinforced aluminum matrix composites, Wear, 266, 733, 10.1016/j.wear.2008.08.009

Miracle, 2005, Metal matrix composites - from science to technological significance, Compos Sci Technol, 65, 2526, 10.1016/j.compscitech.2005.05.027

Hufenbach, 2006, Fabrication technology and material characterization of carbon fibre reinforced magnesium, J Mater Process Technol, 175, 218, 10.1016/j.jmatprotec.2005.04.023

Wu, 1997, Morphology of second-phase precipitates in carbon-fiber- and graphite-fiber-reinforced magnesium-based metal-matrix composites, Compos Sci Technol, 57, 661, 10.1016/S0266-3538(97)00020-1

Ghasali, 2015, Investigation on microstructural and mechanical properties of B4C–aluminum matrix composites prepared by microwave sintering, J Mater Res Technol, 4, 411, 10.1016/j.jmrt.2015.02.005

Ghasali, 2016, Mechanical properties and microstructure characterization of spark plasma and conventional sintering of Al–SiC–TiC composites, J Alloys Compd, 666, 366, 10.1016/j.jallcom.2016.01.118

Ghasali, 2015, Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering, Mater Sci Eng, A, 627, 27, 10.1016/j.msea.2014.12.096

Pakseresht, 2015, Role of different fractions of nano-size SiC and milling time on the microstructure and mechanical properties of Al–SiC nanocomposites, Trans Indian Inst Met, 1

Ghasali, 2016, Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering, J Alloys Compd, 688, 527, 10.1016/j.jallcom.2016.07.063

Tang, 2009, Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings, Appl Surf Sci, 255, 4393, 10.1016/j.apsusc.2008.10.124

Ureña, 2007, Effect of copper electroless coatings on the interaction between a molten Al-Si-Mg alloy and coated short carbon fibres, Compos A Appl Sci Manuf, 38, 1947, 10.1016/j.compositesa.2007.02.005

Hajjari, 2011, Effect of applied pressure and nickel coating on microstructural development in continuous carbon fiber-reinforced aluminum composites fabricated by squeeze casting, Mater Manuf Process, 26, 599, 10.1080/10426910903447311

Hajjari, 2004, The study of electroless coating of nickel on carbon fibers, Iran J Mater Sci Eng, 1, 43

Bhav Singh, 2009, Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites, J Mater Process Technol, 209, 2104, 10.1016/j.jmatprotec.2008.05.002

Tjong, 2013, Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets, Mater Sci Eng R: Rep, 74, 281, 10.1016/j.mser.2013.08.001

Zhang, 2009, Carbon nanotube in different shapes, Mater Today, 12, 12, 10.1016/S1369-7021(09)70176-2

Qi, 2010, Large-scale synthesis of carbon nanomaterials by catalytic chemical vapor deposition: a review of the effects of synthesis parameters and magnetic properties, Materials, 3, 4142, 10.3390/ma3084142

Kathyayini, 2004, Catalytic activity of Fe, Co and Fe/Co supported on Ca and Mg oxides, hydroxides and carbonates in the synthesis of carbon nanotubes, J Mol Catal A: Chem, 223, 129, 10.1016/j.molcata.2004.02.029

Ting, 2009, Unprecedented re-growth of carbon nanotubes on in situ re-activated catalyst, Nanotechnology, 20, 025608, 10.1088/0957-4484/20/2/025608

Geim, 2007, The rise of graphene, Nat Mater, 6, 183, 10.1038/nmat1849

Tsakadze, 2007, Plasma-assisted self-organized growth of uniform carbon nanocone arrays, Carbon, 45, 2022, 10.1016/j.carbon.2007.05.030

Fejes, 2010, A review of the properties and CVD synthesis of coiled carbon nanotubes, Materials, 3, 2618, 10.3390/ma3042618

Bianco, 2005, Applications of carbon nanotubes in drug delivery, Curr Opin Chem Biol, 9, 674, 10.1016/j.cbpa.2005.10.005

morgan, 2005

Wang, 2012, Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers, Compos Sci Technol, 72, 152, 10.1016/j.compscitech.2011.10.008

Khayyam, 2015, Dynamic prediction models and optimization of polyacrylonitrile (PAN) stabilization processes for production of carbon fiber, IEEE Trans Ind Inf, 11, 887, 10.1109/TII.2015.2434329

Lee, 2014, Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process, Compos Sci Technol, 97, 1, 10.1016/j.compscitech.2014.03.022

Fitzer, 1989, PAN-based carbon fibers–present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters, Carbon, 27, 621, 10.1016/0008-6223(89)90197-8

Minus, 2005, The processing, properties, and structure of carbon fibers, JOM, 57, 52, 10.1007/s11837-005-0217-8

Kozey, 1995, Compressive behavior of materials: Part II. High performance fibers, J Mater Res, 10, 1044, 10.1557/JMR.1995.1044

Khayyam, 2015, Stochastic optimization models for energy management in carbonization process of carbon fiber production, Appl Energy, 158, 643, 10.1016/j.apenergy.2015.08.008

Frank, 2014, Carbon fibers: precursor systems, processing, structure, and properties, Angew Chem - Int Ed, 53, 5262, 10.1002/anie.201306129

Liu, 2012, Recent progress in fabrication, structure, and properties of carbon fibers, Polym Rev, 52, 234, 10.1080/15583724.2012.705410

Vidal-Sétif, 1999, On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites, Mater Sci Eng, A, 272, 321, 10.1016/S0921-5093(99)00487-6

Etter, 2003, Physical properties of graphite/aluminium composites produced by gas pressure infiltration method, Carbon, 41, 1017, 10.1016/S0008-6223(02)00448-7

Liu, 2005, Al infiltrated C-C hybrid composites, Mater Des, 26, 83, 10.1016/j.matdes.2004.05.012

Baumli, 2013, Fabrication of carbon fiber reinforced aluminum matrix composites via a titanium-ion containing flux, Compos A Appl Sci Manuf, 44, 47, 10.1016/j.compositesa.2012.08.021

Badii, 2016, Chemical structure based prediction of PAN and oxidized PAN fiber density through a non-linear mathematical model, Polym Degrad Stab, 131, 53, 10.1016/j.polymdegradstab.2016.06.019

Buckley, 1993

Park S-J. Carbon fibers. In: Hull R, editor. Springer series in materials science. vol. 210. Springer; 2014.

Buckley, 1993

Oroumei, 2015, Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin, ACS Sustain Chem Eng, 3, 758, 10.1021/acssuschemeng.5b00097

Ismail, 2008, The effect of processing conditions on a polyacrylonitrile fiber produced using a solvent-free free coagulation process, Mater Sci Eng A, 485, 7, 10.1016/j.msea.2007.08.060

Sedghi, 2008, The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties, J Mater Process Technol, 198, 8, 10.1016/j.jmatprotec.2007.06.052

Pamula, 2003, Bulk and surface chemical functionalities of type III PAN-based carbon fibres, Carbon, 41, 11, 10.1016/S0008-6223(03)00177-5

Rahman, 2007, The effect of residence time on the physical characteristics of PAN-based fibers produced using a solvent-free coagulation process, Mater Sci Eng A, 448, 6, 10.1016/j.msea.2006.10.042

Gupta, 1997, Solution spinning process, 16

Ashley Morris, 2014, Synthesis, spinning, and properties of very high molecular weight poly(acrylonitrile-co-methyl acrylate) for high performance precursors for carbon fiber, Polymer, 55, 12

Wu, 2012, Interactions between polyacrylonitrile and solvents: density functional theory study and two-dimensional infrared correlation analysis, J Phys Chem, 116, 10, 10.1021/jp304167f

Davidson, 2000, Investigation of molecular orientation in melt-spun high acrylonitrile fibers, Polymer, 41, 8, 10.1016/S0032-3861(99)00536-4

Morris, 2011, Bench-scale, multifilament spinning conditions effect on the structure and properties of polyacrylonitrile precursor fiber

Ju, 2013, Effect of comonomer structure on the stabilization and spinnability of polyacrylonitrile copolymers, Carbon, 54, 13, 10.1016/j.carbon.2012.11.044

Bajaj, 2001, Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers, Polymer, 42, 12, 10.1016/S0032-3861(00)00583-8

Bajaj, 2001, Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers, Polymer, 42, 12, 10.1016/S0032-3861(00)00583-8

Frank, 2012, Carbon fibers: precursors, manufacturing, and properties, Macromol Mater Eng, 297, 9, 10.1002/mame.201100406

Reynolds, 1980, Some factors affecting the strength of carbon fibres, Philos Trans, 294, 11

Fukunaga, 1999, Air-oxidation and anodization of pitch-based carbon fibers, Carbon, 37, 5, 10.1016/S0008-6223(98)00307-8

Bismarck, 1999, Surface properties of PAN-based carbon fibers tuned by anodic oxidation in different alkaline electrolyte systems, Appl Surf Sci, 143, 11, 10.1016/S0169-4332(98)00929-5

Ma, 2011, Plasma treatment of carbon fibers: non-equilibrium dynamic adsorption and its effect on the mechanical properties of RTM fabricated composites, Appl Surf Sci, 257, 7, 10.1016/j.apsusc.2010.12.074

Han, 2014, Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites, Composites B, 60, 8, 10.1016/j.compositesb.2013.12.069

Wang, 2015, Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment, Mater Des, 85, 8, 10.1016/j.matdes.2015.07.104

Zhao, 2010, Improved interfacial properties of carbon fiber/epoxy composites through grafting polyhedral oligomeric silsesquioxane on carbon fiber surface, Mater Lett, 64, 3, 10.1016/j.matlet.2010.08.074

Pittman, 1997, Reactivities of amine functions grafted to carbon fiber surfaces by tetraethylenepentamine. Designing interfacial bonding, Carbon, 35, 15, 10.1016/S0008-6223(97)00047-X

Wu, 1995, Grafting isocyanate-terminated elastomers onto the surfaces of carbon fibers: reaction of isocyanate with acidic surface functions, Carbon, 34, 9

Beggs, 2015, A systematic study of carbon fibre surface grafting via in situ diazonium generation for improved interfacial shear strength in epoxy matrix composites, Compos Sci Technol, 118, 8, 10.1016/j.compscitech.2015.08.001

Eustathopoulos, 1974, The wetting of carbon by aluminium and aluminium alloys, J Mater Sci, 9, 1233, 10.1007/BF00551836

Dorfman, 2001, Atomistic study of interaction zone at copper–carbon interfaces, Mater Sci Eng, C, 15, 191, 10.1016/S0928-4931(01)00308-3

Silvain, 2000, Interface analysis in Al and Al alloys/Ni/carbon composites, J Mater Sci, 35, 961, 10.1023/A:1004714911693

Veillere, 2011, Relationship between interphase chemistry and mechanical properties at the scale of micron in Cu–Cr/CF composite, Acta Mater, 59, 1445, 10.1016/j.actamat.2010.11.006

Lancin, 2000, TEM study of carbon fibre reinforced aluminium matrix composites: influence of brittle phases and interface on mechanical properties, J Eur Ceram Soc, 20, 1493, 10.1016/S0955-2219(00)00021-2

Lim, 2012, Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites, Mater Sci Eng, A, 556, 337, 10.1016/j.msea.2012.06.096

Lee, 1993, Interfacial phenomena in the reactions of AI and Al-Ti melts with KF-AIF3 and NaF-AIF3 melts, Metall Trans B, 24, 955, 10.1007/BF02660987

Landry, 1998, Wettability of carbon by aluminum and aluminum alloys, Mater Sci Eng, A, 254, 99, 10.1016/S0921-5093(98)00759-X

Zhitomirsky, 1998, Electrophoretic and electrolytic deposition of ceramic coatings on carbon fibers, J Eur Ceram Soc, 18, 849, 10.1016/S0955-2219(97)00213-6

Ureña, 2007, Effect of copper electroless coatings on the interaction between a molten Al–Si–Mg alloy and coated short carbon fibres, Compos A Appl Sci Manuf, 38, 1947, 10.1016/j.compositesa.2007.02.005

Zhang, 2015, Effect of Y content on interfacial microstructures and mechanical properties of Cf/Mg composite, Mater Sci Eng, A, 647, 105, 10.1016/j.msea.2015.08.076

Zhang, 2015, Effect of Gd content on interfacial microstructures and mechanical properties of Cf/Mg composite, Mater Des (1980–2015), 65, 567, 10.1016/j.matdes.2014.09.045

Daguang, 2013, Effect of thermal cycling on the mechanical properties of Cf/Al composites, Mater Sci Eng, A, 586, 330, 10.1016/j.msea.2013.07.017

Juhasz, 2012, Materialwiss Werkstofftech, 43, 310, 10.1002/mawe.201200946

Rocher, 1989, Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting, J Mater Sci, 24, 2697, 10.1007/BF02385613

Juhasz, 2013, Wettability of graphite by liquid aluminum under molten potassium halide fluxes, J Mater Sci, 48, 7679, 10.1007/s10853-013-7586-0

Lee, 2000, The effects of temperature and strain rate on the properties of carbon-fiber-reinforced 7075 aluminum alloy metal-matrix composite, Compos Sci Technol, 60, 1975, 10.1016/S0266-3538(00)00083-X

Bushby, 1995, Manufacture and evaluation of carbon fibre reinforced aluminium alloy

Hall, 1995, Surface treatment of carbon fibers for aluminum alloy matrix composites, Scr Metall Mater, 33, 2037, 10.1016/0956-716X(95)00443-Y

Girot, 1987, Discontinuously-reinforced aluminum matrix composites, Compos Sci Technol, 30, 155, 10.1016/0266-3538(87)90007-8

Blankenburgs, 1969, Effect of carbide formation on the mechanical behaviour of carbon-aluminium composites, J Australian Inst Metals, 14, 236

Baker, 1972, The short-term compatibility of carbon fibres with aluminium, Fibre Sci Technol, 5, 213, 10.1016/0015-0568(72)90016-4

Galasso, 1970, Oxidation of carbon and metal coated carbon fibers, Fibre Sci Technol, 2, 303, 10.1016/0015-0568(70)90011-4

Baker, 1972, Oxidation of aluminium-coated carbon fibres and carbon-aluminium composites, Fibre Sci Technol, 5, 285, 10.1016/0015-0568(72)90021-8

Trumper, 1989, 139

Mallick, 2007

Jackson, 1970, Compatibility studies of carbon fibres with nickel and cobalt, J Mater Sci, 5, 9, 10.1007/PL00020251

Barclay, 1971, Carbon fibre/nickel compatibility, J Mater Sci, 6, 1076, 10.1007/BF00980606

Sarian, 1973, Elevated temperature stability of carbon-fibre, nickel-matrix composites: morphological and mechanical property degradation, J Mater Sci, 8, 251, 10.1007/BF00550674

Baker, 1971, Carbon-fibrel metal-matrix composites: fabrication by electrodeposition, Composites, 2, 154, 10.1016/0010-4361(71)90952-9

Leyens, 2003

Even, 2008, Powder route processing of carbon fibres reinforced titanium matrix composites, Compos Sci Technol, 68, 1273, 10.1016/j.compscitech.2007.12.014

Harrigan, 1998, Commercial processing of metal matrix composites, Mater Sci Eng, A, 244, 75, 10.1016/S0921-5093(97)00828-9

Tjong, 2008, Processing-structure-property aspects of particulate-and whisker-reinforced titanium matrix composites, Compos Sci Technol, 68, 583, 10.1016/j.compscitech.2007.07.016

Raghukandan, 2003, An investigation on underwater shock consolidated carbon fiber reinforced Al composites, J Mater Process Technol, 134, 329, 10.1016/S0924-0136(02)01117-2

Yang, 2008, Mechanical properties of short carbon fiber reinforced ZrB 2–SiC ceramic matrix composites, Mater Lett, 62, 2925, 10.1016/j.matlet.2008.01.076

Surappa, 2003, Aluminium matrix composites: challenges and opportunities, Sadhana, 28, 319, 10.1007/BF02717141

Veillère, 2012, Influence of the interface structure on the thermo-mechanical properties of Cu-X (X = Cr or B)/carbon fiber composites, Mater Res Bull, 47, 375, 10.1016/j.materresbull.2011.11.004

Jun, 2009, Wear performance of the lead free tin bronze matrix composite reinforced by short carbon fibers, Appl Surf Sci, 255, 6647, 10.1016/j.apsusc.2009.02.063

Park, 2000, Effect of anti-oxidative filler on the interfacial mechanical properties of carbon-carbon composites measured at high temperature, Carbon, 38, 1053, 10.1016/S0008-6223(99)00210-9

Silvain J-F, Veillère A, Lu Y. Copper-carbon and aluminum-carbon composites fabricated by powder metallurgy processes. Journal of Physics: Conference Series. IOP Publishing; 2014.

Chou, 1985, Fibre-reinforced metal-matrix composites, Composites, 16, 187, 10.1016/0010-4361(85)90603-2

Signorelli, 1986

Moore, 1981, Formability limits of metal-metal composites on rolling in the direction of fiber alignment, Mater Sci Eng, 48, 107, 10.1016/0025-5416(81)90070-7

Watanabe O. The compatibility and mechanical properties of the carbon fibre-metal matrix composite materials. In: Proc Soviet-Japanese Symp Composite Mater; 1979.

Okura, 1980, Mechanical properties of carbon fiber reinforced aluminum composites, Adv Compos Mater, 1075, 10.1016/B978-1-4832-8370-8.50086-3

Lalet, 2014, Thermomechanical stability of a carbon fiber-reinforced aluminum matrix composite fabricated by spark plasma sintering in various pulse conditions, Mater Lett, 130, 32, 10.1016/j.matlet.2014.05.070

Shalu, 2009, Development and characterization of liquid carbon fibre reinforced aluminium matrix composite, J Mater Process Technol, 209, 4809, 10.1016/j.jmatprotec.2008.12.012

McDanels DL. A review of carbon fiber reinforced metal matrix composites - the potential of large-diameter carbon-base monofilaments. In: ASTM national conference on high performance fibers - properties, applications, and test methods. Williamsburg, Virginia; 1970.

Popovska, 1997, Chemical vapor deposition of titanium nitride on carbon fibres as a protective layer in metal matrix composites, Mater Des, 18, 239, 10.1016/S0261-3069(97)00057-5

Arab, 2015, Fabrication of novel fiber reinforced aluminum composites by friction stir processing, Mater Sci Eng, A, 632, 50, 10.1016/j.msea.2015.02.032

Suryanarayana, 2015, Air jet erosion wear behaviour of Al6061-carbon fibre rod composites, Tribology Online, 10, 27, 10.2474/trol.10.27

Chen, 1996, In situ Al-TiB composite obtained by stir casting, J Mater Sci, 31, 311, 10.1007/BF01139145

Lim, 2012, Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites, Mater Sci Eng A, 556, 337, 10.1016/j.msea.2012.06.096

Naji, 2008, The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites, Mater Sci Eng A, 486, 413, 10.1016/j.msea.2007.09.030

Ramesh, 2008, Friction and wear behavior of graphite-carbon short fiber reinforced Al-17%Si alloy hybrid composites, J Tribol, 131, 10.1115/1.2991124

Everett, 2012

Pai, 1994, Semi-solid slurry process for making short carbon fibre dispersed aluminium alloy matrix composites, J Mater Sci Lett, 13, 1278, 10.1007/BF00270960

Towata, 1985, Strength and interfacial reaction of high modulus carbon fiber-reinforced aluminum alloys, Trans Jpn Inst Met, 26, 563, 10.2320/matertrans1960.26.563

Alhashmy, 2015, Laminate squeeze casting of carbon fiber reinforced aluminum matrix composites, Mater Des, 67, 154, 10.1016/j.matdes.2014.11.034

Li, 1990, Microstructure of the interface and interfiber regions in P-55 reinforced aluminum alloys manufactured by pressure infiltration, 131

Kaczmar, 2014, Microstructure and strength of Al2O3 and carbon fiber reinforced 2024 aluminum alloy composites, J Mater Eng Perform, 23, 2801, 10.1007/s11665-014-1036-2

Yang, 1989, Casting particulate and fibrous metal-matrix composites by vacuum infiltration of a liquid metal under an inert gas pressure, J Mater Sci, 24, 3605, 10.1007/BF02385746

Kaptay, 2005, On the asymmetrical dependence of the threshold pressure of infiltration on the wettability of the porous solid by the infiltrating liquid, J Mater Sci, 40, 2531, 10.1007/s10853-005-1987-7

Baker, 1975, Carbon fibre reinforced metals—a review of the current technology, Mater Sci Eng, 17, 177, 10.1016/0025-5416(75)90231-1

Vidal-Sétif, 1999, On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites, Mater Sci Eng A, 272, 321, 10.1016/S0921-5093(99)00487-6

Johnson, 2011, Diamond/Al metal matrix composites formed by the pressureless metal infiltration process, J Mater Res, 8, 1169, 10.1557/JMR.1993.1169

Yoshida M, et al. Studies on ion-plating process for making carbon-fiber reinforced aluminum and properties of the composites. In Proceedings of the 24th national SAMPE symposium; 1979.

Chou, 1985, Fibre-reinforced metal-matrix composites, Composites, 16, 187, 10.1016/0010-4361(85)90603-2

Silber, 2008, Thermal spraying of billets and fiber prepregs for semi-solid forming of metal matrix composites, Surf Coat Technol, 202, 4525, 10.1016/j.surfcoat.2008.04.037

Turbines, 1995, Selected abstracts of thermal spray literature, J Therm Spray Technol, 4, 297, 10.1007/BF02646974

Cornie, 1991, Designing interfaces in inorganic matrix composites, MRS Bull, 16, 32, 10.1557/S0883769400057080

Gupta V, Argon A. Measurement of interface strength by laser pulse induced spallation. In: MRS proceedings. Cambridge Univ Press; 1990.

Kaczmar, 2000, The production and application of metal matrix composite materials, J Mater Process Technol, 106, 58, 10.1016/S0924-0136(00)00639-7

Tjong, 2000, Microstructural and mechanical characteristics of in situ metal matrix composites, Mater Sci Eng R Rep, 29, 49, 10.1016/S0927-796X(00)00024-3

Torralba, 2003, P/M aluminum matrix composites: an overview, J Mater Process Technol, 133, 203, 10.1016/S0924-0136(02)00234-0

Ye, 2004, Review of recent studies in magnesium matrix composites, J Mater Sci, 9, 6153, 10.1023/B:JMSC.0000043583.47148.31

Miracle, 2005, Metal matrix composites – from science to technological significance, Compos Sci Technol, 65, 2526, 10.1016/j.compscitech.2005.05.027

Chawla, 2006, Metal-matrix composites in ground transportation, JOM, 58, 67, 10.1007/s11837-006-0231-5

Ye, 2008, Fabrication of metal matrix composites by metal injection molding-a review, Mater Process Technol, 200, 12, 10.1016/j.jmatprotec.2007.10.066

Mortensen, 2010, Metal matrix composites, Annu Rev Mater Res, 40, 243, 10.1146/annurev-matsci-070909-104511

Bakshi, 2010, Carbon nanotube reinforced metal matrix composites - a review, Int Mater Rev, 55, 41, 10.1179/095066009X12572530170543

Kumar, 2011, Mechanical and tribological behavior of particulate reinforced aluminum metal matrix composites-a review, Miner Mater Charact Eng, 10, 59

Saheb, 2012, Spark plasma sintering of metals and metal matrix nanocomposites: a review, J Nanomater, 2012, 13, 10.1155/2012/983470

Silvestre, 2013, State-of-the-art review on carbon nanotube reinforced metal matrix composites, Int J Compos Mater, 3, 28

Das, 2014, Properties of ceramic-reinforced aluminium matrix composites - a review, Int J Mech Mater Eng, 9, 1

Kala, 2014, A Review on mechanical and tribological behaviors of stir cast aluminum matrix composites, Procedia Mater Sci, 6, 1951, 10.1016/j.mspro.2014.07.229

Jain, 2014, Review on machining of aluminium metal matrix composites, Mater Sci Res India, 11, 114, 10.13005/msri/110204

Munir, 2015, Carbon nanotube reinforced titanium metal matrix composites prepared by powder metallurgy—a review, Crit Rev Solid State Mater Sci, 40, 38, 10.1080/10408436.2014.929521

Ramnath, 2014, Aluminum metal matrix composites - a review, Rev Adv Mater Sci, 38, 55

Casati, 2014, Metal matrix composites reinforced by nano-particles—a review, Metals, 4, 65, 10.3390/met4010065

Hufenbach, 2009, Development of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods, J Achievements Mater Manuf Eng, 35, 177

Mustafa, 2010, Abrasive wear of continuous fibre reinforced Al and Al-alloy metal matrix composites, Jordan J Mech Ind Eng, 4, 246

Daoud, 2005, Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration, Mater Sci Eng A, 391, 114, 10.1016/j.msea.2004.08.075

Nayeb-Hashemi, 1989, Study of the interface and its effect on mechanical properties of continuous graphite fiber-reinforced 201 aluminum, Metall Trans A, 20, 727, 10.1007/BF02667590

Coleman, 1994, Corrosion behaviour of aluminium-based metal matrix composites, J Mater Sci, 29, 2826, 10.1007/BF01117589

Davenport, 1997, Response of fibre reinforced aluminium-lithium laminates to different fatigue conditions, J Mater Sci, 32, 6555, 10.1023/A:1018619512832

Łągiewka, 2015, Properties of AlSi9Mg alloy matrix composite reinforced with short carbon fibre after remelting, Arch Foundry Eng, 15, 39, 10.1515/afe-2015-0056

Lerch, 1998

Wang, 1994, Evaluation of in situ mechanical properties of composites by using nanoindentation techniques, Acta Metall Mater, 42, 695, 10.1016/0956-7151(94)90267-4

Vassel, 1999, Continuous fibre reinforced titanium and aluminium composites: a comparison, Mater Sci Eng, A, 263, 305, 10.1016/S0921-5093(98)01161-7

Rangaswamy, 2000, Texture and residual strain in two SiC/Ti-6-2-4-2 titanium composites, Metall Mater Trans A, 31, 889, 10.1007/s11661-000-0032-3

Gundel, 1994, The influence of defects on the response of titanium/SiC fiber composites to thermal exposure, Compos Eng, 4, 47, 10.1016/0961-9526(94)90008-6

Draper, 1992, Effect of fiber strength on the room temperature, Metall Trans A, 23, 2541, 10.1007/BF02658057

Krishnamurthy, 1998, Modification of transverse creep behavior of an orthorhombic titanium aluminide based Ti-22Al-23Nb/SiC f composite using heat treatment, Mater Sci Eng, A, 243, 285, 10.1016/S0921-5093(97)00815-0

Yang, 1998, Interfacial reaction and stability of SCS-6 SiC/Ti-25Al-10NB-3V-1MO composites, Mater Sci Eng, A, 246, 213, 10.1016/S0921-5093(97)00749-1

Kleine, 1995, Interface formation in carbon fibre reinforced magnesium alloys (AZ91), J Mater Sci Lett, 14, 358, 10.1007/BF00592149

Viala, 2000, The chemical behaviour of carbon fibres in magnesium base Mg-Al alloys, J Mater Sci, 35, 1813, 10.1023/A:1004745006226

Korb, 1998, Thermal expansion behaviour of unidirectional carbon-fibre-reinforced copper-matrix composites, Compos A Appl Sci Manuf, 29, 1563, 10.1016/S1359-835X(98)00066-9

Jun, 2010, Tensile and friction properties of tin bronze matrix composites reinforced by carbon fibers, Tribol Lett, 40, 311, 10.1007/s11249-010-9670-9

Xu, 2006, High temperature simulation of short carbon fiber-reinforced nickel base composite, Mater Des, 27, 1152, 10.1016/j.matdes.2005.02.015

Ho, 1997, Wear of carbon fibre-reinforced tin-lead alloy composites, J Mater Sci Lett, 16, 1767, 10.1023/A:1018535827814

Chengfu, 1987, The mechanical properties of carbon fibre reinforced zinc base alloy composite, Compos Struct, 4, 98

Delannay, 1993, Processing and properties of metal matrix composites reinforced with continuous fibres for the control of thermal expansion, creep resistance and fracture toughness, Le Journal de Physique IV, 3, 1675

Harris, 1988, Cast metal matrix composites, Mater Sci Technol, 4, 231, 10.1179/mst.1988.4.3.231

Ibrahim, 1991, Particulate reinforced metal matrix composites - a review, J Mater Sci, 26, 1137, 10.1007/BF00544448

Wang, 2012, Reinforcement with graphene nanosheets in aluminum matrix composites, Scr Mater, 66, 594, 10.1016/j.scriptamat.2012.01.012

Akramifard, 2014, Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing, Mater Des, 54, 838, 10.1016/j.matdes.2013.08.107

Dash, 2012, Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering, J Alloys Compd, 516, 78, 10.1016/j.jallcom.2011.11.136

Ritasalo, 2011, The microstructural effects on the mechanical and thermalproperties of pulsed electric current sintered Cu-Al2O3 composites, Procedia Eng, 10, 124, 10.1016/j.proeng.2011.04.023

Wang, 2010, Effect of Al2O3 content on electrical breakdown properties of Al2O3/Cu composite, J Mater Eng Perform, 19, 1330, 10.1007/s11665-010-9607-3

Nachum, 2010, The microstructural basis for the mechanical properties and electrical resistivity of nanocrystalline Cu-Al2O3, Mater Sci Eng A, 527, 5065, 10.1016/j.msea.2010.04.070

Fathy, 2012, Compressive and wear resistance of nanometric alumina reinforced copper matrix composites, Mater Des, 36, 100, 10.1016/j.matdes.2011.10.021

Gopalakrishnan, 2012, Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method, Compos B Eng, 43, 302, 10.1016/j.compositesb.2011.08.049

Liu, 2013, Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing, Mater Des, 45, 343, 10.1016/j.matdes.2012.08.036

Boopathi, 2013, Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites, Am J Appl Sci, 10, 219, 10.3844/ajassp.2013.219.229

Chu, 2013, Improvement of interface and mechanical properties in carbon nanotube reinforced Cu-Cr matrix composites, Mater Des, 45, 407, 10.1016/j.matdes.2012.09.027

Pérez-Bustamante, 2009, Microstructural and mechanical characterization of Al-MWCNT composites produced by mechanical milling, Mater Sci Eng, A, 502, 159, 10.1016/j.msea.2008.10.047

He, 2009, Mechanical properties and microstructures of carbon nanotube-reinforced Al matrix composite fabricated by in situ chemical vapor deposition, J Alloys Compd, 487, 258, 10.1016/j.jallcom.2009.07.099

Goh, 2006, Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes, Mater Sci Eng A, 423, 153, 10.1016/j.msea.2005.10.071

Su, 2012, Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites, Mater Des, 36, 590, 10.1016/j.matdes.2011.11.064

Liu, 2012, Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing, Carbon, 50, 1843, 10.1016/j.carbon.2011.12.034

Tang, 2008, Friction and wear properties of copper matrix composites reinforced with short carbon fibers, Mater Des, 29, 257, 10.1016/j.matdes.2006.11.011

Dong, 2001, An investigation of the sliding wear behavior of Cu-matrix composite reinforced by carbon nanotubes, Mater Sci Eng A, 313, 83, 10.1016/S0921-5093(01)00963-7

Chen, 2003, Tribological application of carbon nanotubes in a metal-based composite coating and composites, Carbon, 41, 215, 10.1016/S0008-6223(02)00265-8

Kim, 2007, Hardness and wear resistance of carbon nanotube reinforced Cu matrix nanocomposites, Mater Sci Eng A, 449–451, 46, 10.1016/j.msea.2006.02.310

Rajkumar, 2011, Tribological studies on microwave sintered copper-carbon nanotube composites, Wear, 270, 613, 10.1016/j.wear.2011.01.017

Guiderdoni, 2011, The preparation of double-walled carbon nanotube/Cu composites by spark plasma sintering and their hardness and friction properties, Carbon, 49, 4535, 10.1016/j.carbon.2011.06.063

Tu, 2001, Tribological properties of carbon-nanotube-reinforced copper composites, Tribol Lett, 10, 225, 10.1023/A:1016662114589

Zhou, 2007, Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique, Compos Part Appl Sci Manuf, 38, 301, 10.1016/j.compositesa.2006.04.004

Kováčik, 2008, Effect of composition on friction coefficient of Cu-graphite composites, Wear, 265, 417, 10.1016/j.wear.2007.11.012

Tang, 2008, Friction and wear properties of copper matrix composites reinforced with short carbon fibers, Mater Des, 29, 257, 10.1016/j.matdes.2006.11.011

Chen, 2006, Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits, Tribol Int, 39, 22, 10.1016/j.triboint.2004.11.008

Wang, 2003, Friction and wear behavior of electroless Ni-based CNT composite coatings, Wear, 254, 1289, 10.1016/S0043-1648(03)00171-6

Prasad, 2004, Aluminum metal-matrix composites for automotive applications: tribological considerations, Tribol Lett, 17, 445, 10.1023/B:TRIL.0000044492.91991.f3

Carpenter, 2011, Electrodeposition of nickel-carbon nanotube nanocomposite coatings for enhanced wear resistance, Wear, 271, 2100, 10.1016/j.wear.2011.01.068

Arai, 2008, Excellent solid lubrication of electrodeposited nickel-multiwalled carbon nanotube composite films, Mater Lett, 62, 3545, 10.1016/j.matlet.2008.03.047

Dai, 2008, Mechanical properties and microstructure of nanocrystalline nickel-carbon nanotube composites produced by electrodeposition, Mater Sci Eng A, 483–484, 172, 10.1016/j.msea.2006.09.152

Meléndez, 2010, Consolidation of titanium matrix composites to maximum density by different hot pressing techniques, Mater Sci Eng, A, 527, 4466, 10.1016/j.msea.2010.03.093