A novel orientation measurement using optical sensor for spherical motor
Tóm tắt
The measurement of spherical rotor orientation is crucial to the close-loop control of spherical motors. This paper presents a novel method for the measuring of three-degree-of-freedom (DOF) rotor orientation of spherical motors using optical sensors. The spatial orientation of spherical rotor is output in the form of ZXZ Euler angles. Firstly, the structure of the measuring system composed of optical sensors and the patterns on the rotor surface are presented, and the operational principle of recognizing intersection points between the optical ring detectors and the latitude/longitude on the rotor surface is illustrated. The analytical model of input-output characteristic is established for the measuring system of three-DOF rotor orientation. Afterwards, the effect of parameters of the optical ring detectors on the linearity, sensitivity, resolving power and measuring range of the measuring system is analyzed using the analytical model. Finally, the feasibility of the measurement is validated through experiments of prototype measuring system. The analysis is expected to be a basis for the design parameter optimization of the orientation measuring system of a PM spherical motor.
Tài liệu tham khảo
Lee H J, Park H J, Ryu G H, et al. Performance improvement of operating three-degree-of-freedom spherical permanent-magnet motor. IEEE T Magn, 2012, 48(11): 4654–4657
Choe Y Y, Lee H J, Cho S Y, et al. A study on improvement efficiency of surfaced permanent magnet spherical motor. In: Proceedings of International Electrical Machines and Systems Conference, Beijing, 2011. 1–4
Kang D W, Kim W H, Go S C, et al. Method of current compensation for reducing error of holding torque of permanent-magnet spherical wheel motor. IEEE T Magn, 2009, 45(6): 2819–2822
Kahlen K, Voss I, Priebe C, et al. Torque control of a spherical machine with variable pole pitch. IEEE T Power Electr, 2004, 19(6): 1628–1634
Yano T. Basic characteristics of a hexahedron-octahedron based spherical stepping motor. In: Proceedings of International Power Electronics Electrical Drives Automation Motion Symposium, Pisa, 2010. 1748–1753
Yano T, Suzuki T. Basic characteristics of the small spherical stepping motor. In: Proceedings of IEEE/RSJ International Intelligent Robots and Systems Conference, Lausanne, 2002. 1980–1985
Son H, Lee K M. Open-loop controller design and dynamic characteristics of a spherical wheel motor. IEEE T Indust Electr, 2010, 57(10): 3475–3482
Lee K M, Bai K, Lim J. Dipole models for forward/inverse torque computation of a spherical motor. IEEE/ASME T Mechatr, 2009, 14(1): 46–54
Lim C K, Chen I-M, Yan L, et al. Electromechanical modeling of a permanent-magnet spherical actuator based on magnetic-dipolemoment principle. IEEE T Indus Electr, 2009, 56(5): 1640–1648
Yan L, Chen I, Lim C, et al. Design and analysis of a permanent magnet spherical actuator. IEEE/ASME T Mechatr, 2008, 13(2): 239–248
Xia C L, Li H F, Shi T. 3-D magnetic field and torque analysis of a novel Halbach array permanent-magnet spherical motor. IEEE T Mag, 2008, 44(8): 2016–2020
Chirikjian G S, Stein D. Kinematic Design and commutation of a spherical stepper motor. IEEE/ASME T Mechatr, 1999, 4(4): 342–353
Wang W, Wang J, Jewell G W, et al. Design and control of a novel spherical permanent magnet actuator with three degrees of freedom. IEEE/ASME T Mechatr, 2003, 8(4): 457–468
Lee K M, Son H, Joni J. Concept development and design of a spherical wheel motor (SWM). In: Proceedings of IEEE International Robotics and Automation Conference, Barcelona, 2005. 3652–3657
Lee D V, Velinsky S A. Analysis and experimental verification of a three-dimensional noncontacting angular motion sensor. IEEE/ASME T Mechatr, 2007, 12(6): 612–622
Lim C K, Chen I M. A novel 3-DOF sensing methodology for spherical actuator. In: Proceedings of IEEE/ASME International Advanced Intelligent Mechatronics Conference, Zurich, 2007. 1–6
Lee K M, Blenis R. Design concept and prototype development of a flexible integrated vision system. J Rob Syst, 1994, 11(5): 387–398
Lee K M. Orientation sensing system and method for a spherical body. U.S. Patent no. 5319577, 1994
Garner H, Klement M, Lee K M. Design and analysis of an absolute non-contact orientation sensor for wrist motion. In: Proceedings of IEEE/ASME International Advanced Intelligent Mechatronics Conference, Como, 2001. 69–74
Wang Q J, Qian Z, Li G L. Vision based orientation detection method and control of a spherical motor. In: Proceedings of 53rd IEEE International Midwest Circuits and Systems Symposium, Seattle, 2010. 1145–1148
Kumagai M, Hollis R L. Development of a three-dimensional ball rotation sensing system using optical mouse sensors. In: Proceedings of IEEE International Robotics and Automation Conference, Shanghai, 2011. 5038–5043
Lee K M, Zhou D B. A real-time optical sensor for simultaneous measurement of three-DOF motions. IEEE/ASME T Mechatr, 2004, 9(3): 499–507
Stein D, Scheinerman E R, Chirikjian G S. Mathematical Models of Binary Spherical Encoders. IEEE/ASME T Mechatr, 2003, 8(2): 234–244
Stein D, Cliirikjian G S, Scheinerman E R. Theory, design, and implementation of a spherical encoder. In: Proceedings of IEEE International Robotics and Automation Conference, Seoul, 2001. 1773–1779
Mashimo T, Awaga K, Toyama S. Development of a spherical ultrasonic motor with an attitude sensing system using optical fibers. In: Proceedings of IEEE International Robotics and Automation Conference, Roma, 2007. 4466–4471
Yan L, Chen I-M, Guo Z W, et al. A multi-degree-of-freedom orientation measurement methodology with laser detection. In: Proceedings of IEEE/ASME International Advanced Intelligent Mechatronics Conference, Singapore, 2009. 487–492