Effect of micro combustor geometry on combustion and emission behavior of premixed hydrogen/air flames

Energy - Tập 135 - Trang 585-597 - 2017
Harun Yilmaz1, Omer Cam2, Ilker Yilmaz2
1Department of Airframes and Powerplants, Civil Aviation College, Erzincan University, Erzincan, 24100, Turkey
2Department of Airframes and Powerplants, Faculty of Aeronautics and Astronautics, Erciyes University, Kayseri 38039 Turkey

Tài liệu tham khảo

Li, 2009, A numerical study on premixed micro-combustion of CH4–air mixture: effects of combustor size, geometry and boundary conditions on flame temperature, Chem Eng J, 150, 213, 10.1016/j.cej.2009.02.015 Fernandez-Pello, 2002, Micropower generation using combustion: issues and approaches, Proc Combust Inst, 29, 883, 10.1016/S1540-7489(02)80113-4 Akhtar, 2015, A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application, Appl Energy, 152, 47, 10.1016/j.apenergy.2015.04.068 Jiang, 2015, Effects of H2/CO blend ratio on radiated power of micro combustor/emitter, Appl Therm Eng, 86, 178, 10.1016/j.applthermaleng.2015.04.052 Wenming, 2005, Effect of wall thickness of micro-combustor on the performance of micro-thermophotovoltaic power generators, Sens Actuat A Phys, 119, 441, 10.1016/j.sna.2004.10.005 Zuo, 2017, Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness, Appl Therm Eng, 113, 1011, 10.1016/j.applthermaleng.2016.11.074 Hua, 2005, Numerical simulation of the combustion of hydrogen–air mixture in micro-scaled chambers. Part I: fundamental study, Chem Eng Sci, 60, 3497, 10.1016/j.ces.2005.01.041 Zuo, 2017, Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor, Energy, 126, 1, 10.1016/j.energy.2017.03.011 Feng, 2010, Numerical study of methane and air combustion inside a small tube with an axial temperature gradient at the wall, Appl Therm Eng, 30, 2804, 10.1016/j.applthermaleng.2010.08.014 Xia, 2015, Investigation of the enhancement effect of heat transfer using micro channel, Energy Proced, 75, 912, 10.1016/j.egypro.2015.07.234 Chmielewski, 2017, Impact of variable geometry combustor on performance and emissions from miniature gas turbine engine, J Energy Inst, 90, 1743 Chen, 2017, Optimal combustor dimensions for the catalytic combustion of methane-air mixtures in micro-channels, Energy Convers Manag, 134, 197, 10.1016/j.enconman.2016.12.028 Di Benedetto, 2010, Effect of geometry on the thermal behavior of catalytic micro-combustors, Catal Today, 155, 116, 10.1016/j.cattod.2009.01.048 Lei, 2016, Combustion and direct energy conversion inside a micro-combustor, Appl Therm Eng, 100, 348, 10.1016/j.applthermaleng.2016.01.162 Hosseini, 2014, Investigation of bluff-body micro-flameless combustion, Energy Convers Manag, 88, 120, 10.1016/j.enconman.2014.08.023 Wan, 2016, Effect of the length of a plate flame holder on flame blowout limit in a micro-combustor with preheating channels, Combust Flame, 170, 53, 10.1016/j.combustflame.2016.05.015 Jiménez, 2017, Propagation of symmetric and non-symmetric lean hydrogen–air flames in narrow channels: influence of heat losses, Proc Combust Inst, 36, 1559, 10.1016/j.proci.2016.06.066 Zhou, 2009, Improvement of micro-combustion stability through electrical heating, Appl Therm Eng, 29, 2373, 10.1016/j.applthermaleng.2008.12.005 Miyata, 2015, Direct numerical simulation of micro combustion in a narrow circular channel with a detailed kinetic mechanism, Proc Combust Inst, 35, 3421, 10.1016/j.proci.2014.07.057 Li, 2017, Combustion characteristics of non-premixed methane micro-jet flame in coflow air and thermal interaction between flame and micro tube, Appl Therm Eng, 112, 296, 10.1016/j.applthermaleng.2016.10.082 Khandelwal, 2010, Experimental investigations on flame stabilization behavior in a diverging micro channel with premixed methane–air mixtures, Appl Therm Eng, 30, 2718, 10.1016/j.applthermaleng.2010.07.023 Wang, 2011, Instability of flame in micro-combustor under different external thermal environment, Exp Therm Fluid Sci, 35, 1451, 10.1016/j.expthermflusci.2011.06.003 Alipoor, 2016, Asymmetric hydrogen flame in a heated micro-channel: role of Darrieus–Landau and thermal-diffusive instabilities, Int J Hydrogen Energy, 41, 20407, 10.1016/j.ijhydene.2016.09.099 Tang, 2015, Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates, Int J Hydrogen Energy, 40, 2396, 10.1016/j.ijhydene.2014.12.018 Su, 2016, Numerical study on a multiple-channel micro combustor for a micro-thermophotovoltaic system, Energy Convers Manag, 120, 197, 10.1016/j.enconman.2016.04.088 Zuo, 2017, Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for micro-thermophotovoltaic system, Energy, 122, 408, 10.1016/j.energy.2017.01.079 Wan, 2014, The impact of channel gap distance on flame splitting limit of H2/air mixture in microchannels with wall cavities, Int J Hydrogen Energy, 39, 11308, 10.1016/j.ijhydene.2014.05.113 Wan, 2015, Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities, Energy Convers Manag, 96, 605, 10.1016/j.enconman.2015.03.030 Su, 2015, Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system, Energy Convers Manag, 106, 173, 10.1016/j.enconman.2015.09.043 Ran, 2015, Numerical investigations on characteristics of methane catalytic combustion in micro-channels with a concave or convex wall cavity, Energy Convers Manag, 97, 188, 10.1016/j.enconman.2015.03.058 Yang, 2002, Combustion in micro-cylindrical combustors with and without a backward facing step, Appl Therm Eng, 22, 1777, 10.1016/S1359-4311(02)00113-8 Sahota, 2011, Experimental investigations on a new active swirl based microcombustor for an integrated micro-reformer system, Energy Convers Manag, 52, 3206, 10.1016/j.enconman.2011.05.007 Bagheri, 2014, Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen–air mixture, Appl Therm Eng, 67, 266, 10.1016/j.applthermaleng.2014.03.040 Yan, 2015, Numerical study of the geometrical parameters on CH4/air premixed combustion in heat recirculation micro-combustor, Fuel, 159, 45, 10.1016/j.fuel.2015.06.069 Kim, 2016, Effects of noncircular air holes on reacting flow characteristics in a micro can combustor with a seven-hole baffle, Appl Therm Eng, 100, 378, 10.1016/j.applthermaleng.2016.02.004 Sarath, 2016, Flow field predictions of bluff body introduced micro combustor, Proced Technol, 24, 420, 10.1016/j.protcy.2016.05.058 Rana, 2014, Thermodynamics of premixed combustion in a heat recirculating micro combustor, Energy, 68, 510, 10.1016/j.energy.2014.02.070 Yang, 2014, Experimental and numerical investigations of hydrogen–air premixed combustion in a converging–diverging micro tube, Int J Hydrogen Energy, 39, 3469, 10.1016/j.ijhydene.2013.12.102 Wan, 2014, A numerical investigation on combustion characteristics of H2/air mixture in a micro-combustor with wall cavities, Int J Hydrogen Energy, 39, 8138, 10.1016/j.ijhydene.2014.03.116 Zarvandi, 2012, Numerical study of the effects of heat transfer methods on CH4/(CH4+H2)-Air pre-mixed flames in a micro-stepped tube, Energy, 44, 396, 10.1016/j.energy.2012.06.015 Sakurai, 2009, Heat loss reduction and hydrocarbon combustion in ultra-micro combustors for ultra-micro gas turbines, Proc Combust Inst, 32, 3067, 10.1016/j.proci.2008.06.002 Yuasa, 2005, Concept and combustion characteristics of ultra-micro combustors with premixed flame, Proc Combust Inst, 30, 2455, 10.1016/j.proci.2004.08.207 Cao, 2007, Thermal performance of a micro-combustor for micro-gas turbine system, Energy Convers Manag, 48, 1569, 10.1016/j.enconman.2006.11.022 Li, 2008, Experimental investigation on heat loss and combustion in methane/oxygen micro-tube combustor, Appl Therm Eng, 28, 707, 10.1016/j.applthermaleng.2007.06.001 Chia, 2007, The development of a micropower (micro-thermophotovoltaic) device, J Power Sources, 165, 455, 10.1016/j.jpowsour.2006.12.006 Oztop, 2012, Analysis of turbulent flow and heat transfer over a double forward facing step with obstacles, Int Commun Heat Mass Transf, 39, 1395, 10.1016/j.icheatmasstransfer.2012.07.011 Cai, 2016, Effect of combustor geometry and fuel injection scheme on the combustion process in a supersonic flow, Acta Astronaut, 129, 44, 10.1016/j.actaastro.2016.08.034 Yılmaz, 2006, Turbulence forced convection heat transfer over double forward facing step flow, Int Commun Heat Mass Transf, 33, 508, 10.1016/j.icheatmasstransfer.2005.08.015 Nemitallah, 2016, Investigation of a turbulent premixed combustion flame in a backward-facing step combustor; effect of equivalence ratio, Energy, 95, 211, 10.1016/j.energy.2015.12.010 Mazaheri, 2016, Numerical optimization of laboratory combustor geometry for NO suppression, Appl Therm Eng, 102, 1328, 10.1016/j.applthermaleng.2016.04.027 Fluent Incorporated, 2013 Yang, 2016, Effect of inlet temperature on combustion efficiency of lean H2/air mixtures in a micro-combustor with wall cavities, Appl Therm Eng, 107, 837, 10.1016/j.applthermaleng.2016.07.036 Fursenko, 2010, Characteristic regimes of premixed gas combustion in high-porosity micro-fibrous porous media, Combust Theory Model, 14, 571, 10.1080/13647830.2010.502249 Pan, 2010, Micro combustion in sub-millimeter channels for novel modular thermophotovoltaic power generators, J Micromech Microeng, 125021, 20 Norton, 2003, Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures, Chem Eng Sci, 58, 4871, 10.1016/j.ces.2002.12.005 Yilmaz, 2017, Effect of different turbulence models on combustion and emission characteristics of hydrogen/air flames, Int J Hydrogen Energy Markatou, 1991, The influence of surface chemistry on the development of minor species profiles in the premixed boundary layer combustion of an H2/air mixture, Combust Sci Technol, 79, 247, 10.1080/00102209108951769 Jiaqiang, 2016, Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor, Energy Convers Manag, 124, 427, 10.1016/j.enconman.2016.07.048 Habib, 2014, Numerical investigations of combustion and emissions of syngas as compared to methane in a 200 MW package boiler, Energy Convers Manag, 83, 296, 10.1016/j.enconman.2014.03.056 Chen, 2007, Effects of catalytic walls on hydrogen/air combustion inside a micro-tube, Appl Catal A General, 332, 89, 10.1016/j.apcata.2007.08.011 Di Benedetto, 2009, A novel catalytic-homogenous micro-combustor, Catal Today, 147, 156, 10.1016/j.cattod.2009.07.030 Oran, 2005 Norton, 2004, A CFD study of propane/air microflame stability, Combust Flame, 138, 97, 10.1016/j.combustflame.2004.04.004 Tang, 2015, Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor, Chem Eng Sci, 131, 235, 10.1016/j.ces.2015.03.030 Can, 2016, Novel high multilevel inverters investigated on simulation, Electr Eng, 1 Can, 2016, SSPWM three phase inverter design and experimented on unbalanced loads, Int Conf Tehnički Vjesnik, 23, 1239 Can, 2016, PID and fuzzy controlling three phase asynchronous machine by low level DC source three phase inverter, Tech Gaz, 23, 753