Precast segments under TBM hydraulic jacks: Experimental investigation on the local splitting behavior

Bonalumi, P., Di Prisco, M., Meda, A., 2014. Indagine sperimentale su conci di tunnel in calcestruzzo fibrorinforzato con macro-fibre polimeriche. Atti del 20°convegno CTE, Collegio Tecnici dell’Edilizia, pp. 367–378 (in Italian). Buratti, 2011, Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes, Constr. Build. Mater., 25, 2713, 10.1016/j.conbuildmat.2010.12.022 Caratelli, 2011, Structural behaviour of precast tunnel segments in fiber reinforced concrete, Tunn. Undergr. Space Technol., 26, 284, 10.1016/j.tust.2010.10.003 Chiaia, 2009, Combining fiber-reinforced concrete with traditional reinforcement in tunnel linings, Eng. Struct., 31, 1600, 10.1016/j.engstruct.2009.02.037 Conforti, A., Minelli, F., Tinini, A., Plizzari, G.A., Moro, S., 2014. Structural applicability of polypropylene fibres: deep and wide-shallow beams subjected to shear. In: FRC 2014 Joint ACI-fib International Workshop, Montreal, Canada, pp. 341–356. Conforti, 2015, Influence of polypropylene fibre reinforcement and width-to-effective depth ratio in wide-shallow beams, Eng. Struct., 88, 12, 10.1016/j.engstruct.2015.01.037 Dupont, 2005, Distribution of steel fibres in rectangular sections, Cem. Concr. Compos., 27, 391, 10.1016/j.cemconcomp.2004.03.005 EN 12350-2, 2009. Testing Fresh Concrete – Part 2: Slump-Test. EN 14651, 2005. Precast Concrete Products – Test Method for Metallic Fibre Concrete – Measuring the Flexural Tensile Strength. European Standard. Ferrara, 2006, Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements, Mater. Struct., 39, 411, 10.1617/s11527-005-9017-4 Ferrara, 2008, Correlation among fresh state behavior, fiber dispersion and toughness properties of SFRCs, J. Mater. Civ. Eng., 20, 493, 10.1061/(ASCE)0899-1561(2008)20:7(493) fib Bulletin 65, 2012a. “Model Code 2010 – Final Draft”, vol. 1, 350 p (ISBN 978-2-88394-105-2). fib Bulletin 66, 2012b. Model Code 2010 – Final Draft”, vol. 2, 370 p (ISBN 978-2-88394-106-9). Grünewald, S., 2004. Performance-based Design of Self-compacting Fibre Reinforced Concrete. PhD Thesis, Delft University of Technology, Delft University Press (ISBN 90-407-2487-3). Guglielmetti, 2007, 507 Iyengar, 1962, Two-dimensional theories in anchorage zone stresses in post tensioned prestressed beams, J. Am. Concr. Inst., 59, 1443 ITA, International Tunneling Association, Official Report, 2000, Guidelines for the design of shield tunnel lining, Tunnel. Undergr. Space Technol., 15, 303, 10.1016/S0886-7798(00)00058-4 Laranjerira, 2011, Characterization of the orientation profile of steel fiber reinforced concrete, Mater. Struct., 44, 1093, 10.1617/s11527-010-9686-5 Lataste, 2008, Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements, NDT&E Int., 41, 638, 10.1016/j.ndteint.2008.03.008 Leonhardt, 1973 Liao, 2015, Design of FRC tunnel segments considering the ductility requirements of the Model Code 2010, Tunn. Undergr. Space Technol., 47, 200, 10.1016/j.tust.2015.01.006 Plizzari, G.A., Tiberti, G., 2007. Structural behaviour of SFRC tunnel segments. In: Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCos), vol. 3, pp. 1577–1584 (ISBN 978-0-415-44066-0). Pujadas, 2014, Plastic fibres as the only reinforcement for flat suspended slabs: experimental investigation and numerical simulation, Constr. Build. Mater., 57, 92, 10.1016/j.conbuildmat.2014.01.082 Pujadas, 2014, Multidirectional double punch test to assess the post-cracking behaviour and fibre orientation, Constr. Build. Mater., 58, 214, 10.1016/j.conbuildmat.2014.02.023 Pujadas, 2014, Fibre distribution in macro-plastic fibre reinforced concrete slab-panels, Constr. Build. Mater., 64, 496, 10.1016/j.conbuildmat.2014.04.067 Recommendations of A.F.T.E.S., 1999. Recommendations for Design, Sizing, and Construction of Precast Segments Installed at the Rear of Tunnel Boring Machine. English Version. Recommendations of A.F.T.E.S. n.GT38R1A1, 2013. Design, dimensioning and execution of precast steel fibre reinforced concrete arch segments. Tunn. espace souterrain 238, 312–324. Recommendations of DAUB, 2014. Recommendations for the Design, Production and Installation of Segmental Rings. DAUB (German Tunneling Committee) Working Group “Lining Segment Design”. English Version. Rijke, Q.C. de, 2006. Innovation of Stress and Damage Reduction in Bored Tunnels during Construction Based on a Shield Equilibrium Model. Graduate Thesis, Utrecht, Delft University of Technology and Holland Railconsult. Schnütgen, B., 2003. Design of precast steel fiber reinforced tunnel elements. In: Proceedings of the RILEM TC 162-TDF Workshop, Test and Design Methods for Steel Fiber Reinforced Concrete – Background and Experiences, Bochum, Germany, pp. 145–152. Slenders, B.M.A., 2002. Modellering van boortunnels. Thesis, Delft University of Technology and Projectorganisatie HSL-Zuid, Utrecht (Dutch). Tiberti, G., 2014. Concrete tunnel segments with combined traditional and fiber reinforcement: optimization of the structural behavior and design aspects. Ph.D. Thesis, Department of Civil, Environmental, Architectural Engineering and Mathematics, University of Brescia, ISBN 978-88–548-7005-5, Aracne editrice s.r.l., Roma, Italy, 396 p. Tiberti, 2014, Reinforcement optimization of fiber reinforced concrete linings for conventional tunnels, Compos. Part B: Eng., 58, 199, 10.1016/j.compositesb.2013.10.012