Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites

Journal of Materials Science - Tập 50 - Trang 1082-1093 - 2014
Fuzhong Wang1,2, Lawrence T. Drzal2, Yan Qin1, Zhixiong Huang1
1School of Material Science and Engineering, Wuhan University of Technology, Wuhan, China
2Chemical Engineering and Materials Science, Composite Materials and Structures Center, Michigan State University, East Lansing, USA

Tóm tắt

Nanocomposites of epoxy with 3 and 5 wt% graphene nanoplatelets (GnPs) were fabricated with GnP sizes of ~5 and <1 μm dispersed within an epoxy resin using a sonication process followed by three-roll milling. The morphology, mechanical, and thermal properties of the composites were investigated. Tensile and flexural properties measurements of these nanocomposites indicated higher modulus and strength with increasing concentration of small GnPs sizes (<1 μm, GnP-C750). The incorporation of larger GnPs sizes (~5 μm, GnP-5) significantly improved the tensile and flexural modulus but reduced the strength of the resulting composites. At 35 °C, the dynamic storage modulus of GnP-5/epoxy composites increased with increasing platelet concentration, and improved by 12 % at 3 wt% and 23 % at 5 wt%. The smaller GnP-C750 increased the storage modulus by 5 % at 3 wt% loading but only 2 % at 5 wt% loading. The glass transition temperatures of the composites increased with increasing platelet concentration regardless of the GnP particle size. A marked improvement in thermal conductivity was measured with the incorporation of the larger GnP size reaching 115 % at 5 wt% loading. The effects of different platelet sizes of the GnP reinforcement on the damage mechanisms of these nanocomposites were studied by scanning electron microscopy.

Tài liệu tham khảo

Shokrieh M, Esmkhani M, Shahverdi HR, Vahedi F (2013) Effect of graphene nanosheets (GNS) and graphite nanoplatelets (GNP) on the Mechanical properties of epoxy nanocomposites. Sci Adv Mater 5(3):260–266 Dang ZM, Yuan JK, Zha JW, Zhou T, Li ST, Hu GH (2012) Fundamentals, processes and applications of high-permittivity polymer-matrix composites. Prog Mater Sci 57(4):660–723 Novoselov KS, Geim AK, Morozov SV, Jiang D, Zhang Y, Dubonos SV, Grigorieva IV, Firsov AA et al (2004) Electric field effect in atomically thin carbon films. Science 306(5696):666–669 Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321:385–388 Balandin AA, Ghosh S, Bao W, Calizo I, Teweldebrhan D, Miao F, Lau CN (2008) Superior thermal conductivity of single-layer graphene. Nano Lett 8(3):902–907 Giannelis EP (1996) Polymer layered silicate nanocomposites. Adv Mater 8(1):29–35 Chen GH, Wu DJ, Weng WG, He B, Yan WL (2001) Preparation of polymer/graphite conducting nanocomposite by intercalation polymerization. J Appl Polym Sci 82:2506–2513 Yasmin A, Daniel IM (2004) Mechanical and thermal properties of graphite platelet/epoxy composites. Polymer 45:8211–8219 Sandler JKW, Pegel S, Cadek M, Gojny F, Es MV, Lohmar J et al (2004) A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres. Polymer 45(6):2001–2015 Li B, Zhong WH (2011) Review on polymer/graphite nanoplatelet nanocomposites. J Mater Sci 46:5595–5614. doi:10.1007/s10853-011-5572-y XG Sciences, Inc. www.xgsciences.com Singh S, Srivastava VK, Prakash R (2014) Influences of carbon nanofillers on mechanical performance of epoxy resin polymer. Appl Nano Sci. doi:10.1007/s1320401403190 Chatterjee S, Wang JW, Kuo WS, Tai NH, Salzmann C, Li WL et al (2012) Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites. Chem Phys Lett 531:6–10 Teng CC, Ma CCM, Lu CH, Yang SY, Lee SH, Hsiao MC et al (2011) Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites. Carbon 49:5107–5116 Rafiee MA, Rafiee J, Srivastava I, Wang Z, Song H, Yu Z, Koratkar N (2009) Fracture and fatigue in graphene nanocomposites. Small 6(2):179–183 Zaman I, Phan TT, Kuan HC, Meng QS, La LTB, Lee L et al (2011) Epoxy/graphene platelets nanocomposites with two levels of interface strength. Polymer 52:1603–1611 Chatterjee S, Nafezarefi F, Tai NH, Schlagenhauf L, Nuesch FA, Chu BTT (2012) Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites. Carbon 50:5380–5538 Ferrari AC (2007) Raman spectroscopy of graphene and graphite: disorder, electron- phonon coupling, doping and nonadiabatic effects. Solid State Commun 143:47–57 Halpin J (1969) Stiffness and expansion estimates for oriented short fiber composites. J Compos Mater 3(4):732–734 Mori T, Tanaka K (1973) Average stress in matrix and average elasticenergy of materials with misfitting inclusions. Acta Metall 21(5):571–574 Cox H (1952) The elasticity and strength of paper and other fibrous materials. Br J Appl Phys 3:72–79 Gao XL, Li K (2005) A shear-lag model for carbon nanotube-reinforced polymer composites. Int J Solids Struct 42(5–6):1649–1667 Kim H, Miura Y, Macosko CW (2010) Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity. Chem Mater 22(11):3441–3450 Liang J, Huang Y, Zhang L, Wang Y, Ma Y, Guo T et al (2009) Molecular-level dispersion of graphene into poly(vinyl alcohol) and effective reinforcement of their nanocomposites. Adv Funct Mater 19(14):2297–2302 Zaman I, Manshoor B, Khalid A, Meng QS, Araby S (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. J Mater Sci 49:5856–5865. doi:10.1007/s10853-014-8296-y King JA, Klimek DR, Miskioglu I, Odegard GM (2014) Mechanical properties of graphene nanoplatelet/epoxy composites. J Compos Mater. doi:10.1177/0021998314522674 King JA, Klimek DR, Miskioglu I, Odegard GM (2013) Mechanical properties of graphene nanoplatelet/epoxy composites. Appl Polym Sci 128(6):4217–4223 Tang LC, Wan YJ, Yan D, Pei YB, Zhao L, Li YB et al (2013) The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites. Carbon 60:16–27 Jana S, Zhong WH (2009) Curing characteristics of an epoxy resin in the presence of ball-milled graphite particles. J Mater Sci 44(8):1987–1997. doi:10.1007/s10853-009-3293-2 Wang K, Chen L, Wu JS, Toh ML, He CB, Yee AF (2005) Epoxy nanocomposites with highly exfoliated clay: mechanical properties and fracture mechanisms. Macromolecules 38:788–800 Becker O, Varley R, Simon G (2002) Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resins. Polymer 43(16):4365–4373 Yang SY, Ma CCM, Teng CC, Huang YW, Liao SH, Huang YL et al (2010) Effect of functionalized carbon nanotubes on the thermal conductivity of epoxy composites. Carbon 48(3):592–603 Biercuk MJ, Llaguno MC, Radosavljevic M, Hyun JK, Johnson AT, Fischer JE (2002) Carbon nanotube composites for thermal management. Appl Phys Lett 80(15):2767–2769 Yan HY, Tang YX, Long W, Li YF (2014) Enhanced thermal conductivity in polymer composites with aligned graphene nanosheets. J Mater Sci 49:5256–5264. doi:10.1007/s10853-014-8198-z Chu K, Li WS, Dong HF (2013) Role of graphene waviness on the thermal conductivity of graphene composites. Appl Phys A 111:221–225 Xiang JL, Drzal LT (2011) Thermal conductivity of exfoliated graphite nanoplatelet paper. Carbon 49:773–778 Wang S, Tambraparni M, Qiu J, Tipton J, Dean D (2009) Thermal expansion of graphene composites. Macromolecules 42(14):5251–5255